Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Acoustic wall insulation, so called sound insulation, helps reduce sound transfer through both internal and external walls in residential and commercial properties, in order to enrich modern living. Acoustic product straightforwardly absorbs sound waves and reduces vibration due to its density. Because of that, it promotes comfort and privacy, protecting people from ‘outside-to-inside’ noise such as traffic, and ‘inside-to-inside’ noise from neighbouring dwellings. The design of acoustic insulation allows sound waves to be absorbed and prevents noise reverberation off other surfaces. Sound insulation is especially designed to reduce the number of decibels (dB). The first step in the soundproofing installation process will be to add mass to the walls. Second would be minimising the circulation of sound vibration. The most effective soundproofing solutions don't just add more of the same mass, they add mass which is comprised of different materials. Acoustic insulation is often thick, very dense material placed between the wall, plasterboard, partition, ceiling or floor. There are many ways to reduce acoustic levels by using the appropriate materials such as:
The installation of those materials should result in the reduction of decibels (dB) or absorption of sound. The best choice will depend on the desirable noise minimisation, a level which is normally indicated in the form of a dB rating. It’s also worth keeping in mind that soundproofing materials will only be as strong as their weakest point.
TYPES OF NOISE
Airborne and Impact are the main types of noise.
Airborne noise is quite simply noise transmitted through the air. It might be generated by everything from a television, home appliances, music to a barking dog. The production of airborne and structural sounds is often connected, with one causing the other.
Impact noise is vibration such as footsteps, scraping of furniture or doors banging. To prevent sound vibrations traveling through buildings, the vibration needs to be dampened to stop it from travelling through. The most effective way to stop sound vibration energy from traveling through is to decouple the structure and then add mass. Other options include the installation of floating floors and acoustic ceiling systems.
WHAT IS SOUNDPROOFING?
Soundproofing is a method for the reduction of sound pressure in relation to a particular sound source and receptor. It may also be referred to as decibel reduction. Soundproofing materials enable the minimisation of sound in the following ways:
Blocking airborne noise through the addition of mass to a structure
Separating the impact noise between structures
Absorbing sound
UK NOISE LAWS AND REGULATIONS
The soundproofing requirements for new homes and conversions are set out in part E (Resistance to Sound) of the UK Building Regulations. This covers the division of walls and floors. It will be necessary to install a range of acoustic products for compliance with part E of the regulations. The regulations specifically state that internal airborne sound resistance inside any dwelling must be a minimum of 40dB. Impact sounds must also be limited to 62dB for set floors and stairs in new builds as well as 64dB in conversion projects. The regulations specify the need for there to be some type of acoustic insulation between the flooring joists. The fitting of such insulation will result in the increase of mass and the minimisation of airborne sound. The ceiling should also be boarded with two layers of acoustic plasterboard. Acoustic underlay mats will be sufficient for the soundproofing of floors complete with sub-flooring. An acoustic underlay may be added to ensure compliance with the soundproofing standards. Blocks with a density of at least 7 kilonewtons should be used for the effective minimisation of flanking noise and to ensure compliance with UK Building Regulations.
HOW TO SOUNDPROOF STUD WALL?
The first key step when soundproofing a stud wall will be to carry out a check for any gaps or weak points. These can be filled with acoustic sealant for improved security. The process may then continue with the improvement of walling mass and the addition of acoustic insulation between the timber battens. It is advisable to use a combination of materials for the limitation of noise at different frequencies. Alternative methods for soundproofing walls include the installation of thin sound panels and complete acoustic wall systems. Soundproofing panels allow for the effective minimisation of sound without the need to sacrifice any interior space. However, a combination of materials should be used in instances requiring a high degree of soundproofing.
NOISY NEIGHBOURS
Noise disturbance is by far the most common anti-social behavior reported to the police, local authorities and housing associations. If your life is made a misery by rowdy neighbours who regularly throw noisy parties or play loud music throughout the day and night there are now a range of measures you can use to silence their inconsiderate and selfish behavior once and for all. Neighbours who make too much noise can be fined up to £5,000 or have their music systems confiscated. For most disturbances, though, such as barking dogs, loud music or DIY activities, the first step is to talk to the person responsible for the noise and point out the problem. People can be blissfully unaware they are disturbing you especially if you have poor sound insulation.
TYPES OF ACOUSTIC INSULATION
ACOUSTIC ROLL
An acoustic roll is excellent for use within plasterboard linings, floors and roofs. It effectively reduces reverberation. It’s also the best choice if you’re covering a very uneven wall or you have to work around roof beams in a loft space.
ACOUSTIC SLAB
Where you have a flat wall, easy access roof space or flooring to soundproof, then acoustic slabs are popular due to the fact they can be installed through simple friction fitting. Rockwool Acoustic insulation RWA45 is a particular favourite with customers – providing thermal insulation and fireproofing on top of its acoustic dampening credentials.
ACOUSTIC PLASTERBOARD
Plasterboards are a great option if you’re low on space. They are thin but effective, can be used directly on walls and ceilings or be installed between stud frames and can be directly plastered over.
