Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
100mm Unilin Close-R Fire Rated Cavity Closer, a rigid phenolic core between foil facings and stone wool wrapped in a protective red sleeve to achieve a minimum 60 minutes fire resistance.
Safe-R Close-R Cavity Closer achieves an excellent fire rating and allows for the correct placement of wall ..
100mm Unilin Safe-R Close-R Insulated Fire Rated Cavity Closer FR
Cavity Closer achieves an excess of 4 hour fire rating in a 150mm cavity
Fire Rated Cavity Closer is used around window and door openings
Safe-R Close-R is preventing cold bridging, damp penetration and condensation
Suites 100 - 150mm cavities and meets Building Regulations requirements
100mm Unilin ECO/MA 360 Floor Insulation is a bio-enhanced, superior performance PIR rigid foam insulation board suitable for underfloor heating, solid and suspended floors.
It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high p..
Unilin ECO/MA 360 Premium Floor PIR Insulation Board (Floorboard)
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
100mm Unilin ECO360 meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing floors
10mm Fermacell Firepanel is a homogeneous fibre-reinforced gypsum based dry lining fire protection board reinforced with non-flammable fibres for superior fire protection.
Firepanel A1 is a new dimension in fire protection for dry linings, an innovative development of the original Fermacell Gyps..
10mm Fermacell Firepanel Class A1 Non Combustible Fire Protection Board
Homogeneous fibre-reinforced gypsum based dry lining fire protection board
Firepanel is reinforced with non-flammable fibres for superior fire protection
Fully complies with construction building materials class A1 non-combustible
Firepanel partition system to EN 1364-1 provides 60 minutes fire rated lining
12.5mm Knauf Fire Panel Plasterboard Fire Shield is a high quality gypsum based tapered edge plasterboard with additives for fire performance that is suitable for Fire Rated partitions and any other drylining application where fire rating is crucial.
Knauf Fire Resistant Plasterboard with a Pink ..
Superior Fire Protection
Partitions and Lining Systems
Plaster Finish or for direct Decoration
Plasterboard with a Pink Paper Face
Fire-Panel can provide up to 1 Hour Fire Resistance
Siniat Weather Defence External Sheathing Board 12.5mm x 1200mm x 2400mm is a strong, moisture resistant A1 non-combustible exterior sheathing board faced with water repellent material that is compliant for structures above 18m in height.
Weather Defence™ is a revolutionary facade external sheath..
DensGlass A1 Fire Rated Sheathing Board 12.7mm is an A1 non-combustible external sheathing board that consists of a fibreglass mat with a gypsum core, designed to provide a high degree of protection from the elements in external cladding constructions.
12.7mm DensGlass Gold Sheathing Board is an ..
12.7mm Promat MONOLUX 800 (MST 800) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 800 High Performance Fire Protection Board is a tough and durable, resistant to..
Monolux 800 - providing up to 240 minutes Fire Resistance
MST-800 - 1000°C - Easy to Decorate with Paints, Wallpapers or Tiles
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
12.7mm Promat MONOLUX 500 Fire Board (MST 500) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 500 High Performance Fire Protection Board 12.7mm is a tough and dur..
Easy to Decorate with Paints, Wallpapers or Tiles
Monolux 500 - providing up to 240 minutes Fire Resistance
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
12.7mm Promat PROMATECT®-MST Fire Resistant Board is a rigid non-combustible insulation board specifically formulated without asbestos and mineral fibres used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST 12.7mm is an e..
Promat PROMATECT®-MST A1 Fire Resistant Board 12.7mm
Effective and stable fire insulation solution for demanding applications
Good rigidity properties even when exposed to high temperatures of 1000ºC
Rigid fire insulation board with up to 240 minutes fire resistance (protection)
12mm Cembrit PB Permabase (UNIPAN) Cement Board is a fibreglass-mesh reinforced, lightweight, water-resistant cement board with tapered edges, used on external applications, such as rendering, brick slips or stone cladding.
This rigid cement and aggregate based board incorporates polystyrene bead..
12mm Cembrit PB Permabase UNIPAN Cement Board A1
External applications: rendering, brick slips or stone cladding
Tapered edges to facilitate invisible butt joint installation
Reinforced board with resistance to moisture and mould growth
A1 non-combustible reinforced, water-resistant fire rated cement board
12mm Promat PROMAFOUR Fire Resistant Board 1200mm x 1200mm is a strong non-combustible calcium silicate fire resistant board formulated without inorganic fibres or formaldehyde suitable for fireplaces and wood burning stoves.
The PROMAFOUR® board has achieved A1 class, which is the highest fire r..
Application: Fireplaces and wood burning stoves
Fire Rating (Reaction to Fire): A1(Non-combustible)
Fire Protection (Resistance to Fire): 240minutes
Naturally smooth surface that can be easily decorated
Resists continuous high temperatures of up to 1000°C
12mm Promat PROMATECT®-250 is a mineral bound lightweight calcium-silicate fire protection board made with PROMAXON® technology, used for the fire protection of structural steel ‘H’ or ‘I’ shaped beams and columns and mezzanine floors.
Promat PROMATECT 250 is a 2500mm long by 1200mm wide calcium ..
12mm Promat PROMATECT 250 Fire Protection Board
A1 non-combustible low density calcium-silicate insulation board
PROMATECT®-250 is made with special PROMAXON® technology
Used for protection of steel structures and mezzanine floors
Provides up to 150 minutes fire protection to structural steelwork
136mm Promat TLFR Board (180minutes Fire Protection) is a combination of calcium silicate board bonded to Rockwool stone wool insulation core designed for semi-exposed concrete floors to provide up to 180 minutes fire protection.
TLFR Promat 1200mm x 600mm x 136mm Board is an ideal solution to th..
