Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Acoustic wall insulation, so called sound insulation, helps reduce sound transfer through both internal and external walls in residential and commercial properties, in order to enrich modern living. Acoustic product straightforwardly absorbs sound waves and reduces vibration due to its density. Because of that, it promotes comfort and privacy, protecting people from ‘outside-to-inside’ noise such as traffic, and ‘inside-to-inside’ noise from neighbouring dwellings. The design of acoustic insulation allows sound waves to be absorbed and prevents noise reverberation off other surfaces. Sound insulation is especially designed to reduce the number of decibels (dB). The first step in the soundproofing installation process will be to add mass to the walls. Second would be minimising the circulation of sound vibration. The most effective soundproofing solutions don't just add more of the same mass, they add mass which is comprised of different materials. Acoustic insulation is often thick, very dense material placed between the wall, plasterboard, partition, ceiling or floor. There are many ways to reduce acoustic levels by using the appropriate materials such as:
The installation of those materials should result in the reduction of decibels (dB) or absorption of sound. The best choice will depend on the desirable noise minimisation, a level which is normally indicated in the form of a dB rating. It’s also worth keeping in mind that soundproofing materials will only be as strong as their weakest point.
TYPES OF NOISE
Airborne and Impact are the main types of noise.
Airborne noise is quite simply noise transmitted through the air. It might be generated by everything from a television, home appliances, music to a barking dog. The production of airborne and structural sounds is often connected, with one causing the other.
Impact noise is vibration such as footsteps, scraping of furniture or doors banging. To prevent sound vibrations traveling through buildings, the vibration needs to be dampened to stop it from travelling through. The most effective way to stop sound vibration energy from traveling through is to decouple the structure and then add mass. Other options include the installation of floating floors and acoustic ceiling systems.
WHAT IS SOUNDPROOFING?
Soundproofing is a method for the reduction of sound pressure in relation to a particular sound source and receptor. It may also be referred to as decibel reduction. Soundproofing materials enable the minimisation of sound in the following ways:
Blocking airborne noise through the addition of mass to a structure
Separating the impact noise between structures
Absorbing sound
UK NOISE LAWS AND REGULATIONS
The soundproofing requirements for new homes and conversions are set out in part E (Resistance to Sound) of the UK Building Regulations. This covers the division of walls and floors. It will be necessary to install a range of acoustic products for compliance with part E of the regulations. The regulations specifically state that internal airborne sound resistance inside any dwelling must be a minimum of 40dB. Impact sounds must also be limited to 62dB for set floors and stairs in new builds as well as 64dB in conversion projects. The regulations specify the need for there to be some type of acoustic insulation between the flooring joists. The fitting of such insulation will result in the increase of mass and the minimisation of airborne sound. The ceiling should also be boarded with two layers of acoustic plasterboard. Acoustic underlay mats will be sufficient for the soundproofing of floors complete with sub-flooring. An acoustic underlay may be added to ensure compliance with the soundproofing standards. Blocks with a density of at least 7 kilonewtons should be used for the effective minimisation of flanking noise and to ensure compliance with UK Building Regulations.
HOW TO SOUNDPROOF STUD WALL?
The first key step when soundproofing a stud wall will be to carry out a check for any gaps or weak points. These can be filled with acoustic sealant for improved security. The process may then continue with the improvement of walling mass and the addition of acoustic insulation between the timber battens. It is advisable to use a combination of materials for the limitation of noise at different frequencies. Alternative methods for soundproofing walls include the installation of thin sound panels and complete acoustic wall systems. Soundproofing panels allow for the effective minimisation of sound without the need to sacrifice any interior space. However, a combination of materials should be used in instances requiring a high degree of soundproofing.
NOISY NEIGHBOURS
Noise disturbance is by far the most common anti-social behavior reported to the police, local authorities and housing associations. If your life is made a misery by rowdy neighbours who regularly throw noisy parties or play loud music throughout the day and night there are now a range of measures you can use to silence their inconsiderate and selfish behavior once and for all. Neighbours who make too much noise can be fined up to £5,000 or have their music systems confiscated. For most disturbances, though, such as barking dogs, loud music or DIY activities, the first step is to talk to the person responsible for the noise and point out the problem. People can be blissfully unaware they are disturbing you especially if you have poor sound insulation.