SOUND PROOFING UNDERLAY
Sound proofing underlay is a great form of acoustic insulation that can benefit upper stores of a home and could even be installed beneath the floor finish on a staircase to minimise the noise of someone going up or down the stairs. Acoustic underlay will help you to enjoy a quieter life by reducing noise transfer between rooms and floors. A layer of acoustic underlay will minimise echoes, impact noise and airborne noise from traveling between floors.
40mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust, medium-density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Insulation in cei..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
40mm Rockwool RWA45 Acoustic Insulation Slab (Prorox SL920) is a non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using RWA45 Rockwool Insulation in ceilings, walls and flo..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
Rockwool RW3 White Tissue Faced 1 Side Slab 40mm is a semi-rigid, A1 non-combustible fire resistant resin bonded insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
This special white tissue facing helps to avoid the slab edges from sho..
40mm Rockwool RW3 White Tissue Faced 1 Side Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
40mm RWA45 White Tissue Faced 2 Sides Slab is a semi-rigid, A1 non-combustible fire resistant resin bonded insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
White Tissue Faced Two Sides RWA45 (Formerly ProRox SL 920) is a standard den..
40mm Rockwool RWA45 White Tissue Faced Two Sides Slab x2
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
40mm RWA45 White Tissue Faced One Side Slab is a semi-rigid, A1 non-combustible fire resistant resin bonded insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Rockwool RWA45 Insulation Slab 40x600x1200mm faced with white tissue on 1 si..
40mm Rockwool RWA45 White Tissue Faced One Side Slab x1
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
40mm Rockwool RW3 White Tissue Faced 2 Sides Insulation Slab is an A1 non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
An unique white tissue facings on both sides helps to avoid..
40mm Rockwool RW3 White Tissue Faced 2 Sides Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
50mm Black Foil Faced RS60 Knauf Slab is an aluminium black foil faced to one side insulation slab with an excellent class A1 fire performance used for concrete soffits.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that..
50mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
50mm Black Foil Faced x2 Sides RS60 Knauf is a fire non-combustible insulation slab faced with a composite black foil on two sides providing an excellent class A1 fire performance.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy special..
50mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
50mm RW5 Foil Backed Rockwool Insulation Slab is a 100kg density per cubic meter foil faced fire and acoustic stone wool insulation slab used to prevent the spread of flames, heat, smoke and fire through concealed spaces in buildings.
Rockwool RW5 Foil Backed Slab is an A1 class, non-combustible ..
50mm Foil Faced 1 Side Insulation Slab Rockwool RW5
100kg density - Foil Faced on One Side Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
50mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil slab provides outstandi..
50mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 50mm aluminium foil insu..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
50mm RS140 Knauf Rocksilk is a non-combustible rock mineral wool insulation slab with the best possible Euroclass A1 reaction to fire classification used in multiple thermal and acoustic applications.
RS140 Rocksilk is manufactured with a density of 140kg/m3, designed for use in a variety of appl..
50mm x 600mm x 1200mm Knauf Rocksilk RS140 (140kg/m3)
Class A1 Non-combustible Rigid Rock Mineral Wool Insulation Slab
Fire, thermal and acoustic insulation slab used for building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceiling, timber & steel frame
50mm Knauf Rocksilk RS60 (60kg) Black Tissue Faced Two Sides Insulation Slab is a strong and durable class A1 non-combustible rock mineral wool insulation slab, used for structural elements such as roofs and concrete car park soffits.
Knauf RS60 Slab (50mm x 600mm x 1200mm) faced with black tissu..
50mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
50mm White Tissue Faced 1 Side Knauf RS60 Insulation Slab is a rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs and concrete car park soffits.
The white tissue facing on one side helps to avoid the slab edges from showing as shadows thr..
50mm White Tissue Faced 1 Side Knauf RS60 60kg Insulation Slab
From 30 up to 240 minutes fire protection (1200x600x50mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
Knauf RS60 Black Tissue Faced One Side Soffit Slab 50mm is an A1 class, non-combustible fire resistant rock mineral wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
50mm Knauf Rocksilk RS60 is a medium density (60kg/m3) insulati..
Black Tissue Faced Knauf Rocksilk RS60 Insulation Slab A1 (50mm)
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
50mm Rockwool RW5 Foil Faced Two Sides Insulation Slab is a resin bonded, rigid foil faced on both sides stone wool 100kg density insulation slab used to prevent the spread of flames and inhibit heat through concealed spaces in buildings.
Foil Faced Two Sides Fire Barrier Slab RW5 50mm x 600mm x ..
50mm Double Sided Foil Faced Fire Slab Rockwool RW5
100kg density - Foil Faced on Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
White Tissue Faced 2 Sides Knauf RS60 Insulation Slab 50mm is a rock mineral wool based, class A1 insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
50mm RS60 is a medium density (60kg/m3) insulation slab with a certified thermal condu..
50mm Black Tissue Faced Insulation Slab RW5 is a fire, thermal and acoustic insulation slab particularly suited for providing fire resistance and thermal insulation through concrete car park soffits and similar applications.
Rockwool RW5 Insulation Slab 50mm x 600mm x 1200mm with black tissue on ..
50x600x1200mm Rockwool RW5 Black Tissue Faced Slab A1
Formerly ProRox® SL960 Thermal conductivity of 0.034W/mK
Used for structural elements such as concrete car park soffits
A1 class, non-combustible fire resistant stone wool insulation slab
Provides from 30 minutes up to 240 minutes fire protection
50mm Rockwool RW5 Insulation Slab (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant acoustic insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using Rockwool RW5 Insulation in ..