Promat TLFR FIRE Protection Board
Euroclass Fire Classification A1 Non-combustible
Up to 180 minutes Fire Protection
Excellent Thermal Performance
Class 0 Building Regulations Calcium-silicate Board
15mm Glasroc F FireCase Fire Protection Board British Gypsum is a highly versatile, non-combustible, Class A1 and Class 0 glass-reinforced gypsum based plasterboard used mostly as part of the FIRECASE frameless structural steel encasement system, giving up to 120 minutes fire protection and in the G..
15mm Promafour Promat Non-combustible Fire Board 2500mm x 1250mm is a rigid calcium silicate fire resistant board formulated without inorganic fibres or formaldehyde suitable for fireplaces and wood burning stoves.
The PROMAFOUR® board has achieved A1 class, which is the highest fire rating for n..
Application: Fireplaces and wood burning stoves
Fire Rating (Reaction to Fire): A1(Non-combustible)
Fire Protection (Resistance to Fire): 240minutes
Naturally smooth surface that can be easily decorated
Resists continuous high temperatures of up to 1000°C
15mm Promat PROMATECT-XW is an A1 non‑combustible and moisture resistant Fire Protection Board used for the protection of structural steel giving up to 60 minutes fire protection to structural steel columns and beams.
PROMATECT-XW is used to provide one, two, three or four sided encasements to: c..
15mm Promat PROMATECT-XW A1 Fire Protection Board
Fully tested at limiting temperatures from 300ºC to 650ºC
60 minutes fire protection to structural steel columns and beams
Thinner solution in comparison with other fire‑resistant constructions
Quick, easy to cut and install saving time and reducing installed cost
20mm Lamella Mat (45kg/m3) is manufactured from non-combustible mineral wool faced with aluminium foil used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classi..
20mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
20mm Lamella Mat (60kg/m3) is manufactured from non-combustible mineral wool faced with foil used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and f..
20mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
20mm Promat Fire Board PROMATECT L500 is a special non-combustible low density calcium silicate fire insulation board, used for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
Promat L500 PROMATECT 20mm is off white i..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
20mm Promat VERMICULUX-S is an A1 class non-combustible calcium silicate board which provides up to 240 minutes fire protection for buildings storing high value items or assets, including museums, data centres and bonded warehouses.
VERMICULUX-S is used to protect one, two, three or four sided en..
25mm Promat PROMASIL-1000L Fire Insulation Board 1000°C is a large-size, lightweight fire insulation board with very good thermal properties and thermal stability up to 1000°C, used in the fireplaces and stoves systems.
Promat PROMASIL-1000L Boards are often used in heavy industry for anode bakin..
25mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C is a lightweight fire insulation board with very good thermal properties and thermal stability up to 1050°C, used in the fireplaces and stoves construction.
Promat PROMASIL-1100 SUPER Boards are suitable for multiple uses in single layer sys..
25mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C
Fireplaces, Wood Burning Stoves, PROMAFOUR® fireplace systems
Very good thermal properties and thermal stability up to 1050°C
Extra low thermal conductivity calcium-silicate fire insulation board
Multiple uses in single layer systems for penetration seals in walls and slabs
25mm XO/UF Underfloor Heating Insulation Board Xtratherm Xtroliner is an improved performance PIR (polyisocyanurate) rigid foam floor insulation board with robust textured foil facings designed for ground supported floors, suspended floors and underfloor heating.
Xtratherm Xtroliner XO/UF is a BB..
Suitable for Underfloor Heating - UFH
High Compressive Strength >150 (kPa)
Premium PIR Insulation - Thermal Conductivity: 0.021W/mK
27.5mm (28mm) XT/TL-FR is a fire resistant insulated plasterboard made of 15mm Unilin PIR foam insulation core bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protec..
27.5mm (28mm) XT/TL-FR Fire Resistant Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
310ml Isocheck Intumescent Acoustic Fire Rated is a mastic sealing and fire stopping compound used for penetration services and linear joints and gap seals mainly in acoustic flooring systems.
Isocheck acoustic fire rated mastic sealant is used to reduce the unwanted airborne sound that is common..
310ml Isocheck Intumescent Acoustic Fire Rated Mastic Sealant
Sealing and fire stopping compound used for penetration services
Used for linear joints and gap seals mainly in acoustic flooring systems
Used to reduce the unwanted airborne sound between ceilings, floors and walls
Acoustic and Intumescent Mastic Sealant is used as an acoustic and fire seal
310ml Promat PROMAFOUR GLUE 1000 is a versatile non-combustible ready for use refractory silicate based glue which resists temperatures up to 1000 °C, used in construction of a PROMAFOUR mantelpiece and is the ideal solution for fireplaces.
PROMAFOUR GLUE-1000 bonds permanently with glass fibre, ..
Colour: White-Grey
Classification temperature 1000 °C
Hardening Between: 12 - 24 h
Fire-resistance: Non-combustible
Promat Glue-1000 is the ideal solution for fireplaces
36mm Soffit Liner Insulation Board (30mm RWA45 & 6mm Promat Masterboard) is an A1 class non-combustible soffit liner board that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using high performing, non-combustible Roc..
36mm Soffit Liner Insulation Board A1 Class Non-combustible
30mm Rockwool RWA45 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
36mm Soffit Liner is made up of 30mm Rockwool RW5 bonded to 6mm Promat Masterboard to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RW5 insulation slab faced with 6mm Promat Masterboard ..
36mm Soffit Liner Insulation Board A1 Class Non-combustible
30mm Rockwool RW5 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
3l Promat PROMAFOUR PRIMER is a versatile non-combustible priming paint based on liquid calcium silicate and small quantities of organic additives designed for walls, wood and other materials.
