4-5mm Isocheck Barrier Mat 10 (10kg) is a weight-enhanced Barrier Mat system used for airborne, low-frequency damping properties in floors and walls through timber floors.

Isocheck Barrier Mat 10kg (1.2m x 2.0m) is made of high-density barium sulphate loaded thermoplastic polymer, plasticized with phthalate esters and containing mineral fillers.

Airborne Improvement System Isocheck Barrier Mat is black in colour, bitumen free, ecologically neutral and recyclable with strong environmental credentials.

The 4-5mm Isocheck Barrier Mat 10 is an ideal solution for upgrades when looking to improve airborne sound reduction with minimal increase in height and depth within floors and walls.

Isocheck Barrier Mat 10 can be laid directly over existing floorboards or draped between joists in floors or sandwiched between two sheets of plasterboard or draped within a studwork wall.

Two to three layers glued onto timber floors will dramatically reduce airborne noise penetrating the floor from below or airborne noise you are creating being transmitted from above.

Barrier Mat 10kg is suitable for conversions, refurbishments or listed buildings requiring minimal structural change.

Isocheck Barrier Mat 10kg contains a high performance material that has been acoustically tested at a UKAS certified independent test laboratory.

Tested and Rated according to: BS EN ISO 717-1:2013, BS EN ISO 10140-1:2016 and BS EN ISO 10140:2010.

Specification:

Thickness: 4-5mm

Width: 1200mm

Length: 2000mm

Size: 4-5mm x 1200mm x 2000mm

Profile: Weight-enhanced Barrier Mat

Material: Barium sulphate loaded thermoplastic polymer

Colour: Black

Weight: 24.07kg

Isocheck Barrier Mat 10 Features:

 · Bitumen free.

 · Ecologically neutral.

 · Only 4-5mm thick mat.

 · 1.2m wide x 2.0m long.

 · High performance material.

 · Airborne improvement system.

 · Ideal solution for upgrades.

 · Suitable for floors and walls.

 · Can be draped  within a studwork wall.

 · Can be draped between joists in floors.

 · Can be laid directly over existing floorboards.

 · Specially designed weight-enhanced barrier mat.

 · Containing phthalate esters and mineral fillers.

 · Recyclable with strong environmental credentials.

 · Used for airborne, low-frequency damping properties.

 · Can be sandwiched between two sheets of plasterboard.

 · Suitable for refurbishment and conversion projects.

 · Suitable for listed buildings requiring minimal structural change.

 · Made of high-density barium sulphate loaded thermoplastic polymer.

 · Acoustically tested at a UKAS certified independent test laboratory.

 · Improve airborne sound reduction with minimal increase in height and depth.

 · Tested and Rated according to BS EN ISO 10140-2:2010.

 · Tested and Rated according to BS EN ISO 10140-1:2016.

 · Tested and Rated according to BS EN ISO 717-1:2013.

Isocheck Barrier Mat 10 for Floors and Walls Installation Guidelines:

 · Barrier Mats are ideal for upgrades when looking to improve airborne sound reduction with minimal increase in height and depth within floors and walls.

 · Isocheck Barrier Mat 10 contains a high performance material that has been acoustically tested at a UKAS certified independent test laboratory.

 · Barrier Mat 10kg/m2 is tested and rated according to: BS EN ISO 717-1:2013, BS EN ISO 10140-1:2016 and BS EN ISO 10140:2010.

 · Can be laid directly over existing floorboards or draped between joists in floors.

 · Can be sandwiched between two sheets of plasterboard or draped within a studwork wall.

 · Two to three layers glued onto timber floors will dramatically reduce airborne noise penetrating the floor from below or airborne noise you are creating being transmitted from above.

 · Barrier Mats can be fixed using pins, hangers or banding.

 · Alternatively, it can be bonded using an approved polyurethane based contact adhesive or a solvent-based acrylic pressure sensitive adhesive.

 · Finished timber floors should be isolated from the skirting using Isocheck Acoustic Flanking Band.

 · Full installation instructions are available and must be used in conjunction when laying this system.

 · In timber walls the Barrier Mat can be sandwiched between two sheets of plasterboard.

 · Can also be used for roofs (see separate data sheet - Isocheck Barrier Mat 5kg).

 · If in doubt in any area, please call Isomass prior to commencement of work.

*Further information may be found in our Downloads section.

Fairly easy access to all PDF files.

Datasheet ǀ Declaration of Performance - DoP ǀ BBA Certificate ǀ Installation Guide ǀ Certificates ǀ Brochure ǀ SPEC Sheet 

*Special Product - Non returnable cancelable.