TYPES OF ACOUSTIC INSULATION
ACOUSTIC ROLL
An acoustic roll is excellent for use within plasterboard linings, floors and roofs. It effectively reduces reverberation. It’s also the best choice if you’re covering a very uneven wall or you have to work around roof beams in a loft space.
ACOUSTIC SLAB
Where you have a flat wall, easy access roof space or flooring to soundproof, then acoustic slabs are popular due to the fact they can be installed through simple friction fitting. Rockwool Acoustic insulation RWA45 is a particular favourite with customers – providing thermal insulation and fireproofing on top of its acoustic dampening credentials.
ACOUSTIC PLASTERBOARD
Plasterboards are a great option if you’re low on space. They are thin but effective, can be used directly on walls and ceilings or be installed between stud frames and can be directly plastered over.
SOUND PROOFING UNDERLAY
Sound proofing underlay is a great form of acoustic insulation that can benefit upper stores of a home and could even be installed beneath the floor finish on a staircase to minimise the noise of someone going up or down the stairs. Acoustic underlay will help you to enjoy a quieter life by reducing noise transfer between rooms and floors. A layer of acoustic underlay will minimise echoes, impact noise and airborne noise from traveling between floors.
100mm Knauf RS45 white tissue faced one side soffit board is a robust insulation slab, an A1 class rock mineral wool core faced with white tissue on one side, used for roofs and concrete car park soffits.
The white tissue facing on one side helps to avoid the slab edges from showing as shadows th..
White Tissue Faced Knauf RS45 Insulation Slab 100x600x1200mm
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
100mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material designed for use in multiple application..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
100mm Rockwool RWA45 Double Sided Black Tissue Faced Slab is a thermal, fire and acoustic insulation slab particularly suited for providing fire resistance and thermal insulation through concrete car park soffits and similar applications.
Rockwool RWA45 Insulation Slab 100mm x 600mm x 1200mm with..
Black Tissue Faced 2 Sides 100mm Rockwool RWA45 Insulation Slab
Class A1, non-combustible fire resistant resin bonded stone wool slab
Density of 45kg/m3 and thermal conductivity (lambda) of 0.035W/mK
Black tissue on 2 sides can provide from 30min up to 240min fire protection
For structural elements such as concrete car park soffits and similar applications
100mm Rockwool RWA45 Black Tissue Faced Slab is a thermal, fire and acoustic insulation slab particularly suited for providing fire resistance and thermal insulation through concrete car park soffits and similar applications.
1200mm x 600mm x 100mm Rockwool RWA45 Insulation Slab faced with black ..
100mm Rockwool RWA45 Black Tissue Faced Insulation Slab
A1, non-combustible fire resistant resin bonded stone wool
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
100mm White Tissue Faced 1 Side Slab Rockwool RWA45 is a soffit slab, a semi-rigid fire, thermal and acoustic insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Rockwool RWA45 Insulation Slab 100x600x1200mm faced with white tissue on 1..
100mm Rockwool RWA45 White Tissue Faced One Side Slab x1
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
100mm White Tissue Faced Both Sides Insulation Slab Rockwool RWA45 is a soffit slab, a semi-rigid fire, thermal and acoustic insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
RWA45 White Tissue Faced Two Sides Slab 100mm is a standard..
100mm Rockwool RWA45 White Tissue Faced Two Sides Slab x2
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
Black Tissue Faced 1 Side Knauf RS45 Insulation Slab 100mm is a fire, thermal and acoustic class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The black tissue facing on one side helps to avoid the slab edges fr..
100mm Black Tissue Faced Knauf Rocksilk RS45 Insulation Slab A1
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
100mm Black Tissue Faced on Both Sides Knauf Rocksilk RS45 Insulation Slab is a fire and acoustic class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The black tissue facings on two sides helps to avoid the slab..
100mm Black Tissue Faced 2 Sides Knauf RS45 Insulation Slab
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
100mm Knauf RS45 white tissue faced 2 sides soffit board is a strong and durable insulation slab, an A1 class rock mineral wool core faced with white tissue on one side, used for roofs and concrete car park soffits.
Knauf Rocksilk RS45 100mm is a standard density (45kg/m3) insulation slab with a ..