PROMAFOUR PRIMER bonds permanently with mineral substrates, is extremely water vapour permeable, highly ..
Colour: Milky
Classification temperature 1000 °C
Drying time: At least 12h
PROMAFOUR PRIMER bonds permanently
Excellent bonding on masonry and concrete surfaces
42mm Soffit Liner Insulated Board (30mm RWA45 & 12mm Masterboard) is a high-quality A1 class soffit liner board used to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RWA45 insulation sla..
42mm Soffit Liner Insulation Board A1 Class Non-combustible
30mm Rockwool RWA45 bonded to 12mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
50mm Rockwool Ablative Coated Batt is a special pre-coated on both sides rock wool insulation batt with an outstanding fire performance that can be installed across a variety of services and substrates.
Ablative Coated Batt 50mm x 600mm x 1200mm can be used in flexible walls, multi-service penet..
6mm CEMBLOC CemPlate A1 Board is a high performance external weather protection board used on timber frame, modular and steel frame (SFS) constructions prior to the install of a finished external facade system.
CemPlate is a unique building board with exceptional dimensional stability of (..
6mm CemPlate Multi-Purpose External Sheathing Board Class A1 Fire Rated
Designed for modular builds, external sheathing and as a render carrier board
CemPlate high performance board for both indoor and outdoor applications
Highly resistant to impact, damp, effects of sunlight, moisture and water
Provides strong and durable substrate for rendering and cladding systems
6mm Kemwell WeatherKem Fibre Cement Board is an A1 class calcium silicate external sheathing board, combining weather, moisture and fire resistance properties with high impact strength and sound insulation.
The WeatherKem Sheets are BBA certified, category A weather-proof rated building boards su..
6mm Kemwell WeatherKem Fibre Cement Class A1 Board
External sheathing board for interior and exterior applications
WeatherKem is combining weather, moisture and fire resistance properties
High impact strength and sound insulation between 26dB and 44dB
Internal lining on partitions, claddings, flooring, ceilings and sheathing
6mm Magply Fire Rated Render Carrier Board is an A1 class non-combustible fire, moisture and impact resistant render board which is manufactured from magnesium silicate coated with magnesium oxide to provide fire safety, durability, integrity and strength.
Magply 2400mm x 1200mm x 6mm is designed..
6mm Magply Fire Rated Render Carrier Board
Fire, moisture and impact resistant board
Designed to accept direct render applications
Provides fire safety, durability, integrity and strength
Fire-safe alternative to regular plywood, OSB or wood
6mm Masterboard Promat Fire Protection Board is a versatile, fire and moisture resistant reinforced calcium silicate class 0 building board formulated without inorganic fibres, providing up to 30 minutes fire resistance in internal and semi exposed applications.
Multi-purpose MASTERBOARD 2440mm x..
6mm Glasroc F MultiBoard British Gypsum (GRG) is a highly versatile, non-combustible, Class A1 and Class 0 glass-reinforced gypsum based impact resistant fire protection board that is suitable for constructing all forms of ceilings and partitions, including curved wall applications.
British Gypsu..
6mm Promat PROMATECT®-H Calcium Silicate Fire Protection Board is a non-combustible matrix engineered mineral fireboard reinforced with selected fibres and fillers that does not contain formaldehyde.
Fire Board Promatect-H can be used as a fire protection of steel and concrete structures, ceiling..
6mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
6mm Promat Supalux is an ultimate class A1 non-combustible reinforced calcium silicate fire protection board providing up to 240 minutes fire rating and improved moisture resistance.
Promat Supalux Fire Protection Board can be used in steel and timber frame, mezzanine floors, shaft-wall and doors..
6mm RCM Multipurpose Fire Rated Fibre Cement Board is an A1 non-combustible cellulose fibre cement board that provides outstanding strength, weathering and acoustic properties making it an excellent option for buildings over 18m.
Multipurpose RCM boards are suitable for the following construction..
External Cladding - Flooring and Ceilings
BBA Approved - High Impact Resistance
Fire Rated to EN 13501-1 Class A1 Non-Combustible
Cellulose Fibre-Cement Superflex Building Board
RCM Multipurpose can be used as a Tile Backer Board
6mm RCM Siltech Fire Rated Calcium Silicate Board is a non-combustible flexible calcium silicate fibre cement board which provides 60 to 120 minutes fire rating and superior workability due to a unique fibre reinforced formulation.
RCM Siltech 6mm can be used in an extensive range of applications..
6mm RCM Y-Wall Fibre Cement Sheathing Board is an A1 fire rated flexible calcium-silicate fibre cement based sheathing board designed for use in ceilings, partitions, exterior cladding and as a sheathing board for buildings over 18m in height.
Benx RCM Y-Wall Fire Rated Sheathing Board 2400mm x 1..
Fire rated, Class A1 Non-combustible
RCM Y-Wall Fibre Cement Building Board
BS EN 13501-1 Class A1 to EN 13501-1
For buildings over 18meters in height
Flexible calcium-silicate cement based sheathing board
The 6x1200x2400mm Kemwell FireKem FP-900 is a strong class A1 calcium silicate fire protection board used for multi-purpose applications in commercial and industrial projects.
This fire rated board is a perfect solution for internal partitions, external walls, roofs, floors and ceilings, and is p..
6mm Kemwell FireKem FP-900 Fire Protection Board
Calcium Silicate A1 Non-combustible Fire Rated Board
Approved for up to 240 minutes fire resistance (BS 476: Part 22)
Internal partitions, external walls, roof, floor, ceiling and dry wall
Very good acoustic reduction performance of between 26-49dB
81mm Promat TL Bevelled Edge Board is a fire rated calcium silicate board bonded to Kingspan phenolic insulation core designed to be fixed to the underside of concrete floors to achieve specific U-values required by the project design and Building Regulations.