RW5 is rated Euroclass A1 non-combustible
Excellent thermal, Acoustic (100kg density) and fire performance
50mm Terrawool TW50 Sound Insulation Slab is a standard density (50kg/m3) non-combustible thermal and acoustic stone wool insulation slab used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab is a high-performance recyclable and dur..
Rockwool RW5 White Tissue Faced 2 Sides 50mm Insulation Slab is a robust class A1 fire resistant resin bonded stone wool rigid insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
This special white tissue facings on both sides helps to ..
Rockwool RW5 White Tissue Faced 2 Sides Insulation Slab 50mm
Robust A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 100kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
White Tissue Faced One Side Slab Rockwool RW5 is a 50mm thick insulation slab, a non-combustible rigid stone wool board faced with white tissue used as a fire resistant and thermal insulation for roofs and concrete car park soffits.
The white tissue facing on one side helps to avoid the slab edge..
50mm White Tissue Faced 1 Side Rockwool RW5 Insulation Slab
High-density 100kg/m3 and an excellent sound absorbing qualities
Provides from 30 minutes up to 240 minutes fire protection
Certified thermal conductivity (lambda value) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
5mm x 75mm Isocheck Isolation Strip is an acoustic self adhesive isolation strip used for joists and studs to increase impact sound insulation, a cross linked Isopoli foam strip with a self adhesive layer backing.
Isolation Strip is used for upgrades when looking to increase impact sound insulati..
5mm x 75mm Isocheck Acoustic Isolation Strip for Joists and Studs
Made from a cross linked Isopoli foam and a self adhesive layer backing
Increase impact sound insulation and reduce structure-borne noise
Self Adhesive Isolation Strip for easy application to the studs or joists
Noise reduction system used for partition/separating walls and floors
60mm URSA Terra Acoustic Partition Roll APR is a glass mineral wool sound insulation roll, offering sound absorption and noise reduction in timber or metal framed internal partition walls, separating walls and floors.
Acoustic Partition Roll 60mm is a cost effective way of insulating both new and..
6mm Isocheck Re-Mat Base 6 is an under screed acoustic underlay roll specially designed to reduce impact sound transmission through all types of structural concrete floors.
Under Screed System Isocheck Re-Mat Base 6 is suitable for all types of concrete floors in new build, refurbishment and conv..
6mm Isocheck Re-Mat Base 6 Acoustic Under Screed Underlay (12.5m2 roll)
Reduce impact sound transmission through all types of structural concrete floors
For all types of concrete floors in new build, refurbishment and conversion projects
Complies with the latest version of Approved Document E of the Building Regulations
Rubber layer to be placed within a masonry structural floor directly below the screed
70mm Knauf Rocksilk Flexible Insulation Slab is a thermal and acoustic multi-purpose rock mineral wool insulation slab which can be used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Knauf Flexible is non..
75mm Rockwool RW6 Foil Faced x2 Sides Slab is an insulation suitable for a wide range of applications, an A1 class non-combustible insulation slab with an excellent fire, thermal and acoustic properties.
Foil Faced Two Sides (FFx2) Rockwool RW6 75x600x1200mm fire performance integrity is 240 minu..
75mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
75mm Isocheck Deep Batten 75RD is a suspended floor system specially designed for timber and steel frame floors and can be used in conjunction with underfloor heating systems.
Deep Batten System is designed to be used over timber floors with a timber frame or masonry facade (to hide services or a..
75mm x 45mm x 1800mm Isocheck Deep Batten 75RD UFH System
Suspended floor system specially designed for timber and steel floors
Can be used in conjunction with underfloor heating (UFH) systems
Suitable for conversions, refurbishments or new build projects
Sound transmission and New Build Robust Detail descriptive FFT1
75mm APR Knauf Earthwool Acoustic Insulation Roll is a non-combustible glass mineral wool acoustic insulation roll which offers high level of sound absorption and noise reduction in internal wall, partitions and floor applications.
Sound Insulation Roll 75mm is manufactured using Knauf ECOSE Tech..
75mm Rockwool RW6 is a versatile slab suitable for a wide range of building applications, an A1 non-combustible resin bonded insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Slab is manufactured in 140kg density per cubic meter (140kg/m3), specially designed for us..
75mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
75mm Rockwool RW6 Foil Faced 1 Side is an insulation slab suitable for a wide range of building applications, an A1 non-combustible insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Foil Faced x1 Side Slab 75x600x1200mm fire performance integrity is 240 minutes, and..
75x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
81mm Soffit Liner Insulated Panel (75mm RWA45 & 6mm Masterboard) is a high performance class A1 soffit liner insulation board that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using high performing, non-combustible ..
81mm Soffit Liner Insulation Board A1 Class Non-combustible
75mm Rockwool RWA45 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
81mm Soffit Linerboard Insulation Slab (75mm RW5 and 6mm Masterboard) is used to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RW5 insulation slab faced with 6mm Promat Masterboard (fire..
81mm Soffit Liner Insulation Board A1 Class Non-combustible
75mm Rockwool RW5 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
87mm Soffit Liner Panel A1 (75mm RWA45 & 12mm Masterboard) is an ultimate class A1 soffit liner insulation board that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RWA45 insulation slab..