100mm White Tissue Faced 2 Sides Knauf RS45 Insulation Slab
From 30 up to 240 minutes fire protection (1200x600x100mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
100mm Rockwool RWA45 Insulation Slab (Prorox SL920) is a semi rigid non-combustible resin bonded fire resistant acoustic insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using RWA45 Acoustic Insulation in ceilings, walls and fl..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
100mm Terrawool TW50 Acoustic Insulation Slab density 50kg/m3 is an A1 class, non-combustible thermal and acoustic stone wool insulation slab used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab is a high-performance recyclable and..
22mm A2 Versapanel Cement Bonded Particle Board is a versatile class 0 building board offering exceptional strength, mechanical and acoustic performance compared with other exterior gypsum sheathing boards.
Euroform Versapanel 22mm is a robust building board that can be used in a wide range of re..
22mm Cement Bonded Particle Board CBPB
Versapanel A2, Class 0 Sheathing Building Board
Can be used in external and internal applications
Versatile Versapanel for residential and public applications
Exceptional strength, mechanical and acoustic performance
50mm Duct and Pipe Wrap (45kg/m3) Roll is a reinforced aluminium foil faced mineral wool non-combustible class A1 roll used for heating and ventilation pipe or duct work and liquid storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classif..
50mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
50mm Duct and Pipe Wrap (60kg/m3) Roll is a reinforced foil faced mineral wool non-combustible class A1 roll used for heating and ventilation pipe or duct work and liquid storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fi..
50mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
90mm Black Tissue Faced 1 Side Rockwool RW3 is a soffit insulation slab with 60kg density, a non-combustible fire resistant resin bonded stone wool core faced with black tissue on one side, used for concrete car park soffits.
Black Tissue Faced Rockwool RW3 (Formerly ProRox® SL 930) 90mm is a med..
90mm Rockwool RW3 Black Tissue Faced Insulation Slab A1
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Provides from 30 minutes up to 240 minutes fire protection
Fire resistant resin bonded stone wool slab 1200mm x 600mm
Used for structural elements such as concrete car park soffits
90mm Foil Backed Fire Slab Rockwool RW3 (3.60m² per pack) is a semi-rigid foil faced stone wool fire insulation resin bonded slab specifically designed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Slab 90mm (60kg per m3)..
Rockwool RW3 Foil Faced Fire Slab 90mm (60kg/m3)
Aluminium foil faced fire and acoustic stone wool slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
90mm Foil Faced 2 Sides Slab Rockwool RW3 (3.6m²) is a high-quality foil faced on both sides stone wool resin bonded slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Two Sides Fire Barrier Slab 90mm x 600mm x ..
Double Sided Foil Facing Fire Slab Rockwool RW3 - 90mm
Aluminium Foil Faced on Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
90mm Rockwool RW3 Fire, Thermal and Acoustic Insulation Slab (Prorox SL930) is a robust, medium-density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using Roc..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
90mm Rockwool RW3 White Tissue Faced Two Sides Insulation Slab is a robust class A1 fire resistant resin bonded wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
A special white tissue facings on both sides helps to avoid the sla..
90mm Rockwool RW3 White Tissue Faced 2 Sides Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
RW3 Rockwool Insulation Slab faced with White Tissue on one side is a 90mm thick, A1 class fire resistant resin bonded insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
This unique white tissue facing helps to avoid the slab edges fro..
90mm Rockwool RW3 White Tissue Faced 1 Side Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
90mm RW3 Black Tissue Faced Two Sides Slab (BTFx2) is a soffit insulation slab with 60kg density, a non-combustible fire resistant resin bonded stone wool core faced with black tissue on both sides, used for concrete car park soffits.
Black Tissue Faced Both Sides Rockwool RW3 (ProRox® SL930) 90m..
Black Tissue Faced 2 Sides 90mm Insulation Slab Rockwool RW3
Soffit Slab for providing fire resistance and thermal insulation
Used for structural elements such as concrete car park soffits
A1 class, non-combustible fire resistant stone wool insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Foil Faced 2 Sides Fire Slab Rockwool RWA45 100mm is a class 'O' aluminium foil faced on both sides fire barrier slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RWA45 Foil Faced Two Sides Fire Barrier Slab 100mm x 600mm x 1..