TL Promat 2397mm x 1197mm x 81mm Boa..
Promat TL Board Bevelled Edge
Non-combustible CFC’s and HCFC’s Free
Euroclass Fire Classification A1
High-quality moisture resistant board
Class 0 Building Regulations Calcium-silicate Board
Windstopper Basic Cembrit Cement External Sheathing Board 9mm x 1200mm x 2400mm is a special type of breathable fibre-cement non-combustible building board that features a windproof membrane for exterior walls.
The board consists of grey cement and limestone filler, reinforced with a specially se..
9mm Cembrit Windstopper Extreme Facade Board (1200mm x 2400mm - 2.88m²) is an external sheathing fibre-cement based building board with a 60/60 fire rating (class A2-s1), an ideal solution for exterior walls used as a temporary cladding.
Windstopper Extreme by Cembrit is a non-combustible, vapour..
4.5mm Cembrit Windstopper Extreme (1200mm x 2400mm - 2.88m²) is a guaranteed and tested fire and weather resistant breathable external sheathing board with A2 fire protection class that features a windproof membrane for exterior walls.
Windstopper Extreme by Cembrit is a non-combustible, vapour p..
Everbuild Fire Rated B2 Expanding Foam Gun Grade (750ml) is a unique quick-setting one-part polyurethane fire rated expanding foam used for fixing, filling and insulating with fire resistant properties for up to 2 hours.
Gun Grade Fire B2 Foam EVERBUILD® expands on application 1.5 - 2 times its o..
6mm Kemwell MultiKem MP-1000® Calcium Silicate Board is an A1 class non-combustible multi-purpose fire resistant building board used for interior and semi-exposed applications.
Kemwell MultiKem MP-1000 is a fire, moisture and impact resistant board that provides up to 120 minutes fire resistance ..
6mm Kemwell MultiKem MP-1000 Fire Protection Board
Calcium Silicate A1 Non-combustible Fire Rated Board
Building board used for interior and semi-exposed applications
Moisture and impact resistant non-combustible fire board
MultiKem MP-1000 provides up to 120 minutes fire resistance
Novia FR Breather Membrane is a high-quality Class B-s1,d0 Fire Rated construction wrap which is fully approved for both roof and wall applications in pitched cold and warm roofs, and insulated wall applications including those above 18m in height.
FR Breather Waterproofing Wrap is lightweight an..
B‐s1,d0 Fire class breather membrane
Dual approved for both roof and wall applications
W1 water resistance - good breathability - lightweight
CE compliant to EN 13859‐1 (roofs) and EN 13859‐2 (walls)
Pitched cold and warm roofs and insulated wall applications
1.5kg Promat PROMAFOUR-HT JOINT-FILLER is a greyish-yellow, ready to use filling and levelling compound made of refractory boards, mix of clay and an inorganic binder for filling and levelling out PROMAFOUR construction boards for mantelpieces.
Due to its consistency, PROMAFOUR-HT JOINT-FILLER ca..
Colour - Beige
Classification temperature 1000 °C
Density 1700 kg/m3
Processing temperature > 10 °C
Excellent bonding on masonry and concrete surfaces
4mm Tenmat FF102/25 Fire Barrier is a high expansion intumescent seal used as a fire protection barrier designed to reinstate fire resistance performance within external wall cavities that require permanent ventilation.
In the event of a fire the FF102/25 Tenmat will expand to close the external ..
Tenmat FF102/25 Ventilated Cavity Fire Barrier for 25mm cavities
Provided in strips of 1000mm long by 35mm wide and 4mm thick
Fire Rated for up to 60 minutes for both integrity and insulation
High expansion intumescent seal used as a fire protection barrier
Lightweight - designed to be easily and quickly installed on site
10mm Glasroc F MultiBoard British Gypsum (GRG) is a highly versatile, non-combustible, Class A1 and Class 0 glass-reinforced gypsum based impact resistant fire protection board that is suitable for constructing all forms of ceilings and partitions, including curved wall applications.
British Gyps..
125mm Fire Rated Cavity Closer Close-R is a combination of a rigid phenolic core between foil facings and stone wool wrapped in a protective red sleeve to achieve a minimum 60 minutes fire resistance.
Safe-R Close-R Cavity Closer achieves an excellent fire rating and allows for the correct placem..
125mm Unilin Safe-R Close-R Insulated Fire Rated Cavity Closer FR
Cavity Closer achieves an excess of 4 hour fire rating in a 150mm cavity
Fire Rated Cavity Closer is used around window and door openings
Safe-R Close-R is preventing cold bridging, damp penetration and condensation
Suites 100 - 150mm cavities and meets Building Regulations requirements
125mm Unilin ECO360 Floor Board, a rigid foam bio-enhanced PIR core with textured robust low emissivity foil facings, used for underfloor heating, solid and suspended floors.
It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high ..
125mm Unilin ECO 360 Premium Floor PIR Insulation Board (Floorboard)
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
Unilin ECO360 meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing floors
12.5mm Firepanel Fermacell is a fibre-reinforced gypsum-bound A1 class fire protection dry lining board reinforced with non-flammable fibres for superior fire protection.
Firepanel A1 is a new dimension in fire protection for dry linings, an innovative development of the original Fermacell Gypsu..
12.5mm Fermacell Firepanel Class A1 Non Combustible Fire Protection Board
Homogeneous fibre-reinforced gypsum based dry lining fire protection board
Firepanel is reinforced with non-flammable fibres for superior fire protection
Fully complies with construction building materials class A1 non-combustible
Firepanel partition system to EN 1364-1 provides 60 minutes fire rated lining
12mm Promat PROMAFOUR Fire Board 2400mm x 1200mm is a highly-durable non-combustible cement bonded calcium silicate fire resistant board formulated without inorganic fibres or formaldehyde used for fireplaces and wood burning stoves.
