Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
BASE TRACK | STARTER TRACK | BASE RAIL | BASE PLATE | STARTER PROFILE
BASE TRACK | STARTER TRACK | BASE RAIL | BASE PLATE | STARTER PROFILE
Base Track also called starter track, baserail or base plate, is a perforated moulding starting tray, resistant to corrosion and atmospheric factors used in thermal insulation systems as a cover for the lower part of the thermal insulation material of EPS polystyrene or mineral wool against mechanical damage and against penetration into the insulation of rodents. In fact, the tracks are used to perform a starting point just above damp proof cause (DPC) to hold the insulation boards and fix drip beads to ensure water flows away in the correct manner.
It also prevents penetration of cold air between the wall and the insulating boards and forms a barrier for rodents and insects, which can nest in the insulation. The track must be ideally leveled, otherwise the error will be increasing as we move up with the next boards. Starter tracks should be installed horizontally against a flat surface, with any gaps filled with expanding foam. This trim is an essential part of most EWI systems and it is easy to spot a job that hasn't used a starter track. Aluminium moulded profiles are mechanically fixed to the substrate and should be of similar width to that of the EPS board. The type of fixing used to secure the base track differs depending on the substrate usually at 300mm maximum centres. Connectors are used to attach lengths together. For uneven substrates use spacers to bridge the gaps to provide a solid fixing. For solid walls, hammer screw fixing, 6 x 35mm are usually sufficient.
TYPES OF BASE TRACK
The starter track comes in either Aluminium, Stainless steel and Galvanised steel. While the aluminum version is the cheapest option available offering 100% resistance to corrosion, galvanised surface finish track is a middle price profile, much less expensive than stainless steel. All of the box shaped profiles come in thicknesses of insulating panels 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm, 120mm, 130mm, 140mm, 150mm, 160mm, 170mm, 180mm, 190mm, 200mm, 210mm, 220mm, 230mm, 240mm and 250mm. While uPVC base tracks come in 2m length, Wemico® aluminium base track profiles come in 2500mm length.
UPVC BASE TRACK
uPVC Starter Track is mainly used for insulation thickness of 50-90mm, 100-160mm or 170mm-240mm depending on the track depth selected. It comes in 2m long pieces.
VENTED BASE TRACK
Building Regulations demand different air flow rates within the cavity of Timber Frame structures. Vented tracks have been introduced to overcome this issue with the addition of slots at the rear of the profile sections at different centres to deliver the different airflow rates that are required. Ventilation rate per 2500mm length is 1837.675mm2 and 735.07mm2 per 1000mm. Building Regulations also demand different air flow rates within the cavity of Steel Frame structures. In this case: 2500mm length is 382.85mm2 and 153.141mm2 per 1000mm.
FLEXIBLE BASE TRACK
Flexible (Flexi) Slotted Base Track is a resistant to corrosion and atmospheric factors flexi base trim designed for curved walls in EWI (external wall insulation) systems and thin coat rendering. Flexible rail is made of a self-hardening aluminium alloy with magnesium and silicon additives. It is distinguished by its excellent formability and high corrosion resistance. To install a crinkle crankle flexi profile, slit the rear mounting leg and then bend the profile around the curvature of the walls.
HEAVY DUTY BASE TRACK
Heavy Duty Base Track is 1.2mm thick, high quality solution where both the strength of steel and corrosion resistance are required to meet the strict recommendations of insulated render systems manufacturers.
BASE RAIL WITH PVC NOSING DRIP BEAD
Track with PVC nosing-drip bead is designed to water to drip down. Without a drip, the rain water can pool and cause damp problems in external wall insulation system.
STARTER TRACK INSTALLATION
Before starting the external wall insulation works, the height of the plinth should be determined and it should be marked with a horizontal line. The track should be installed at a height of approximately 350-400mm from the ground level. Then trim should be fastened to the base with an expansion plug, using at least 10 fixings per 2500mm length. The batten should always be fastened in the first and last holes. The end of the base rail at the wall corners, where two profiles connect, should be cut at an angle of 45 degrees. Track must be installed perfectly horizontally to facilitate the correct installation of the thermal insulation boards. Any deviation from the horizontal will result in gaps between the insulation boards.