Foil Faced 2 Sides Fire Slab Rockwool RWA45 100mm
Aluminium Foil Faced Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
Foil Faced Fire Slab Rockwool RWA45 100mm is an aluminium foil faced fire stone wool insulation slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool Foil Faced Slab is a simple butt joint product that can be used where fire resi..
Rockwool RWA45 Foil Faced Fire Slab 100mm
Aluminium foil faced fire and acoustic stone wool slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
100mm Foil Faced 2 Sides Insulation Slab RW3 (2.88m²/pack) is a semi-rigid foil faced on both sides resin bonded fire insulation slab specifically developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Two Sides Fire Bar..
Double Sided Foil Facing Fire Slab Rockwool RW3 - 100mm
Aluminium Foil Faced on Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
100mm Foil Faced Slab RW3 (pack of 4 slabs) is a semi-rigid foil faced stone wool resin bonded slab used to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Slab 100mm (60kg per m3) is a simple butt joint product that can be us..
Rockwool RW3 Foil Faced Fire Slab 100mm (60kg/m3)
Aluminium foil faced fire and acoustic stone wool slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
100mm Black Tissue Faced 2 Sides Soffit Insulation Slab RW3 is an A1 class, non-combustible fire resistant resin bonded stone wool 60kg/m2 density insulation slab, used for structural elements such as concrete car park soffits.
Black Tissue Faced Both Sides Rockwool RW3 (ProRox® SL930) 100mm is a..
Black Tissue Faced 2 Sides 100mm Insulation Slab Rockwool RW3
Soffit Slab for providing fire resistance and thermal insulation
Used for structural elements such as concrete car park soffits
A1 class, non-combustible fire resistant stone wool insulation slab
Provides from 30 minutes up to 240 minutes fire protection
100mm Rockwool RW3 Black Tissue Faced Slab is a thermal, fire and acoustic insulation slab particularly suited for providing fire resistance and thermal insulation through concrete car park soffits and similar applications.
Black Tissue Faced Rockwool RW3 (Formerly ProRox® SL 930) 100mm is a medi..
100mm Rockwool RW3 Black Tissue Faced Insulation Slab A1
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Provides from 30 minutes up to 240 minutes fire protection
Fire resistant resin bonded stone wool slab 1200mm x 600mm
Used for structural elements such as concrete car park soffits
White Tissue Faced One Side Rockwool RW3 Slab 100mm is a soffit slab, A1 non-combustible fire, thermal and acoustic insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
This unique white tissue facing helps to avoid the slab edges from s..
100mm Rockwool RW3 White Tissue Faced 1 Side Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
100mm White Tissue Faced Both Sides Insulation Slab Rockwool RW3 is a soffit slab, class A1 fire rated, thermal and acoustic insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
A special white tissue facings on both sides helps to avoid..
100mm Rockwool RW3 White Tissue Faced 2 Sides Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
100mm Rockwool RW3 Thermal and Acoustic Insulation Slab (Prorox SL930) is a non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Rockwool Insulation Slab in ceilings,..
Rockwool RW3 is fire rated Euroclass A1 non-combustible
RW3 Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range applications
Durable insulation high performance over the lifetime of the building
120mm Terrawool TW50 Sound Insulation Slab is a standard density (50kg/m3) non-combustible thermal and acoustic stone wool insulation slab used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab is a high-performance recyclable and du..
130mm RWA45 Double Sided Black Tissue Faced Soffit Slab is a high impact fire insulation slab used as a fire resistant and thermal insulation for concrete car park soffits and similar applications.
Rockwool RWA45 Insulation Slab 130mm x 600mm x 1200mm with black tissue on 2 sides can provide from..
130mm Rockwool RWA45 Black Tissue Faced Slab is a hi impact soffit insulation slab particularly suited for providing fire resistance and thermal insulation through concrete car park soffits and similar applications.
Rockwool RWA45 Insulation Slab faced with black tissue on 1 side can provide from..
130mm Rockwool RWA45 Black Tissue Faced Soffit Insulation Slab
Class A1, non-combustible fire resistant resin bonded stone wool slab
Hi impact soffit slab provides from 30 up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
130mm White Tissue Faced Both Sides Soffit Insulation Slab Rockwool RWA45 is a hi impact soffit insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
RWA45 White Tissue Faced Two Sides Slab 130mm is a standard density 45kg/m3, semi-rigid ..