The PROMAFOUR® board has achieved A1 class, which is the highes..
Application: Fireplaces and wood burning stoves
Fire Rating (Reaction to Fire): A1(Non-combustible)
Fire Protection (Resistance to Fire): 240minutes
Naturally smooth surface that can be easily decorated
Resists continuous high temperatures of up to 1000°C
15mm Knauf Fire Panel Plasterboard Fire Shield is a gypsum based tapered edge plasterboard with special additives for fire performance that is suitable for Fire Rated partitions and any other dry lining applications where fire rating is crucial.
Knauf Fire Resistant Plasterboard with a Pink Paper..
Superior Fire Protection
Partitions and Lining Systems
Plaster Finish or for direct Decoration
Plasterboard with a Pink Paper Face
Fire-Panel can provide up to 1 Hour Fire Resistance
15mm Promat PROMAFOUR Fire Resistant Board is a 1250mm x 1250mm, strong and highly-durable, non-combustible calcium silicate fire board formulated without inorganic fibres or formaldehyde suitable for fireplaces and wood burning stoves.
The PROMAFOUR® board has achieved A1 class, which is the hig..
Application: Fireplaces and wood burning stoves
Fire Rating (Reaction to Fire): A1(Non-combustible)
Fire Protection (Resistance to Fire): 240minutes
Naturally smooth surface that can be easily decorated
Resists continuous high temperatures of up to 1000°C
15mm Promat PROMATECT 250 Fire Protection Board is an A1 class non-combustible low density calcium-silicate fire insulation board made with PROMAXON® technology, used for protection of steel structures and mezzanine floors.
Promat PROMATECT 250 is a 15mm thick, 2500mm long by 1200mm wide calcium ..
15mm Promat PROMATECT 250 Fire Protection Board
A1 non-combustible low density calcium-silicate insulation board
PROMATECT®-250 is made with special PROMAXON® technology
Used for protection of steel structures and mezzanine floors
Provides up to 150 minutes fire protection to structural steelwork
166mm Promat TLFR Board is a combination of class 0 fire rated calcium silicate board bonded to Rockwool stone wool insulation core that is designed for semi-exposed concrete floors to provide up to 180 minutes fire protection and excellent thermal performance.
TLFR Promat 1200mm x 600mm x 166mm ..
Promat TLFR FIRE Protection Board
Euroclass Fire Classification A1 Non-combustible
Up to 180 minutes Fire Protection
Excellent Thermal Performance
Class 0 Building Regulations Calcium-silicate Board
16mm Cembrit UNIPAN PB Permabase Cement Board is an A1 non-combustible reinforced, water-resistant fire rated cement board with tapered edges, used on external applications, such as rendering, brick slips or stone cladding.
This rigid cement and aggregate based board incorporates polystyrene bead..
16mm Cembrit PB Permabase UNIPAN Cement Board A1
External applications: rendering, brick slips or stone cladding
Tapered edges to facilitate invisible butt joint installation
Reinforced board with resistance to moisture and mould growth
A1 non-combustible reinforced, water-resistant fire rated cement board
19.1mm Promat MONOLUX 500 Fire Protection Board (MST 500) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 500 High Performance Fire Board 19.1mm is a tough and dur..
Easy to Decorate with Paints, Wallpapers or Tiles
Monolux 500 - providing up to 240 minutes Fire Resistance
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
20mm Glasroc F FireCase Fire Protection Board British Gypsum is a highly versatile, non-combustible, Class A1 and Class 0 glass-reinforced gypsum based plasterboard used mostly as part of the FIRECASE frameless structural steel encasement system, giving up to 120 minutes fire protection and in the G..
20mm MONOLUX 800 Promat Fire Board (MST 800) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 800 High Performance Board 20mm is a tough and durable, resistant to i..
Monolux 800 - providing up to 240 minutes Fire Resistance
MST-800 - 1000°C - Easy to Decorate with Paints, Wallpapers or Tiles
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
20mm Promat PROMATECT®-MST Fire Board is a structural calcium silicate rigid insulation board specifically formulated without asbestos used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST 20mm is an effective and stable f..
Promat PROMATECT®-MST A1 Fire Resistant Board 20mm
Stable fire insulation solution for demanding applications
High strength even when exposed to high temperature of 1000ºC
Fire insulation board with up to 240min fire resistance (protection)
Insulation in ovens and dryers, Heat shield, Structural thermal break
25mm Foil Faced Mineral Wool (45kg/m3) Roll is an A1 class non-combustible mineral wool faced with aluminium foil used for heating and ventilation pipes, ductwork and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classifi..
25mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
25mm Foil Faced Mineral Wool (60kg/m3) Roll is an A1 class non-combustible mineral wool faced with foil used for heating and ventilation pipes, ductwork and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fir..
25mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
25mm VERMICULUX®-S Calcium Silicate Board is a flexible fire protection board that provides up to 240 minutes fire protection for buildings storing high value items or assets, including museums, data centres and bonded warehouses.
VERMICULUX-S is used to protect one, two, three or four sided enca..
30mm Promat PROMASIL®-1000L 2500mm x 1200mm is a lightweight calcium-silicate fire insulating board with very good thermal properties and thermal stability up to 1000°C, used in the fireplaces and stoves constructions.
Promat PROMASIL-1000L Boards are often used in heavy industry for anode baking..
Promat PROMASIL®-1100 SUPER 30mm x 1200mm x 2500mm is a calcium-silicate fire insulating board with very good thermal properties and thermal stability up to 1050°C, used in the fireplaces and stoves constructions.
30mm PROMASIL-1100 SUPER Boards are suitable for multiple uses in single layer syst..
30mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C
Fireplaces, Wood Burning Stoves, PROMAFOUR® fireplace systems
Very good thermal properties and thermal stability up to 1050°C
Extra low thermal conductivity calcium-silicate fire insulation board
Multiple uses in single layer systems for penetration seals in walls and slabs
30mm Promat PROMATECT L500 Fire Protection Board is a versatile non-combustible low density calcium silicate fire insulation board, used for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
Promat L500 PROMATECT 30mm i..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
30mm XO/UF Underfloor Heating Insulation Board Xtratherm Xtroliner is an improved performance PIR (polyisocyanurate) rigid foam floor insulation board with robust textured foil facings designed for ground supported floors, suspended floors and underfloor heating.
Xtratherm Xtroliner XO/UF is a BB..
Suitable for Underfloor Heating - UFH
High Compressive Strength >150 (kPa)
Premium PIR Insulation - Thermal Conductivity: 0.021W/mK
32.5mm (33mm) XT/TL-FR Fire Resistant Insulated Plasterboard is made of 20mm Unilin PIR foam insulation core bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protecti..
32.5mm (20mm) XT/TL-FR Fire Resistant Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
Cembrit Windstopper Extreme 4.5mm x 1200mm x 2700mm is a breathable fibre-cement external sheathing board with a 60/60 fire rating and A2 fire protection class, dust-free easy installation and is ideal as a temporary cladding.
Windstopper Extreme by Cembrit is a non-combustible, vapour permeable ..
56mm High Impact Soffit Liner Board for Concrete Soffits (RW5 and Masterboard) is used to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RW5 insulation slab faced with 6mm Promat Masterbo..
56mm Soffit Liner Insulation Board A1 Class Non-combustible
50mm Rockwool RW5 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
56mm Soffit Liner Board A1 (50mm RWA45 and 6mm Masterboard) is a non-combustible class A1 soffit liner insulation panel that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using high performing, non-combustible Rockwo..
56mm Soffit Liner Insulation Board A1 Class Non-combustible
50mm Rockwool RWA45 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
62mm Soffit Liner Board (50mm RWA45 & 12mm Masterboard) is a superior performance A1 class soffit liner insulated panel that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RWA45 insulati..
62mm Soffit Liner Insulation Board A1 Class Non-combustible
50mm Rockwool RWA45 bonded to 12mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
8mm PROMATECT-H Promat Fireboard is a calcium silicate fire protection board, a non-combustible matrix engineered mineral board reinforced with selected fibres and fillers that does not contain formaldehyde.
Fire Board Promatect-H 8mm can be used as a fire protection of steel and concrete structu..
8mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
8mm Kemwell WeatherKem External Sheathing Board is a calcium silicate class A1 fibre cement board, combining weather, moisture and fire resistance properties with high impact strength and sound insulation.
The WeatherKem Sheets are BBA certified, category A weather-proof rated building boards sui..
8mm Kemwell WeatherKem Fibre Cement Class A1 Board
External sheathing board for interior and exterior applications
WeatherKem is combining weather, moisture and fire resistance properties
High impact strength and sound insulation between 26dB and 44dB
Internal lining on partitions, claddings, flooring, ceilings and sheathing
91mm Promat TL Bevelled Edge Board is a special insulated fire board designed to be fixed to the underside of concrete floors to achieve specific U-values required by the project design and Building Regulations.
TL Promat 2397mm x 1197mm x 91mm Board is an excellent solution to the increasing req..
Promat TL Board Bevelled Edge
Non-combustible CFC’s and HCFC’s Free
Euroclass Fire Classification A1
High-quality moisture resistant board
Class 0 Building Regulations Calcium-silicate Board
9mm Cembloc CemPlate is an ultimate fibre cement board used as an external sheathing on timber frame, modular and steel frame (SFS) constructions prior to the install of a render and external facade system.
CemPlate is a unique building board with exceptional dimensional stability of (..
9mm CemPlate Multi-Purpose External Sheathing Board Class A1 Fire Rated
Designed for modular builds, external sheathing and as a render carrier board
CemPlate high performance board for both indoor and outdoor applications
Highly resistant to impact, damp, effects of sunlight, moisture and water
Provides strong and durable substrate for rendering and cladding systems
9mm Kemwell FireKem FP-900 is an A1 non-combustible calcium silicate fire protection building board used for multi-purpose applications in commercial and industrial projects.
This fire rated board is a perfect solution for internal partitions, external walls, roofs, floors and ceilings, and is pa..
9mm Kemwell FireKem FP-900 Fire Protection Board
Calcium Silicate A1 Non-combustible Fire Rated Board
Approved for up to 240 minutes fire resistance (BS 476: Part 22)
Internal partitions, external walls, roof, floor, ceiling and dry wall
Very good acoustic reduction performance of between 26-49dB
The 9mm Kemwell MultiKem MP-1000 Calcium Silicate Board is a multi-purpose A1 class non-combustible fire resistant building board used for interior and semi-exposed applications.
Kemwell MultiKem MP-1000 is a fire, moisture and impact resistant board that provides up to 120 minutes fire resistanc..
9mm Kemwell MultiKem MP-1000 Fire Protection Board
Calcium Silicate A1 Non-combustible Fire Rated Board 9mm
Building board used for interior and semi-exposed applications
Moisture and impact resistant non-combustible fire board
MultiKem MP-1000 provides up to 120 minutes fire resistance
9mm Masterboard Promat Fire Protection Board is a versatile, fire and moisture resistant reinforced calcium silicate class 0 building board formulated without inorganic fibres, providing up to 30 minutes fire resistance in internal and semi exposed applications.
Multi-purpose MASTERBOARD 2440mm x..