87mm Soffit Liner Insulation Board A1 Class Non-combustible
75mm Rockwool RWA45 bonded to 12mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
9mm Screedcheck XL9 Impact Improvement System, comprises a closed cell isopoli, cross linked polyethylene foam layer specially designed to be placed within a masonry structural floor directly below the screed.
Isocheck Screedcheck XL9 System from Isomass features a 9mm closed cell cross linked fo..
9mm Isocheck Screedcheck XL9 Impact Noise Improvement 60m2 Roll
50mm RW5 Black Tissue Faced Two Sides Soffit Slab is a non-combustible A1 insulation slab faced with black tissue on both sides, used for providing fire resistance and thermal insulation for structural elements and similar applications.
Black Tissue Faced Both Sides Rockwool RW5 50mm (Formerly Pr..
CT1 Silicone Sealant & Adhesive CLEAR (Transparent) 290ml is a highly flexible hybrid polymer based silicone sealant and adhesive that can be used to seal: solid wall insulation, render-only systems, baths, showers, roofs, doors, windows, and gutters.
Clear (transparent) colour silicone sealant a..
CT1 Silicone Sealant and Adhesive - Clear (Transparent)
Stixall Extreme Power Silicone Sealant – Colour Black (290ml) is an ultimate combined high-grab building adhesive and sealant offering a high strength adhesion and gap-filling capabilities that can be applied to a wide range of substrates.
Everbuild Stixall is a one part, chemically curing sealan..
Everbuild Stixall Extreme Power BLACK
High-grab building adhesive and sealant 290ml
High strength adhesion and gap-filling capabilities
Foil Faced 2 Sides Fire Slab Rockwool RWA45 40mm is a high performance aluminium foil faced on both sides stone wool core fire slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RWA45 Foil Faced Two Sides Fire Barrier Slab 40m..
Foil Faced 2 Sides Fire Slab Rockwool RWA45 40mm
Aluminium Foil Faced Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
Rockwool RWA45 Foil Faced Fire Slab 40mm is a robust aluminium foil faced fire and acoustic stone wool core insulation slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Foil Faced Slab is a simple butt joint product that can be used w..
Rockwool RWA45 Foil Faced Fire Slab 40mm
Aluminium foil faced fire and acoustic stone wool slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
Isocheck Isoblock 28mm x 35mm x 138mm is an ultimate acoustic isolating system clip used with Isobar resilient channel to provide superior noise control for ceilings, floors and walls.
Isomass Isocheck Isobar and Isoblock is a sound reduction system designed to offer a more robust alternative to ..
Isocheck Isoblock (28mm deep x 35mm wide x 138mm long)
Isocheck Isoblock Clip designed for ceilings, floors and walls
Used to provide superior noise control (sound reduction system)
Vibration absorbing clip which is secured to studs and joists
Isolation solution to construct separating and partition walls and ceilings
Knauf RS100 Black Tissue Faced 2 Sides Insulation Slab is a 40mm thick fire and acoustic rock mineral wool insulation slab, used for providing fire resistance and thermal insulation for roofs, concrete car park soffits and similar applications.
Rocksilk RS100 is an ultimate (100kg per cubic metre..
40mm Knauf RS100 Black Tissue Faced Two Sides Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Provides from 30 minutes up to 240 minutes fire protection
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Used for structural elements such as concrete car park soffits
Knauf Rocksilk RS100 White Tissue Faced 1 Side Insulation Slab is a 40mm thick, 100kg/m3 density class A1 soffit insulation slab, used as a fire, thermal and acoustic insulation board for structural elements.
Rocksilk RS100 is a high density (100kg/m3) insulation slab with a certified thermal con..
40mm Knauf RS100 White Tissue Faced 1 Side Insulation Slab - 100kg
From 30 up to 240 minutes fire protection (1200x600x40mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
100mm Rockwool RW6 (140kg) is suitable for a wide range of general building applications, a rigid class A1 resin bonded stone wool insulation slab with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Slab is manufactured in 140kg density per cubic meter (140kg/m3), specially desi..
100mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
100mm Knauf Earthwool Acoustic Insulation Roll is a glass mineral wool acoustic insulation roll which offers high level of sound absorption and noise reduction in internal wall, partitions and floor applications.
Knauf APR Sound Insulation is a non-combustible acoustic roll manufactured using ECO..
100mm Foil Backed on Both Sides Rockwool RW6 is a foil faced on 2 sides insulation used where fire rating is crucial, an A1 rigid insulation slab with an excellent fire, thermal and acoustic properties.
Foil Faced Two Sides (FFx2) Rockwool RW6 100x600x1200mm fire performance integrity is 240 minu..
100mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
Foil Backed Rockwool RW6 is a 100mm thick foil faced on one side insulation slab used where fire rating is crucial, a rigid class A1 insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Foil Faced x1 Side Slab 100x600x1200mm fire performance integrity is 240 minutes, a..
100x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
106mm Soffit Liner Insulated Panel (100mm RWA45 & 6mm Masterboard) is a class A1 non-combustible soffit liner insulation board that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using high performing, non-combustible..
