6.5mm Isocheck Impact Mat 100 is an airborne and impact improvement system, a 6.5mm thick layer of Isolate R recycled rubber used over floorboards for conversion and refurbishment projects.

The Isocheck Impact Mat 100 (1200mm x 12.5m roll) system is specially designed to reduce sound transmission through timber floors and staircases.

Impact Mat is an ideal acoustic solution for floor upgrades when looking to improve sound reduction on stairs and under engineered floors.

When installed as part of a complete party floor construction the system enables a timber floor to meet the sound transmission standards of Approved Document E 2003 and amendments.

Isocheck Impact Mat 100 is a 6.5mm thick layer of recycled rubber in a recipe for excellent impact improvement and dynamic stiffness (structural memory).

Impact Mat 100 will achieve 30dB ΔLw in laboratory conditions and 19dB ΔLw with a timber laminate floor board on top.

Specification:

Thickness: 6.5mm

Width: 1200mm

Length: 12500mm

Size: 6.5mm x 1200mm x 12500mm

Profile: Acoustic Roll

Material: Isolate R (recycled rubber)

Isocheck Impact Mat 100 Features:

 · 15m2 roll coverage.

 · 1200mm x 12.5m roll.

 · Soundproofing system.

 · Used over floorboards.

 · Only 6.5mm thick layer.

 · Easy to install solution.

 · Made of Isolate R recycled rubber.

 · Airborne and impact improvement system.

 · Designed to reduce sound transmission.

 · Acoustic solution for floor upgrades.

 · Suitable for timber floors and staircases.

 · Suitable for refurbishment and conversion projects.

 · Excellent dynamic stiffness (structural memory).

 · Meet the sound transmission standards of Approved Document E 2003.

6.5mm Isocheck Impact Mat 100 Installation Guidelines:

 · Ensure the sub-floor surface is smooth, dry and free from debris and any existing floor coverings such as vinyl or carpet tiles must be removed together with any adhesive residue.

 · Secure all loose floorboards ensuring all nails and screws are driven flush and securely fixed.

 · Overlay the timber sub-floor with large sheets of ply or hardboard if the floorboards are irregular or uneven.

 · Remove any doors that open into the room being treated along with skirting if required.

 · Be aware that doors, skirting and socket height may need adjusting after the Isocheck Impact Mat 100 installation.

 · Where you intend to use ceramic tiles or vinyl as a floor finish please contact us for additional advice.

 · Roll out Impact Mat 100 directly on top of the sub-floor so that the entire floor surface area is covered and that it is butted up to or turned up where it terminates at all perimeter walls.

 · In the case of a carpet finish Isocheck Impact Mat 100 will terminate at the edge of the gripper rail.

 · In the case of a finished timber floor, the skirting should be removed and replaced once the mat has been returned on top of the finished floor.

 · Bond to the sub-floor with isocheck Impact Mat tackifier adhesive where appropriate and butt the adjoining edges followed by standard (75mm or 100mm wide) building tape.

 · Also tape the turned up edges to the wall to help with installation of a finished timber floor to receive the skirting later.

 · Finished timber floors should be isolated from the skirting using Isocheck Acoustic Flanking Band.

 · Apply the finish floor surface on top of Impact Mat.

 · Carpets, Timber laminate panels and vinyl coverings can be placed directly over the Impact Mat 100 with an appropriate interlayer (as selected by the flooring contractor).

 · All mechanical penetrations through the Impact Mat should be avoided e.g. A finished solid timber floor would commonly be pinned to a min. 12mm plywood interlayer.

 · Upon completion ensure the Isocheck Impact Mat 100 is protected from any mechanical damage where appropriate.

 · Please observe proper lifting methods and if transporting around the site, by hand.

 · If in doubt in any area, please call Isomass prior to commencement of work.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.