9mm Promat Supalux A1 Fire Rated is a high-performance calcium silicate fire protection board with up to 240 minutes fire rating used in steel and timber frame, mezzanine floors, shaft-wall and doors installations.
SUPALUX 9mm x 2440mm x 1220mm is a strong, lightweight reinforced with selected fi..
9mm RCM Multipurpose Cellulose Fibre Cement Board A1 is a strong fire rated cellulose fibre-cement building board that offers outstanding strength, weathering and acoustic properties making it an excellent option for buildings over 18m in height.
Multipurpose boards are suitable for the following..
External Cladding - Flooring and Ceilings
BBA Approved - High Impact Resistance
Fire Rated to EN 13501-1 Class A1 Non-Combustible
Cellulose Fibre-Cement Superflex Building Board
RCM Multipurpose can be used as a Tile Backer Board
9mm RCM Siltech Fire Rated Flexible Board is a non-combustible calcium silicate building board which provides from 60 to 120 minutes fire rating and superior workability due to a unique fibre reinforced formulation.
RCM Siltech 9mm can be used in an extensive range of applications from fire rated..
9mm RCM Y-Wall Fire Rated Sheathing Board is an A1 non-combustible flexible calcium-silicate cement based sheathing board designed for use in ceilings, partitions, exterior cladding and as a sheathing board for buildings over 18meters in height.
RCM Y-WALL High Performance Board 9mm is a BBA cert..
Fire rated, Class A1 Non-combustible
RCM Y-Wall Fibre Cement Building Board
BS EN 13501-1 Class A1 to EN 13501-1
For buildings over 18meters in height
Flexible calcium-silicate cement based sheathing board
9mm Magply Fire Rated Render Carrier Board is an A1 class non-combustible render carrier board which is manufactured from magnesium silicate coated with magnesium oxide to provide fire safety, durability, integrity and strength.
Magply 2400mm x 1200mm x 9mm is designed to accept direct render app..
9mm Magply Fire Rated Render Carrier Board
Fire, moisture and impact resistant board
Designed to accept direct render applications
Provides fire safety, durability, integrity and strength
Fire-safe alternative to regular plywood, OSB or wood
9mm Cembrit Windstopper Basic External Sheathing Board (1200mm x 2700mm - 3.24m²) is a durable, moisture and mould resistant fibre-cement non-combustible board that features a windproof membrane for exterior walls.
The board consists of grey cement and limestone filler, reinforced with a speciall..
Cembrit Windstopper Extreme 9mm x 1200mm x 2700mm is a lightweight breathable fibre-cement external sheathing board with a 60/60 fire rating and dust-free easy installation and is ideal as a temporary cladding for exterior walls.
Windstopper Extreme by Cembrit is a non-combustible, vapour permeab..
60mm Rockwool Ablative Coated Batt FIREPRO is a strong and durable pre-coated on both sides stone wool fire insulation batt with an outstanding fire performance that can be installed across a variety of services and substrates.
Rockwool Ablative Coated Batt fire resistant insulation offering up t..
6mm Tenmat FF102/50 Ventilated Cavity Fire Barrier is an ultimate fire protection barrier designed to reinstate fire resistance performance within external wall cavities that require permanent ventilation in non-fire conditions.
In the event of a fire the FF102/50 Tenmat will expand to close the ..
Tenmat FF102/50 Ventilated Cavity Fire Barrier for 50mm cavities
Provided in strips of 1000mm long by 75mm wide and 6mm thick
Fire Rated for up to 120 minutes for both integrity and insulation
High expansion intumescent seal used as a fire protection barrier
Lightweight - designed to be easily and quickly installed on site
12.5mm Siniat Weather Defence™ (A1 Non-combustible) 3000mm x 1200mm is an External Sheathing Board used for external sheathing applications in steel or timber frame construction with rainscreen, insulated render, brick or block facade systems.
Weather Defence Siniat is a revolutionary facade exte..
12.5mm Siniat GTEC Weather Defence™
Siniat Façade Board Class ‘0’ to UK Building Regulations
Fire classification: A1 Non-combustible (Fire Rated Board)
3000mm x 1200mm x 12.5mm External Sheathing Board
Strong, compliant for structures above 18m in height
106mm Promat TL Bevelled Edge Board is a fire rated calcium silicate board bonded to Kingspan insulation core designed to be fixed to the underside of concrete floors to achieve specific U-values required by the Building Regulations.
TL Promat 2397mm x 1197mm x 106mm Board is an excellent solutio..
Promat TL Board Bevelled Edge
Non-combustible CFC’s and HCFC’s Free
Euroclass Fire Classification A1
High-quality moisture resistant board
Class 0 Building Regulations Calcium-silicate Board
PROMATECT–H Promat 10mm is a cement bonded calcium silicate based non-combustible matrix engineered mineral insulation board reinforced with selected fibres and fillers that does not contain formaldehyde matrix.
10mm Fire Board Promatect-H can be used as a fire protection of steel and concrete st..
10mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
12.5mm Glasroc F MultiBoard British Gypsum (GRG) is a highly versatile, non-combustible, Class A1 and Class 0 glass-reinforced gypsum based impact resistant fire protection board that is suitable for constructing all forms of ceilings and partitions, including curved wall applications.
British Gy..
Magply Fire Rated A1 Render Carrier Board 12mm is a technically advanced, non-combustible render carrier board which is manufactured from magnesium silicate coated with magnesium oxide to provide fire safety, durability, integrity and strength.
12mm x 1200mm x 2400mm Magply Board is designed to a..
12mm Magply Fire Rated Render Carrier Board
Fire, moisture and impact resistant board
Designed to accept direct render applications
Provides fire safety, durability, integrity and strength
Fire-safe alternative to regular plywood, OSB or wood
12mm Kemwell FireKem FP-900 is a calcium silicate fire protection board that provides superior fire resistance performance for commercial and industrial building projects.
