8mm Isocheck Impact Mat 200 is an impact and airborne improvement system, a 8mm thick layer of Isofiba and barrier mat composite used over and beneath floorboards, joists and concrete decks.

Isocheck Impact Mat 200 (8mm x 1000mm x 1200mm) is designed to be used as a single layer or double layer over floorboards or concrete decks for conversion and refurbishment applications.

Impact Mat 200 can be used for listed buildings requiring minimal structural change with a new plasterboard or existing lath and plaster ceiling.

When installed as part of a complete party floor construction the system enables a timber floor to meet the sound transmission standards of Approved Document E 2003 and amendments.

The Isocheck Impact Mat 200 system is designed to reduce impact and airborne sound transmission through timber floors.

A single layer of Impact Mat 200 can also be used draped over joists and beneath floorboards.

Laboratory performance of Impact Mat 200 achieved 33dB ∆Lw for a single layer and 40dB ∆Lw for a double layer.

Performance of 18dB ∆Lw has been achieved for a single layer with a timber laminate floor over.

Site tests have also indicated the Airborne performance is also improved by 1 to 2dB DnT,w + Ctr.

Specification:

Thickness: 8mm

Width: 1000mm

Length: 1200mm

Size: 8mm x 1000mm x 1200mm

Profile: Underlay Roll

Material: Isofiba and barrier mat composite

8mm Isocheck Impact Mat 200 Features:

 · Acoustic underlay.

 · 1.2m2 tile coverage.

 · 1200mm x 1000mm tiles.

 · Only 8mm thick underlay.

 · Easy to install solution.

 · Soundproofing system.

 · Used over and beneath floorboards.

 · Used over joists and concrete decks.

 · Airborne and impact improvement system.

 · Designed to reduce sound transmission.

 · Acoustic solution for floor upgrades.

 · Made of Isofiba and barrier mat composite.

 · Can be used as a single layer or double layer.

 · Suitable for refurbishment and conversion projects.

 · Meet the sound transmission standards of Approved Document E 2003.

8mm Isocheck Impact Mat 200 (Acoustic Underlay) Installation Guidelines:

 · Ensure the sub-floor surface is smooth, dry and free from debris and any existing floor coverings such as vinyl or carpet tiles must be removed together with any adhesive residue.

 · Secure all loose floorboards ensuring all nails and screws are driven flush and securely fixed.

 · Overlay the timber sub-floor with large sheets of ply or hardboard if the floorboards are irregular or uneven.

 · Remove any doors that open into the room being treated along with skirting if required.

 · Be aware that doors, skirting and socket height may need adjusting after the Isocheck Impact Mat 200 installation.

 · Where you intend to use ceramic tiles or vinyl as a floor finish please contact us for additional advice.

 · Roll out Impact Mat 200 directly on top of the sub-floor so that the entire floor surface area is covered and that it is butted up to or turned up where it terminates at all perimeter walls.

 · In the case of a carpet finish Isocheck Impact Mat 200 will terminate at the edge of the gripper rail.

 · In the case of a finished timber floor, the skirting should be removed and replaced once the mat has been returned on top of the finished floor.

 · Bond to the sub-floor with Isocheck Impact Mat adhesive where appropriate and butt the adjoining edges followed by standard (100mm wide) building tape.

 · Also tape the turned up edges to the wall to help with installation of a finished timber floor to receive the skirting later.

 · Apply the finish floor surface on top of Impact Mat.

 · Carpets, Timber laminate panels and vinyl coverings can be placed directly over the Impact Mat 200 with an appropriate interlayer (as selected by the flooring contractor).

 · All mechanical penetrations through the Impact Mat should be avoided e.g. A finished solid timber floor would commonly be pinned to a min. 12mm plywood interlayer.

 · Isocheck Flanking Strips provide isolation of the flooring system from all vertical structures and penetrations and should be used when a solid timber floor finish is required.

 · The Flanking Strip is trapped to the wall and returned down over the finished timber floor.

 · The skirting board is then fixed to the wall securing the Flanking Strip between the skirting board and the floor.

 · After the skirting board is installed, simply trim the Flanking Strip flush with a sharp knife.

 · Upon completion ensure the Isocheck Impact Mat 200 is protected from any mechanical damage where appropriate.

 · Please observe proper lifting methods and if transporting around the site, by hand.

 · If in doubt in any area, please call Isomass prior to commencement of work.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.