106mm Soffit Liner Insulation Board A1 Class Non-combustible
100mm Rockwool RWA45 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
106mm Soffit Linerboard Insulation A1 (100kg RW5 Slab) is a class A1 non-combustible soffit board used to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RW5 insulation slab faced with 6mm..
106mm Soffit Liner Insulation Board A1 Class Non-combustible
100mm Rockwool RW5 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
10mm Isocheck Re-Mat Base 10 is an acoustic under screed underlay roll specially designed to reduce impact sound transmission through all types of structural concrete floors.
Under Screed System Isocheck Re-Mat Base 10 is suitable for all types of concrete floors in new build, refurbishment and c..
10mm Isocheck Re-Mat Base 10 Acoustic Under Screed Underlay (7.5m2 roll)
Reduce impact sound transmission through all types of structural concrete floors
For all types of concrete floors in new build, refurbishment and conversion projects
Complies with the latest version of Approved Document E of the Building Regulations
Rubber layer to be placed within a masonry structural floor directly below the screed
Self Adhesive Isocheck Acoustic Isolation Strip 10m roll is a 10mm thick, 100mm wide isolation strip made from a cross linked Isopoli foam used for the reduction of structure-borne and foot fall noise.
Isolation Strip is used for upgrades when looking to increase impact sound insulation from foot..
10x100mm Isocheck Acoustic Isolation Strip Self Adhesive 10m Roll
Made from a cross linked Isopoli foam and a self adhesive layer backing
Increase impact sound insulation and reduce structure-borne noise
Self Adhesive Isolation Strip for easy application to the studs or joists
Noise reduction system used for partition/separating walls and floors
112mm Soffit Liner Insulation Board (100mm RWA45 & 12mm Masterboard) is an advanced class A1 soffit liner insulation that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RWA45 insulation ..
112mm Soffit Liner Insulation Board A1 Class Non-combustible
100mm Rockwool RWA45 bonded to 12mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
A2 Versapanel Cement Bonded Particle Board 16mm is a versatile class 0 building board offering exceptional strength, mechanical and acoustic performance compared with other exterior gypsum sheathing boards.
16mm Versapanel is a robust building board that can be used in a wide range of residential..
16mm Cement Bonded Particle Board CBPB
Versapanel A2, Class 0 Sheathing Building Board
Can be used in external and internal applications
Versatile Versapanel for residential and public applications
Exceptional strength, mechanical and acoustic performance
25mm Acoustic Partition Insulation Roll APR Superglass Multi-Acoustic is a flexible unfaced glass mineral wool insulation roll used in internal partition walls, framed separating walls and timber separating floors.
Superglass APR Rolls are deemed non-combustible and have a fire classification of..
27mm Isocheck 27C is used over concrete floors for new build, refurbishment and conversion projects, an acoustic overlay platform system designed to reduce impact sound transmission through concrete floors.
Acoustic Overlay Isocheck 27C system does not need the additional protection of a moisture..
27mm Isocheck 27C Acoustic Overlay Platform System (Floorboard)
Acoustic overlay floor system specially designed for concrete floors
27C is suitable for new build projects, refurbishments and conversions
Meet the sound transmission standards of Approved Document E 2003
May also be installed in conjunction with underfloor heating systems
28mm Isocheck 28T Acoustic Overlay Board, a high performance system specially designed to reduce sound transmission through traditional joisted timber floors for new build, refurbishments or conversions.
Acoustic Overlay Platform System for Timber Floors Isocheck 28T 2400mm x 600mm x 28mm consi..
35mm HVAC Mineral Wool Lamella Mat is used for heating and ventilation pipe or duct work and water/oil storage vessels, an A1 class non-combustible (45kg/m3) mineral wool faced with aluminium foil.
HVAC Lamella Mat is manufactured with a density of 45kg/m3 with excellent fire performance, classif..
35mm Foil Faced Mineral Wool Roll (Density 45kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
35mm HVAC Lamella Mat is used for heating and ventilation pipe or duct work and water/oil storage vessels, an A1 class non-combustible (60kg/m3) mineral wool faced with aluminium foil.
60kg Density Foil Backed Lamella Mat is a high performance insulation which provides acoustic, thermal and fire ..
35mm Foil Faced Mineral Wool Roll (Density 60kg/m3) Lamella Mat A1
A1 class non-combustible mineral wool roll faced with aluminium foil
Used for heating and ventilation pipes, ducts and water/oil storage vessels
Acoustic, thermal and fire insulation (anti condensation and anti moisture)
Help to prevent condensation from forming on the pipes and ducts
The Monodeck 37T is used directly to joists for conversions, refurbishments, new build or listed buildings requiring minimal structural change with a new plasterboard or existing lath and plaster ceiling.
Isomass Monodeck 37T floor board is a 37mm thick acoustic insulation consisting of a layer o..
37mm Monodeck 37T Direct to joists Acoustic Floor Insulation Board
Enables a timber floor to meet the sound transmission regulations
Provides approx. 52dB airborne and 51dB impact noise reduction
Suitable for conversions, refurbishments or new build projects
Meet the sound transmission regulations of Approved Document E 2003
3mm Isocheck Internal Packer is used for the suspended acoustic cradles system as a timber batten support especially for uneven or cambered concrete floors to reduce sound transmission.
Isocheck Cradle System is New Build Robust Detail compliant for masonry floor construction and where the struct..
3mm Internal Packers for Isocheck Acoustic Cradles (pack of 500 packers)
Used as a part of suspended acoustic cradle system (timber batten support)
Designed for an acoustic cradles system, a levelling system for floors
Meet the sound transmission standards of Approved Document E 2003
New Build Robust Detail descriptive FFT2 (E-FC-1, E-FS-1, E-FC-2 and E-FC-7)
50mm Black Foil Faced Knauf RS45 is a fire-resistant thermal and acoustic insulation slab specially designed for concrete soffits, an A1 class non-combustible rock mineral wool.
Knauf RS45 1200mm x 600mm x 50mm black foil backed slab provides outstanding fire, thermal and acoustic performance for..
50mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
50mm Double Sided Aluminum Foil Insulation Slab RW3 (5.76m²/pack) is a non-combustible foil faced on both sides stone wool resin bonded slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Two Sides Fire Barrier S..
Double Sided Foil Facing Fire Slab Rockwool RW3 - 50mm
Aluminium Foil Faced on Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
50mm Black Foil Faced 2 Sided Knauf RS45 is a fire, thermal and acoustic insulation slab specially designed for concrete soffits, an A1 class non-combustible rock mineral wool.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new..
50mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
50mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 50mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
50mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 50mm aluminium fo..
50mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 50mm foil backed slab pr..
50mm Foil Faced Fire Slab Rockwool RW3 (5.76m² / pack) is a high-quality foil backed stone wool fire insulation slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Slabs (60kg per m3) are simple butt joint produc..
Rockwool RW3 Foil Faced Fire Slab 50mm (60kg/m3)
Aluminium foil faced fire and acoustic stone wool slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
50mm Foil Faced on Both Sides Rocksilk RS100 Knauf Fire Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil-faced two-sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200 x 600 x 50mm alumi..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations Euroclass A1
Density 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible material
Provides excellent fire, thermal and acoustic performance.
50mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) non-combustible rock mineral wool unfaced rigid slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
50mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material designed for use in multiple applications..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
50mm Rockwool RW3 Black Tissue Faced 2 Sides Insulation Slab is a strong, rigid A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits.
Black Tissue Faced Both Sides Rockwool RW3 (ProRox® SL930) 50mm is a me..
Black Tissue Faced 2 Sides 50mm Insulation Slab Rockwool RW3
Soffit Slab for providing fire resistance and thermal insulation
Used for structural elements such as concrete car park soffits
A1 class, non-combustible fire resistant stone wool insulation slab
Provides from 30 minutes up to 240 minutes fire protection
50mm Black Tissue Faced Soffit Insulation Slab Rockwool RW3 is an A1 class, 60kg density non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits.
Black Tissue Faced Rockwool RW3 (Formerly ProRox® SL 930) is a medium-de..
50mm Rockwool RW3 Black Tissue Faced Insulation Slab A1
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Provides from 30 minutes up to 240 minutes fire protection
Fire resistant resin bonded stone wool slab 1200mm x 600mm
Used for structural elements such as concrete car park soffits
50mm Rockwool RWA45 Black Tissue Faced Slab is a strong semi-rigid, 45kg density non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits.
Rockwool RWA45 Insulation Slab 50mm x 600mm x 1200mm faced with black tissue on ..
50mm Rockwool RWA45 Black Tissue Faced Insulation Slab
A1, non-combustible fire resistant resin bonded stone wool
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
50mm Rockwool RWA45 Black Tissue Faced 2 Sides Slab is a strong semi-rigid A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits.
Rockwool RWA45 Insulation Slab 50mm x 600mm x 1200mm with black tissue on 2 ..
Black Tissue Faced 2 Sides 50mm Rockwool RWA45 Insulation Slab
Class A1, non-combustible fire resistant resin bonded stone wool slab
Density of 45kg/m3 and thermal conductivity (lambda) of 0.035W/mK
Black tissue on 2 sides can provide from 30min up to 240min fire protection
For structural elements such as concrete car park soffits and similar applications
50mm Knauf RS100 Black Tissue Faced Insulation Slab is an acoustic rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Knauf Rocksilk RS100 is a high density (100kg/m3) insulation slab w..
50mm Knauf RS100 Black Tissue Faced 1 Side Insulation Slab A1
High density 100kg/m3 Thermal conductivity (lambda) 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
Black Tissue Faced on Both Sides Slab Knauf RS100 50mm is a rigid insulation slab, an A1 non-combustible rock mineral wool core faced with black tissue on both sides, used for roofs, concrete car park soffits and similar applications.
Rocksilk RS100 is an ultimate (100kg per cubic metre density) ..
50mm Knauf RS100 Black Tissue Faced Two Sides Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Provides from 30 minutes up to 240 minutes fire protection
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Used for structural elements such as concrete car park soffits
50mm White Tissue Faced One Side Knauf RS100 Insulation Slab is a rock mineral wool based, class A1 non-combustible soffit insulation slab, used for structural elements such as roofs and concrete car park soffits.
Rocksilk RS100 is a high density (100kg/m3) insulation slab with a certified therma..