This fire rated board is a perfect solution for internal partitions, external walls, roofs, floors and ceilings, and is parti..
12mm Kemwell FireKem FP-900 Fire Protection Board
Calcium Silicate A1 Non-combustible Fire Rated Board
Approved for up to 240 minutes fire resistance (BS 476: Part 22)
Internal partitions, external walls, roof, floor, ceiling and dry wall
Very good acoustic reduction performance of between 26-49dB
12mm Kemwell MultiKem MP-1000 Calcium Silicate Board is a fire resistant A1 class non-combustible multi-purpose building board used for interior and semi-exposed applications.
Kemwell MultiKem MP-1000 is a fire, moisture and impact resistant board that provides up to 120 minutes fire resistance a..
12mm Kemwell MultiKem MP-1000 Fire Protection Board
Calcium Silicate A1 Non-combustible Fire Rated Board 12mm
Building board used for interior and semi-exposed applications
Moisture and impact resistant non-combustible fire board
MultiKem MP-1000 provides up to 120 minutes fire resistance
12mm Masterboard Promat Fire Protection Board is a versatile, fire and moisture resistant reinforced calcium silicate class 0 building board formulated without inorganic fibres, providing up to 30 minutes fire resistance in internal and semi exposed applications.
Multi-purpose MASTERBOARD 2440mm ..
12mm Cemplate Ultimate Render Carrier Board is a superior building board used as an external sheathing on timber frame, modular and steel frame (SFS) constructions prior to the install of a render and external facade system.
CemPlate is a unique building board with exceptional dimensional stabili..
12mm CemPlate Multi-Purpose External Sheathing Board Class A1 Fire Rated
Designed for modular builds, external sheathing and as a render carrier board
CemPlate high performance board for both indoor and outdoor applications
Highly resistant to impact, damp, effects of sunlight, moisture and water
Provides strong and durable substrate for rendering and cladding systems
12mm Promat PROMAFOUR Non-combustible Board 2500mm x 1250mm is a non-combustible cement bonded calcium silicate board formulated without inorganic fibres or formaldehyde suitable for fireplaces and wood burning stoves.
The PROMAFOUR® board has achieved A1 class, which is the highest fire rating ..
Application: Fireplaces and wood burning stoves
Fire Rating (Reaction to Fire): A1(Non-combustible)
Fire Protection (Resistance to Fire): 240minutes
Naturally smooth surface that can be easily decorated
Resists continuous high temperatures of up to 1000°C
12mm Promat Supalux A1 Fire Rated is an original fire protection board Class A1 with up to 240 minutes fire rating and improved moisture resistance that can be used in steel and timber frame, mezzanine floors, shaft-wall and doors installations.
SUPALUX 12mm is a strong, lightweight reinforced wi..
RCM Multipurpose Class A1 Fire Rated Cement Board 12mm is an A1 non-combustible cellulose fibre-cement building board that offers outstanding strength, weathering and acoustic properties making it an excellent option for buildings over 18m.
12mm Multipurpose boards are suitable for the following ..
Coloured Render Systems - EWI
BBA Approved - High Impact Resistance
Fire Rated to EN 13501-1 Class A1 Non-Combustible
Render Carrier Board - Superflex Building Board
RCM Multipurpose can be used as a Tile Backer Board
12mm RCM Siltech Fire Rated Non-combustible Board is a flexible calcium silicate building board which provides from 60 to 120 minutes fire rating and superior workability due to a unique fibre reinforced formulation.
RCM Siltech 12mm can be used in an extensive range of applications from fire rat..
12mm RCM Y-Wall Calcium Silicate Cement Sheathing Building Board A1 is a fire rated flexible cement based sheathing board designed for use in ceilings, partitions, exterior cladding and as a sheathing board for buildings over 18m in height.
RCM Y-WALL Fire Rated Sheathing Board 12mm is a BBA cert..
Fire rated, Class A1 Non-combustible
RCM Y-Wall Fibre Cement Building Board
BS EN 13501-1 Class A1 to EN 13501-1
For buildings over 18meters in height
Flexible calcium-silicate cement based sheathing board
150x200x1200mm Unilin Safe-R Close-R Fire Rated Cavity Closer is used for closing the cavities around window and door openings to achieve a minimum 60 minutes fire resistance.
Safe-R Close-R Cavity Closer achieves an excellent fire rating and allows for the correct placement of wall ties to meet ..
150mm Unilin Safe-R Close-R Insulated Fire Rated Cavity Closer FR
Cavity Closer achieves an excess of 4 hour fire rating in a 150mm cavity
Fire Rated Cavity Closer is used around window and door openings
Safe-R Close-R is preventing cold bridging, damp penetration and condensation
Suites 100 - 150mm cavities and meets Building Regulations requirements
150mm ECO360 MA (Floorboard) Unilin, a superior performance bio-enhanced PIR rigid foam thermal insulation board suitable for underfloor heating, solid and suspended floors.
It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high p..
150mm Unilin ECO 360 Premium Floor PIR Insulation Board (Floorboard)
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
Unilin ECO360 meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing floors
15mm Fermacell Firepanel is used in internal applications for structural fire protection in the wall and ceiling area, an A1 class non-combustible fire protection board.
Firepanel A1 is a new dimension in fire protection for dry linings, an innovative development of the original Fermacell Gypsum..
15mm Fermacell Firepanel Class A1 Non Combustible Fire Protection Board
Homogeneous fibre-reinforced gypsum based dry lining fire protection board
Firepanel is reinforced with non-flammable fibres for superior fire protection
Fully complies with construction building materials class A1 non-combustible
Firepanel partition system to EN 1364-1 provides 60 minutes fire rated lining