130mm Rockwool RWA45 White Tissue Faced Two Sides Slab x2
Semi-rigid, A1 non-combustible fire resistant soffit insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
130mm White Tissue Faced 1 Side Slab Rockwool RWA45 is a hi impact soffit insulation slab used for structural elements such as roofs, concrete car park soffits and similar applications.
RWA45 Insulation Slab faced with white tissue on 1 side can provide from 30 up to 240 minutes fire protection t..
130mm Rockwool RWA45 White Tissue Faced One Side Slab x1
Semi-rigid, A1 non-combustible fire resistant soffit insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
150mm Black Foil Backed RS45 Knauf is a high performance insulation slab made from non-combustible class A1 fire rated rock mineral wool insulation designed for concrete soffits.
Knauf RS45 1200mm x 600mm x 150mm black foil backed slab provides outstanding fire, thermal and acoustic performance f..
150mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
150mm RS45 Knauf Black Foil Faced and Backed Slab is a high performance insulation made from non-combustible class A1 fire rated rock mineral wool used for concrete soffits.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new bu..
150mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
150mm Black Tissue Faced 1 Side Insulation Slab Knauf RS45 is a standard density (45kg/m3) non-combustible rock mineral wool class A1 insulation slab, used for structural elements such as roofs and concrete car park soffits.
The black tissue facing on one side helps to avoid the slab edges from s..
150mm Black Tissue Faced Knauf Rocksilk RS45 Insulation Slab A1
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
Knauf Rocksilk RS45 Black Tissue Faced 2 Sides Insulation Slab 150mm is a strong and durable class A1 non-combustible rock mineral wool insulation slab, used for structural elements such as roofs and concrete car park soffits.
The black tissue facings on two sides helps to avoid the slab edges fr..
150mm Black Tissue Faced 2 Sides Knauf RS45 Insulation Slab
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
150mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 150mm foil backed insul..
150mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material designed for use in multiple application..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
150mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm foil slab provides outs..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
150mm Knauf RS45 White Tissue Faced Two Sides Insulation Slab is a robust class A1 soffit insulation slab, used as a fire, thermal and acoustic insulation for structural elements such as roofs and concrete car park soffits.
Knauf Rocksilk RS45 150mm is a standard density (45kg/m3) insulation slab..
150mm White Tissue Faced 2 Sides Knauf RS45 Insulation Slab
From 30 up to 240 minutes fire protection (1200x600x150mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
24mm Versapanel Cement Bonded Particle Board A2 is a versatile class 0 cement building board offering exceptional strength, mechanical and acoustic performance compared with other exterior gypsum sheathing boards.
Euroform Versapanel 24mm is a cement bonded building particle board that can be use..
24mm Cement Bonded Particle Board CBPB
Versapanel A2, Class 0 Sheathing Building Board
Can be used in external and internal applications
Versatile Versapanel for residential and public applications
Exceptional strength, mechanical and acoustic performance
55mm Fire Rated Lamella (45kg/m3) Roll, a duct wrap foil faced class A1 non-combustible mineral wool roll used for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, cla..
55mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
55mm Fire Rated Lamella (60kg/m3) Roll is a duct wrap foil faced class A1 non-combustible mineral wool roll used for heating and ventilation pipes, ducts, and water/oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fire..
55mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
Knauf RS45 White Tissue Faced 1 Side Slab is a 150mm thick A1 non-combustible soffit insulation slab, used as a fire, thermal and acoustic insulation for structural elements such as roofs and concrete car park soffits.
The white tissue facing on one side helps to avoid the slab edges from showing..
White Tissue Faced Knauf RS45 Insulation Slab 150x600x1200mm
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
130mm Knauf Rocksilk RS45 Black Tissue Faced 2 Sides Slab is an A1 class non-combustible rock mineral wool insulation slab, used for structural elements such as roofs and concrete car park soffits.
The black tissue facing helps to avoid the slab edges from showing as shadows through the perforate..
130mm Black Tissue Faced 2 Sides Knauf RS45 Insulation Slab
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
160mm Black Tissue Faced 2 Sides High Impact Insulation Slab RWA45 is a car park soffit fire rated insulation slab used as a fire resistant and thermal insulation for concrete car park soffits and similar applications.
Rockwool RWA45 Insulation Slab 160mm faced with black tissue on 2 sides can pr..