50mm Knauf RS100 White Tissue Faced 1 Side Insulation Slab - 100kg
From 30 up to 240 minutes fire protection (1200x600x50mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
50mm White Tissue Faced 2 Sides Knauf RS100 Insulation Slab is a rigid A1 class, non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The white tissue facings on both sides helps to avoid the slab edges from showing as sh..
50mm Knauf RS100 White Tissue Faced 2 Sides Insulation Slab
From 30 up to 240 minutes fire protection (50x600x1200mm)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
50mm RS45 Black Tissue Faced One Side Soffit Slab is an A1 class, non-combustible fire resistant rock mineral wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Rocksilk RS45 is a high efficiency insulation slab with a certified l..
50mm Black Tissue Faced Knauf Rocksilk RS45 Insulation Slab A1
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
50mm RS45 Black Tissue Faced 2 Sides Slab consists of a rock mineral wool based core faced on the both sides with puncture resistant black tissue, used for structural elements such as roofs, concrete car park soffits and similar applications.
The black tissue facings on two sides helps to avoid t..
50mm Black Tissue Faced 2 Sides Knauf RS45 Insulation Slab
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
50mm White Tissue Faced One Side Rocksilk RS45 Slab is an acoustic rock mineral wool class A1 insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The white tissue facing on one side helps to avoid the slab edges from showing as shadows ..
White Tissue Faced Knauf RS45 Insulation Slab 50x600x1200mm
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
50mm White Tissue Faced 2 Sides Rocksilk RS45 Slab is an acoustic rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs and concrete car park soffits.
Rocksilk RS45 50mm is a standard density (45kg/m3) insulation slab with a certified therma..
50mm White Tissue Faced 2 Sides Knauf RS45 Insulation Slab
From 30 up to 240 minutes fire protection (1200x600x50mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
White Tissue Faced 2 Sides Rockwool RW3 50mm is an insulation slab, a non-combustible stone wool board faced with white tissue on both sides, used as a fire resistant and thermal insulation for roofs and concrete car park soffits.
An unique white tissue facings on both sides helps to avoid the sl..
50mm Rockwool RW3 White Tissue Faced 2 Sides Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
50mm White Tissue Faced One Side Rockwool RW3 is an insulation slab, a non-combustible semi-rigid stone wool board faced with white tissue used as a fire resistant and thermal insulation for roofs and concrete car park soffits.
This special white tissue facing helps to avoid the slab edges from s..
50mm Rockwool RW3 White Tissue Faced 1 Side Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
50mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust medium density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Rockwool Insulatio..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
50mm White Tissue Faced 1 Side Rockwool RWA45 is an insulation slab, a non-combustible semi-rigid stone wool board faced with white tissue used as a fire resistant and thermal insulation for roofs and concrete car park soffits.
Rockwool RWA45 Insulation Slab 50x600x1200mm faced with white tissue ..
50mm Rockwool RWA45 White Tissue Faced One Side Slab x1
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
White Tissue Faced 2 Sides Rockwool RWA45 50mm is an insulation slab, a non-combustible stone wool board faced with white tissue both sides, used as a fire resistant and thermal insulation for roofs and concrete car park soffits.
50mm RWA45 White Tissue Faced Two Sides Slab is a standard density ..
50mm Rockwool RWA45 White Tissue Faced Two Sides Slab x2
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
50mm Rockwool RWA45 Standard 45kg/m3 Insulation Slab is a robust, non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using Acoustic RWA45 Insulation in ceilings, walls and fl..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
5mm x 100mm Isocheck Acoustic Isolation Strip, a cross linked Isopoli foam with a self adhesive layer backing allows easier installation of the strip to be held in position as the sound insulation work progresses.
Isolation Strip is used for upgrades when looking to increase impact sound insulati..
5mm x 100mm Isocheck Acoustic Isolation Strip for Joists and Studs
Made from a cross linked Isopoli foam and a self adhesive layer backing
Increase impact sound insulation and reduce structure-borne noise
Self Adhesive Isolation Strip for easy application to the studs or joists
Noise reduction system used for partition/separating walls and floors
60mm Black Foil Faced Rocksilk Knauf RS60 Slab is an insulation slab reinforced with an aluminium black foil facing to one side with the highest possible A1 fire rating.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that..
60mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
60mm Black Foil Faced Two Sides Knauf RS60 Slab is a non-combustible rock mineral wool black foil backed on both sides insulation slab with an excellent class A1 fire performance.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy speciall..
60mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
60mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil insulation slab provide..
60mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 60mm aluminium foil insu..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
60mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
60mm RS60 Black Tissue Faced 2 Sides A1 Slab consists of a rock mineral wool core faced on the both sides with puncture resistant black tissue, used for structural elements such as roofs, concrete car park soffits and similar applications.
Knauf RS60 Slab (60mm x 600mm x 1200mm) faced with black ..
60mm Black Tissue Faced 1 Side Insulation Slab Knauf RS60 is a rock mineral wool based fire and acoustic insulation slab faced with black tissue on one side, used for roofs, concrete car park soffits and similar applications.
Knauf Rocksilk RS60 is a medium density (60kg/m3) insulation slab with ..
Black Tissue Faced Knauf Rocksilk RS60 Insulation Slab (60mm)
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
60mm Terrawool TW50 Sound Insulation Slab is a standard density (50kg/m3) non-combustible thermal and acoustic stone wool insulation slab used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab is a high-performance recyclable and dur..