140mm Heavy Duty Base Track with PVC Drip Bead 2500mm is a durable full system starter profile for External Wall Insulation and thin coat rendering made from PPC Galvanised Steel.
Full System Starter Profile with drip bead 140mm is used in insulated render systems as a cover for the lower part of..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
140mm Heavy Duty Base Track with PVC Nosing-Drip Bead is a professional full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems as a cover..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
150mm Aluminium Flexible (Flexi) Slotted Base Track is a resistant to corrosion and atmospheric factors flexi trim designed for curved walls in EWI (external wall insulation) systems and thin coat rendering.
To install a crinkle crankle profile, slit the rear mounting leg and then bend the profil..
150mm Stainless Steel Base Track is a top-class resistant to corrosion and staining, low maintenance stainless steel profile designed for external wall insulation systems and thin coat rendering.
Starter Track Stainless Steel 150mm is used in EWI systems as a cover for the lower part of the therm..
140mm Aluminium Base Track is a high-quality resistant to corrosion and atmospheric factors baserail profile designed for external wall insulation systems and thin coat rendering.
Base Bead is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polysty..
140mm Aluminium Vented Base Track TF is a high-quality resistant to corrosion and atmospheric factors ventilated profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 140mm thick thermal insulation boards: Expanded Polystyrene (EPS), Kings..
140mm Aluminium Vented Base Track SF is a high quality resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
Ventilated Base Track 140mm is used in insulated render systems as a cover for the lower part of the..
150mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
It is used in insulated render systems as a cover for the lower part of the ther..
150mm Heavy Duty Base Track with PVC Drip Bead 2500mm is a full system starter profile specially designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
Galvanised Steel Full System Starter Profile with drip bead 150mm is used in insulated render system..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
150mm Heavy Duty Base Track with PVC Nosing-Drip Bead is a professional full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems as a cover..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
160mm Aluminium Flexible (Flexi) Slotted Base Track is a resistant to corrosion and atmospheric factors flexi trim designed for curved walls in EWI (external wall insulation) systems and thin coat rendering.
To install a crinkle crankle profile, slit the rear mounting leg and then bend the profil..
160mm Stainless Steel Base Track is a top-class resistant to corrosion and staining, low maintenance stainless steel profile designed for external wall insulation systems and thin coat rendering.
Starter Track Stainless Steel 160mm is used in EWI systems as a cover for the lower part of the therm..
150mm Aluminium Base Track is a high-quality resistant to corrosion and atmospheric factors baserail profile designed for external wall insulation systems and thin coat rendering.
Base Bead is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polysty..
150mm Aluminium Vented Base Track Timbde Frame is a high-quality resistant to corrosion and atmospheric factors ventilated profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 150mm thick thermal insulation boards against mechanical damag..
150mm Aluminium Vented Base Track SF is a special resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
Ventilated Base Track 150mm is used in insulated render systems as a cover for the lower part of the 150m..
160mm Heavy Duty Galvanised Steel Base Track with PVC Drip Bead 2500mm is a special full system starter profile specially designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
Full System Starter Profile with drip bead 160mm is used in insulated rende..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
160mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
It is used in insulated render systems as a cover for the lower part of the ther..
160mm Heavy Duty Base Track with PVC Drip Bead is a professional full system starter profile specially designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
Stainless Steel Full System Starter Profile wi..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
170mm Aluminium Flexible (Flexi) Slotted Base Track is a resistant to corrosion and atmospheric factors flexi trim designed for curved walls in EWI (external wall insulation) systems and thin coat rendering.
To install a crinkle crankle profile, slit the rear mounting leg and then bend the profil..
170mm Stainless Steel Base Track is a top-class resistant to corrosion and staining, low maintenance stainless steel profile designed for external wall insulation systems and thin coat rendering.