160mm Black Tissue Faced Soffit Insulation Slab (Rockwool RWA45) is a car park soffit insulation slab used for providing fire resistance and thermal insulation through concrete car park soffits and similar applications.
Rockwool RWA45 Insulation Slab faced with black tissue on one side can provid..
160mm Rockwool RWA45 Black Tissue Faced Soffit Insulation Slab
Class A1, non-combustible fire resistant resin bonded stone wool slab
Hi impact soffit slab provides from 30 up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
160mm White Tissue Faced 1 Side Slab Rockwool RWA45 is a 45kg density hi impact soffit insulation slab used for structural elements such as roofs, concrete car park soffits and similar applications.
RWA45 Insulation Slab faced with white tissue on 1 side can provide from 30 up to 240 minutes fire..
160mm Rockwool RWA45 White Tissue Faced One Side Slab x1
Semi-rigid, A1 non-combustible fire resistant soffit insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
160mm Soffit Insulation Slab Rockwool RWA45 White Tissue Faced Both Sides is a soffit insulation slab, used for structural elements such as roofs, concrete car park soffits and hi impact applications.
RWA45 White Tissue Faced Two Sides Slab 160mm is a standard density 45kg/m3, semi-rigid soffit i..
160mm Rockwool RWA45 White Tissue Faced Two Sides Slab x2
Semi-rigid, A1 non-combustible fire resistant soffit insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
60mm Class A1 Lamella Roll 45kg/m3, a mineral wool roll with a reinforced aluminium foil facing designed for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classifie..
60mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
60mm Class A1 Lamella Roll (60kg/m3) is an insulation roll with a reinforced foil facing designed for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and f..
60mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
65mm 45kg/m3 Lamella Mat A1 is a fire, thermal and condensation insulation roll, made from non-combustible class A1 mineral wool faced with reinforced foil used for pipes, ductwork and storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, cla..
65mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
65mm 60kg/m3 Lamella Mat Class A1 is a fire, thermal and condensation insulation roll, made from non-combustible class A1 mineral wool faced with foil used for pipes, ducts and vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fire..
65mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
70mm Mineral Wool Roll (45kg/m3) for Duct Work is used as a fire, thermal and condensation insulation solution for heating pipe, ventilation pipe, duct work, air ducts and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, cla..
70mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
70mm Mineral Wool Class A1 Roll (60kg/m3) for Duct Work is used as a fire, thermal and condensation insulation for heating and ventilation pipes, air ducts and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and ..
70mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
75mm Class A1 Foil Faced (45kg/m3) Roll is a non-combustible mineral wool roll faced with reinforced aluminium foil used for heating and ventilation pipes, ductwork and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classi..
75mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
75mm Class A1 Foil Faced (60kg/m3) Roll, a non-combustible mineral wool faced with aluminium foil used mainly for heating and ventilation pipes, ductwork and water or oil storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fi..
75mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
80mm Mineral Wool A1 (45kg/m3) Lamella Mat, a HVAC foil backed non-combustible roll used for heating pipe, ventilation pipe, duct work, air ducts, air conditioning and water or oil storage vessels.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classif..
80mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
80mm Mineral Wool Class A1 (60kg/m3) Lamella Mat, a HVAC foil backed non-combustible insulation roll used for heating and ventilation pipes, ducts, air conditioning and storage vessels.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fire..
80mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
90mm Foil Faced Roll, a 45kg/m3 density, class A1 non-combustible mineral wool mat with reinforced aluminium foil facing on one side used mainly for HVAC (heating, ventilation, and air conditioning).
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, class..
90mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
90mm Foil Faced Lamella Roll, a 60kg/m3 density, class A1 non-combustible insulation roll with reinforced foil facing on one side used for HVAC (heating, ventilation, and air conditioning).
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and ..
90mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
100mm 45kg/m3 Mineral Wool Foil Faced Duct Roll, a non-combustible class A1 lamella mat backed with reinforced aluminium foil used for HVAC (heating, ventilation, and air conditioning).
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classified as Class..
100mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
100mm 60kg/m3 Mineral Wool Foil Faced Roll, a non-combustible class A1 mineral wool roll backed with reinforced aluminium foil used for HVAC (heating, ventilation, and air conditioning).
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fir..
100mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts