6mm Isocheck ResiScreed Under Screed is an impact mat made from bonded rubber fibres (80% recycled tyres) used to reduce impact sound transmission through all types of structural concrete floors.

Under Screed Impact Mat can be used on concrete beam and block, hollow core, in-situ and all other types of concrete structural subfloors, for refurbishment, conversions or new build projects.

ResiScreed comprises a reconstituted rubber crumb layer bonded to a DPM fibreglass backing that has been designed to be placed within a masonry structural floor directly below the screed.

This isolates the screed from the structural sub floor, and provides sufficient impact absorption to place it amongst the top performing flooring systems available.

By ensuring that all the joints are taped, bridging will be eliminated which is the single greatest cause of failure of any system of this type.

Isocheck ResiScreed comes with the backing of a free indemnified design details (that incorporate Isomass products) guaranteed to pass a Part E compliant sound test.

ResiScreed is tested as a single layer product with composition that prevents water transmission which can impair acoustic performance.

Under Screed Impact Mat is manufactured in 365kg/m3 density with an excellent impact improvement performance of 25dB.

Impact Mat ResiScreed is suitable for new build, refurbishment and conversion projects.

Specification:

Thickness: 6mm

Width: 1000mm

Length: 15m

Size: 6mm x 1000mm x 15000mm

Profile: Impact Mat

Material: Bonded rubber fibres

Application: Under Screed

Density: 365kg/m3 ±5%

Compression test (BS 4098): 73J/m2

Thermal conductivity (BS 4745): 1.01 Togs

Impact Improvement: 25dB ∆ Lw

ResiScreed 6mm Under Screed Impact Mat Features:

 · Prevents water transmission.

 · Tested as a single layer product.

 · Manufactured in 365kg/m3 density.

 · Made from bonded rubber fibres.

 · Approx. 80% of recycled tyres composition.

 · Used to reduce impact sound transmission.

 · Provides sufficient impact absorption.

 · Guaranteed to pass a Part E compliant sound test.

 · Excellent impact improvement performance of 25dB.

 · Suitable for all types of structural concrete floors.

 · Suitable for refurbishment, conversions or new build projects.

 · Can be used on concrete beam and block, hollow core, in-situ.

Isocheck ResiScreed 6 Under Screed Impact Mat Installation Guidelines:

 · The floor surface should be swept free of any loose debris that may damage or bridge the system.

 · Butt joint and seal all roll edges of isocheck ResiScreed 6, 8 or 10.

 · At perimeters overlap ResiScreed 6, 8 or 10 onto a right angle flanking edge strip which should be turned up all vertical surfaces.

 · Flanking edge strips should be turned up all vertical surfaces to allow a minimum 50mm to protrude above the intended FFL of the screed.

 · Perimeter overlaps or butt joints should be sealed with a min 100mm wide Isocheck jointing tape.

 · Services that penetrate the screed should be isolated by wrapping with ResiScreed 6, 8 or 10 which again would be taped.

 · When trafficking the floor take care not to perform any unnecessary actions that may cause any of the taped joints to be forced apart.

 · Recommendations as to the use of materials, construction details and methods of installation are given in good faith and relate to typical situations.

 · However, every site has different characteristics and reliance should not be placed upon the foregoing recommendations.

 · Advice can be given as to specific applications of the products, upon request to Isomass building products.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.