Starter Track Stainless Steel 170mm is used in EWI systems as a cover for the lower part of the therm..
160mm Aluminium Base Track is a high-quality resistant to corrosion and atmospheric factors baserail profile designed for external wall insulation systems and thin coat rendering.
Base Bead is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polysty..
160mm Aluminium Vented Base Track TF is a high-quality resistant to corrosion and atmospheric factors ventilated profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 160mm thick thermal insulation boards against mechanical damage and pest..
160mm Aluminium Vented Base Track SF is a special resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
Ventilated Base Track 160mm is used in insulated render systems as a cover for the lower part of the 160m..
170mm Heavy Duty Base Track with PVC Drip Bead 2500mm is a special full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
Full System Starter Profile 170mm is used in insulated render systems as a cover for the lower part of..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
170mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
It is used in insulated render systems as a cover for the lower part of the ther..
170mm Heavy Duty Base Track with PVC Nosing-Drip Bead is a professional full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems as a cover..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
180mm Aluminium Flexible (Flexi) Slotted Base Track is a resistant to corrosion and atmospheric factors flexi trim designed for curved walls in EWI (external wall insulation) systems and thin coat rendering.
To install a crinkle crankle profile, slit the rear mounting leg and then bend the profil..
180mm Stainless Steel Base Track is a top-class resistant to corrosion and staining, low maintenance stainless steel profile designed for external wall insulation systems and thin coat rendering.
Starter Track Stainless Steel 180mm is used in EWI systems as a cover for the lower part of the therm..
170mm Aluminium Base Track is a high-quality resistant to corrosion and atmospheric factors baserail profile designed for external wall insulation systems and thin coat rendering.
Base Bead is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polysty..
170mm Aluminium Vented Base Track TF is a high-quality resistant to corrosion and atmospheric factors ventilated profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 170mm thick thermal insulation boards against mechanical damage and pest..
170mm Aluminium Vented Base Track SF is a special resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
Ventilated Base Track 170mm is used in insulated render systems as a cover for the lower part of the 170m..
180mm Heavy Duty Base Track with PVC Drip Bead 2500mm is a full system starter profile specially designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
HD Base Rail with drip 180mm is used in insulated render systems as a cover for the lower part of th..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
180mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
It is used in insulated render systems as a cover for the lower part of the ther..
180mm Heavy Duty Base Track with PVC Nosing-Drip Bead is a professional full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems as a cover..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
190mm Aluminium Flexible (Flexi) Slotted Base Track is a resistant to corrosion and atmospheric factors flexi trim designed for curved walls in EWI (external wall insulation) systems and thin coat rendering.
To install a crinkle crankle profile, slit the rear mounting leg and then bend the profil..
190mm Stainless Steel Base Track is a top-class resistant to corrosion and staining, low maintenance stainless steel profile designed for external wall insulation systems and thin coat rendering.
Starter Track Stainless Steel 190mm is used in EWI systems as a cover for the lower part of the therm..
180mm Aluminium Base Track is a high-quality resistant to corrosion and atmospheric factors baserail profile designed for external wall insulation systems and thin coat rendering.
Base Bead is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polysty..
180mm Aluminium Vented Base Track TF is a high-quality resistant to corrosion and atmospheric factors ventilated profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 180mm thick thermal insulation boards against mechanical damage and pest..
180mm Aluminium Vented Base Track SF is a special resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
Ventilated Base Track 180mm is used in insulated render systems as a cover for the lower part of the 180m..
190mm Heavy Duty Base Track with PVC Drip Bead 2500mm is a full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
It is used in insulated render systems as a cover for the lower part of the thermal insulation boards (Expande..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
190mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
It is used in insulated render systems as a cover for the lower part of the ther..
Stainless Steel Heavy Duty Base Track with PVC Nosing / Drip Bead 190mm is a professional full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
190mm Full System Starter Profi..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
200mm Aluminium Flexible (Flexi) Slotted Base Track is a resistant to corrosion and atmospheric factors flexi / slotted trim designed for curved walls in EWI (external wall insulation) systems and thin coat rendering.
To install a crinkle crankle flexi profile, slit the rear mounting leg and then..
200mm Stainless Steel Base Track is a top-class resistant to corrosion and staining, low maintenance stainless steel bottom profile designed for external wall insulation systems and thin coat rendering.
Starter Track Stainless Steel 200mm is used in EWI systems as a cover for the lower part of th..
190mm Aluminium Base Track is a high-quality resistant to corrosion and atmospheric factors baserail profile designed for external wall insulation systems and thin coat rendering.
Base Bead is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polysty..
190mm Aluminium Vented Base Track SF is a special resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
Ventilated Base Track 190mm is used in insulated render systems as a cover for the lower part of the 190m..
190mm Aluminium Vented Base Track TF is a high-quality resistant to corrosion and atmospheric factors ventilated profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 190mm thick thermal insulation boards against mechanical damage and pest..
200mm Heavy Duty Base Track with PVC Drip Bead 2500mm is a full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
It is used in insulated render systems as a cover for the lower part of the thermal insulation boards (Expande..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
200mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
It is used in insulated render systems as a cover for the lower part of the ther..
200mm Heavy Duty Base Track with PVC Nosing-Drip Bead is a professional full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems as a cover..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
200mm Aluminium Base Track is a high-quality resistant to corrosion and atmospheric factors base rail profile designed for external wall insulation systems and thin coat rendering.
Base Bead is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polyst..
200mm Aluminium Vented Base Track SF is a high quality resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
It is used in insulated render systems as a cover for the lower part of the 200mm thick thermal insu..
200mm Aluminium Vented Base Track TF is a high-quality resistant to corrosion and atmospheric factors profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 200mm thick thermal insulation boards: Expanded Polystyrene (EPS), Kingspan K5 or M..
210mm Heavy Duty Base Track with PVC Drip Bead 2500mm is a full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
It is used in insulated render systems as a cover for the lower part of the thermal insulation boards (Expande..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
210mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
It is used in insulated render systems as a cover for the lower part of the ther..
210mm Heavy Duty Base Track with PVC Nosing-Drip Bead is a professional full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems as a cover..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
210mm Aluminium Base Track is an ultimate resistant to corrosion and atmospheric factors premium base rail profile designed for external wall insulation systems and thin coat rendering.
Base Bead is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded P..
210mm width and 2500mm long Premium Aluminium Starter Profile
Used in EWI systems as a cover for the lower part of the thermal insulation
Designed for External Wall Insulation Systems and Thin Coat Rendering
Aluminium plain mill finish box shaped bead designed for various thicknesses
Aluminium Base Track - Premium Resistant to corrosion and atmospheric factors
210mm Aluminium Vented Base Track SF is a high quality resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
It is used in insulated render systems as a cover for the lower part of the 210mm thick thermal insu..
210mm Aluminium Vented Base Track TF is a high-quality resistant to corrosion and atmospheric factors ventilated profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 210mm thick thermal insulation boards: Expanded Polystyrene (EPS), Kings..
220mm Heavy Duty Base Track with PVC Drip Bead 2500mm is a full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
It is used in insulated render systems as a cover for the lower part of the thermal insulation boards (Expande..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
220mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
It is used in insulated render systems as a cover for the lower part of the ther..
220mm Heavy Duty Base Track with PVC Nosing-Drip Bead is a professional full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems as a cover..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
220mm Aluminium Base Track is an ultimate resistant to corrosion and atmospheric factors premium base rail profile designed for external wall insulation systems and thin coat rendering.
Base Bead is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded P..
220mm width and 2500mm long Premium Aluminium Starter Profile
Used in EWI systems as a cover for the lower part of the thermal insulation
Designed for External Wall Insulation Systems and Thin Coat Rendering
Aluminium plain mill finish box shaped bead designed for various thicknesses
Aluminium Base Track - Premium Resistant to corrosion and atmospheric factors
220mm Aluminium Vented Base Track SF is a high quality resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
It is used in insulated render systems as a cover for the lower part of the 220mm thick thermal insu..
220mm Aluminium Vented Base Track TF is a high-quality resistant to corrosion and atmospheric factors profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 220mm thick thermal insulation boards: Expanded Polystyrene (EPS), Kingspan K5 or M..
230mm Heavy Duty Base Track with PVC Drip Bead 2500mm is a full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
It is used in insulated render systems as a cover for the lower part of the thermal insulation boards (Expande..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
230mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
It is used in insulated render systems as a cover for the lower part of the ther..
230mm Heavy Duty Base Track with PVC Nosing-Drip Bead is a professional full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems as a cover..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
230mm Aluminium Base Track for External Wall Insulation UK projects is a premium starter profile designed for external wall insulation systems and thin coat rendering.
Base Rail is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polystyrene (EPS), ..
230mm width and 2500mm long Premium Aluminium Starter Profile
Used in EWI systems as a cover for the lower part of the thermal insulation
Designed for External Wall Insulation Systems and Thin Coat Rendering
Aluminium plain mill finish box shaped bead designed for various thicknesses
Aluminium Base Track - Premium Resistant to corrosion and atmospheric factors
230mm Aluminium Vented Base Track SF is a high quality resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
It is used in insulated render systems as a cover for the lower part of the 230mm thick thermal insu..
230mm Aluminium Vented Base Track TF is a high-quality resistant to corrosion and atmospheric factors profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 230mm thick thermal insulation boards: Expanded Polystyrene (EPS), Kingspan K5 or M..
240mm Heavy Duty Base Track with PVC Drip Bead 2500mm is a full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from PPC Galvanised Steel.
It is used in insulated render systems as a cover for the lower part of the thermal insulation boards (Expande..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
240mm Heavy Duty Base Track PPC is a starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
It is used in insulated render systems as a cover for the lower part of the ther..
240mm Heavy Duty Base Track with PVC Nosing-Drip Bead is a professional full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems as a cover..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
240mm Aluminium Base Track for UK External Wall Insulation projects is a premium starter profile used for external wall insulation systems and thin coat rendering.
Base Rail is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polystyrene (EPS), King..
240mm width and 2500mm long Premium Aluminium Starter Profile
Used in EWI systems as a cover for the lower part of the thermal insulation
Designed for External Wall Insulation Systems and Thin Coat Rendering
Aluminium plain mill finish box shaped bead designed for various thicknesses
Aluminium Base Track - Premium Resistant to corrosion and atmospheric factors
240mm Aluminium Vented Base Track SF is a high quality resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
It is used in insulated render systems as a cover for the lower part of the 240mm thick thermal insu..
240mm Aluminium Vented Base Track TF is a high-quality resistant to corrosion and atmospheric factors profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 240mm thick thermal insulation boards: Expanded Polystyrene (EPS), Kingspan K5 or M..
250mm Galvanised Steel Heavy Duty Base Track with PVC Nosing 2500mm is a special full system starter profile specially designed for External Wall Insulation Systems and thin coat rendering made from premium PPC Galvanised Steel.
Full System Starter Profile with drip bead 250mm is used in insulate..
BASE PROFILE - PPC GALVANISED - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
250mm Heavy Duty Galvanised Steel Base Track PPC is a special starter profile for External Wall Insulation (EWI) systems and thin coat rendering made from polyester powder coated Galvanised Steel which is less expensive than stainless steel.
It is used in insulated render systems as a cover for t..
250mm Heavy Duty Base Track with PVC Nosing-Drip Bead is a professional full system starter profile designed for External Wall Insulation (EWI) and thin coat rendering made from resistant to corrosion and staining, low maintenance stainless steel.
It is used in insulated render systems as a cover..
Premium Stainless Steel - PVC NOSE
FULL SYSTEM HEAVY DUTY BASE BEAD with Nose
Base Track - Base Rail - Starter Profile - Drip bead
External Wall Insulation Systems - Stainless Steel
Provides additional protection against Abrasion and Corrosion
250mm Premium Aluminium Base Track is a perforated resistant to corrosion and atmospheric factors starter profile used for external wall insulation systems and thin coat rendering.
Base Rail is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polyst..
250mm width and 2500mm long Premium Aluminium Starter Profile
Used in EWI systems as a cover for the lower part of the thermal insulation
Designed for External Wall Insulation Systems and Thin Coat Rendering
Aluminium plain mill finish box shaped bead designed for various thicknesses
Aluminium Base Track - Premium Resistant to corrosion and atmospheric factors
250mm Aluminium Vented Base Track SF is a high quality resistant to corrosion and weather conditions ventilated profile designed for External Wall Insulation (EWI) systems and thin coat rendering.
It is used in insulated render systems as a cover for the lower part of the 250mm thick thermal insu..
250mm Aluminium Vented Base Track TF is a high-quality resistant to corrosion and atmospheric factors profile designed for external wall insulation systems and thin coat rendering as a cover for the lower part of the 250mm thick thermal insulation boards: Expanded Polystyrene (EPS), Kingspan K5 or M..
260mm Premium Aluminium Base Track is an ultimate resistant to corrosion and atmospheric factors starter profile used for external wall insulation systems and thin coat rendering.
Base Rail is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polysty..
260mm width and 2500mm long Premium Aluminium Starter Profile
Used in EWI systems as a cover for the lower part of the thermal insulation
Designed for External Wall Insulation Systems and Thin Coat Rendering
Aluminium plain mill finish box shaped bead designed for various thicknesses
Aluminium Base Track - Premium Resistant to corrosion and atmospheric factors
270mm Premium Aluminium Base Track is an ultimate resistant to corrosion and atmospheric factors starter profile used for external wall insulation systems and thin coat rendering.
Base Rail is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polysty..
270mm width and 2500mm long Premium Aluminium Starter Profile
Used in EWI systems as a cover for the lower part of the thermal insulation
Designed for External Wall Insulation Systems and Thin Coat Rendering
Aluminium plain mill finish box shaped bead designed for various thicknesses
Aluminium Base Track - Premium Resistant to corrosion and atmospheric factors
280mm Premium Aluminium Base Track is an ultimate resistant to corrosion and atmospheric factors starter profile used for external wall insulation systems and thin coat rendering.
Base Rail is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polysty..
280mm width and 2500mm long Premium Aluminium Starter Profile
Used in EWI systems as a cover for the lower part of the thermal insulation
Designed for External Wall Insulation Systems and Thin Coat Rendering
Aluminium plain mill finish box shaped bead designed for various thicknesses
Aluminium Base Track - Premium Resistant to corrosion and atmospheric factors
290mm Premium Aluminium Base Track is an ultimate resistant to corrosion and atmospheric factors starter profile used for external wall insulation systems and thin coat rendering.
Base Rail is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polysty..
290mm width and 2500mm long Premium Aluminium Starter Profile
Used in EWI systems as a cover for the lower part of the thermal insulation
Designed for External Wall Insulation Systems and Thin Coat Rendering
Aluminium plain mill finish box shaped bead designed for various thicknesses
Aluminium Base Track - Premium Resistant to corrosion and atmospheric factors
300mm Aluminium Base Track for External Wall Insulation UK Projects is a premium resistant to corrosion and atmospheric factors box shaped perforated starter tray.
Base Rail is used in EWI systems as a cover for the lower part of the thermal insulation material of Expanded Polystyrene (EPS), King..
300mm width and 2500mm long Premium Aluminium Starter Profile
Used in EWI systems as a cover for the lower part of the thermal insulation
Designed for External Wall Insulation Systems and Thin Coat Rendering
Aluminium plain mill finish box shaped bead designed for various thicknesses
Aluminium Base Track - Premium Resistant to corrosion and atmospheric factors