75mm Rockwool RW5 Black Tissue Faced Slab is a thermal, fire and acoustic insulation slab particularly suited for providing fire resistance and thermal insulation through concrete car park soffits and similar applications.
Rockwool RW5 Insulation Slab 75mm x 600mm x 1200mm with black tissue on 1 ..
75x600x1200mm Rockwool RW5 Black Tissue Faced Slab A1
Formerly ProRox® SL960 Thermal conductivity of 0.034W/mK
Used for structural elements such as concrete car park soffits
A1 class, non-combustible fire resistant stone wool insulation slab
Provides from 30 minutes up to 240 minutes fire protection
75mm Black Tissue Faced 2 Sides Soffit Slab RW5 is a fire, thermal and acoustic insulation slab particularly suited for providing fire resistance and thermal insulation through concrete car park soffits and similar applications.
Black Tissue Faced Both Sides 75mm Rockwool RW5 (Formerly ProRox® SL..
75mm Foil Faced Two Sides Rockwool RW5 Insulation Slab is a rigid aluminium foil faced on both sides stone wool 100kg density insulation slab used to prevent the spread of flames and inhibit heat through concealed spaces in buildings.
Double Sided Foil Faced Fire Barrier Slab RW5 Rockwool 75x600x..
75mm Double Sided Foil Faced Fire Slab Rockwool RW5
100kg density - Foil Faced on Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
75mm Foil Backed Rockwool RW5 Insulation Slab is a rigid resin bonded foil faced fire and acoustic high density insulation slab used to prevent the spread of flames, heat, smoke and fire through concealed spaces in buildings.
Rockwool RW5 Foil Backed Slab is an A1 class, non-combustible aluminium..
75mm Foil Faced 1 Side Insulation Slab Rockwool RW5
100kg density - Foil Faced on One Side Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
75mm Knauf Rocksilk® RS140 Insulation Slab is a unique non-combustible mineral wool slab manufactured using Knauf bio-based binder ECOSE Technology with the best possible class A1 reaction to fire.
RS140 Rocksilk is manufactured with a density of 140kg/m3, designed for use in a variety of applica..
75mm x 600mm x 1200mm Knauf Rocksilk RS140 (140kg/m3)
Class A1 Non-combustible Rigid Rock Mineral Wool Insulation Slab
Fire, thermal and acoustic insulation slab used for building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceiling, timber & steel frame
75mm Rockwool RW5 White Tissue Faced 2 Sides Insulation Slab is an A1 non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
This special white tissue facings on both sides helps to av..
Rockwool RW5 White Tissue Faced 2 Sides Insulation Slab 75mm
Robust A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 100kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
75mm Rockwool RW5 Acoustic, Thermal and Fire Insulation Slab (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant acoustic insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using ..
RW5 is rated Euroclass A1 non-combustible
Excellent thermal, Acoustic (100kg density) and fire performance
75mm URSA Acoustic Insulation Roll is an A1 non-combustible unfaced glass mineral wool sound insulation roll, offering high level of sound absorption and noise reduction in timber or metal framed partition walls, separating walls and floors.
URSA APR Acoustic Roll 75mm is a cost effective way of ..
Rockwool RW5 White Tissue Faced 1 Side Insulation Slab 75mm is a robust A1 class non-combustible fire resistant resin bonded insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The white tissue facing on one side helps to avoid the slab..
75mm White Tissue Faced 1 Side Rockwool RW5 Insulation Slab
High-density 100kg/m3 and an excellent sound absorbing qualities
Provides from 30 minutes up to 240 minutes fire protection
Certified thermal conductivity (lambda value) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
90mm Knauf Rocksilk Flexible Insulation Slab is an easy to install rock mineral wool insulation slab used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Flexible Slab has been tested to provide 60 minutes ..
CT1 Silicone Adhesive and Sealant (Colour Black) 290ml is a multi-purpose silicone based sealant and adhesive that can be used to seal: solid wall insulation, render-only systems, baths, showers, roofs, doors, windows, and gutters.
Black colour silicone sealant and adhesive is an easy to apply pr..
Foil Faced 2 Sides Fire Slab Rockwool RWA45 50mm is a high quality aluminium foil faced on both sides stone wool fire slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RWA45 Foil Faced Two Sides Fire Barrier Slab 50mm x 600mm..
Foil Faced 2 Sides Fire Slab Rockwool RWA45 50mm
Aluminium Foil Faced Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
Isocheck Isobar 26mm x 78mm x 1800mm is a resilient bar made from galvanised steel used to provide superior noise control in ceilings, floors and walls.
Sound reduction system Isocheck Isobar and Isoblock is designed to offer a more robust alternative to a standard resilient bar with similar low ..
Isocheck Isobar (26mm deep x 78mm wide x 1800mm long)
Isobar resilient bar designed for ceilings, floors and walls
Used to provide superior noise control (sound reduction system)
Vibration absorbing steel channel which is secured to studs and joists
Isolation solution to construct separating and partition walls and ceilings
60mm White Tissue Faced Two Sides Knauf RS60 Insulation Slab is a rigid A1 class, non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Rocksilk RS60 is a medium density (60kg/m3) insulation slab with a certified thermal c..