Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
225mm Anti Heave Board Cordek Cellcore HX S Under Slab 18/24 is used beneath reinforced concrete floor slabs to protect against the effects of ground heave by reducing the upward force transmitted to the structure.
The HX S EPS Grade 18/24 is calculated and calibrated for concrete thickness up to..
28mm Isofoam (diameter 25mm) is a piling and debonding foam sleeve manufactured from polyethylene used to prevent the concrete adhering to the reinforcing bars and for insulating heating and plumbing pipes.
ISO Foam has low thermal conductivity of 0.036W/mK at 0 °C therefore its reduces the loss ..
28mm Isofoam (diameter 25mm) 2000mm length
Piling and Debonding Foam Polyethylene Sleeve
Used also for insulating heating and plumbing pipes
Used to prevent the concrete adhering to the reinforcing bars
Sound absorbing properties, reducing pop and flow noises in pipes
30mm Fire Insulation Board Promat MONOLUX 800 (MST 800) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 800 High Performance Fire Board 30mm is a tough and durable..
Monolux 800 - providing up to 240 minutes Fire Resistance
MST-800 - 1000°C - Easy to Decorate with Paints, Wallpapers or Tiles
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
Promat Promatect-MST 30mm is a fire resistant insulation board specifically formulated without asbestos and mineral fibres used as a thermal break in process plants and as single skin insulation in ovens and dryers.
30mm Fire Protection Board Promatect-MST is an effective and stable fire insulati..
30mm Promat PROMATECT®-MST A1 Fire Resistant Board
Stable fire insulation solution for demanding applications
High strength even when exposed to high temperature of 1000ºC
Fire insulation board with up to 240min fire resistance (protection)
Insulation in ovens and dryers, Heat shield, Structural thermal break
31.8mm Promat MONOLUX 500 Fire Board (MST 500) is a special low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 500 High Performance Board 31.8mm is a tough and durable, resistant..
Easy to Decorate with Paints, Wallpapers or Tiles
Monolux 500 - providing up to 240 minutes Fire Resistance
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
39mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
40mm Promat PROMATECT-L500 (Fire Protection Board) is a special non-combustible low density calcium silicate fire insulation board, used for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
Promat L500 PROMATECT 40mm i..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
Cordek Heaveguard 600x600x220mm Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against up..
600x600x85mm Cordek Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against upl..
80mm XO/FB Xtratherm Xtroliner PIR Framing Board is an improved performance polyisocyanurate insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB framing ..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
Cordek Cellcore HX B Under Beam 18/24 is a 85mm thick lightweight expanded polystyrene board designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
Cellcore HX B Grade 18/24 is calculated and calibrated for concrete thick..
90mm Cordek Cellcore HX S Under Slab 18/24 is a lightweight expanded polystyrene (EPS) block designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
Grade 18/24 i..
155x600x2400mm HX B Under Beam Grade 18-24 is used beneath reinforced concrete ground beams and pile caps, an unique hollow construction polystyrene block with moulded legs.
Cellcore HX B Grade 18-24 is fully tested, calculated and calibrated for concrete thickness up to 660mm to protect ground b..
155mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 18-24 max. concrete depth up to 660mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
HX B Under Beam 85mm x 2400mm x 600mm Grade 18-24 is an ultimate moisture resistant hollow construction EPS used beneath reinforced concrete ground beams and pile caps.
Cellcore HX B Grade 18-24 is fully tested, calculated and calibrated for concrete thickness up to 660mm to protect ground beams ..
85mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 18-24 for concrete thickness up to 660mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
Filcor 70 Cordek is a lightweight structural fill material used as a void former for forming openings and voids within concrete structures in Hard and Soft Landscaping, Podium Slabs, Swimming Pools, Steps, ramps and shapes.
Cordek Filcor Grade 70 is calculated and calibrated for concrete thicknes..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
Damp Proof Course 225mm DPC 500mu 2000 gauge (30m roll) is a classic 225mm wide damp proofing barrier that is used to prevent rising damp, moving water up a walls and associated problems.
225mm DPC provides damp proof protection, preventing ingress of external moisture and stopping damp rising up..
225mm Damp Proof Course DPC 500mu (30m roll)
Prevent rising damp, moving water up a walls
Suitable for brick, block, stone or concrete walls
Can be used for vertical and horizontal applications
Polypropylene Beam Form 2500x600x7mm is an ideal solution that requires less excavation than other formwork methods, a cost effective method of constructing on site concrete ground beams and pile caps.
7mm Polypropylene Beam Form Sheet is lightweight and can be shaped by scoring and bending to fo..
7mm Polypropylene Beam Form Sheet - 2500mm x 600mm Boards
Groundform Sheet Permanent Shuttering, Beamform, Shuttering Systems
Using Beam Form requires less excavation than other formwork methods
Effective method of constructing on site concrete ground beams and pile caps
Can be shaped by scoring and bending to form any ground beams on the pile cap profile
100mm Xtratherm Xtroliner Framing Board XO/FB is an improved performance PIR (polyisocyanurate) insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB frami..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
126mm Xtratherm Xtroliner XO/STP Soffit Plus is a 2 in 1 insulation product which provides an effective thermal and fire performance solution in structural ceiling applications in commercial and residential buildings that can be fixed directly to the concrete slab, onto battens or used with propriet..
155mm Cordek Cellcore HX B Under Beam EPS Block 24/32 is a special board designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
HX B (Concrete Piled Ground Beams Board) Grade 24/32 is calculated and calibrated for concret..
155mm x 600mm x 800mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against u..
155mm Cordek Cellcore HX B for Ground Beams Grade 24-32 is a non-collapsible EPS void former board used beneath reinforced concrete ground beams and pile caps.
Cellcore HX B Grade 24-32 is fully tested, calculated and calibrated for concrete thickness up to 900mm to protect ground beams against t..
155mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 24-32 max. concrete depth up to 900mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
15mm Promat PROMATECT-H Calcium Silicate Insulation Board is an asbestos free, non-combustible matrix engineered mineral fireboard reinforced with selected fibres and fillers that does not contain formaldehyde.
Fire Board Promatect-H 15mm can be used as a fire protection of steel and concrete str..
15mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
160mm Cellcore HX S Under Slab 24/32 is a lightweight board designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
Grade 24/32 is calculated and calibrated for c..
205mm Cellvent HX Grade 7/10 used to limit the pressure exerted on in-situ reinforced suspended concrete floors or piled ground beams by expansion of clay soils (clay heave) or ground recovery.
Cellvent HX is available in a range of specifications and can be used in conjunction with gas membranes..
205mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 7/10 Maximum Concrete Depth 220mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
220mm Cordek Cellcore HX B Under Beam (Concrete Ground Beams Protection Board) 24/32 is designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
HX B (Ground Heave Solution) Grade 24/32 is calculated and calibrated for conc..
225mm Cellcore HX S Under Slab 24/32 is designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
Grade 24/32 is calculated and calibrated for concrete thickness up..
300mm DPC Damp Proof Course 500mu (2000 gauge) 30m roll is a 300mm wide damp proofing barrier that is used to prevent rising damp, moving water up a walls and associated problems.
DPC provides damp proof protection, preventing ingress of external moisture and stopping damp rising up the walls.
..
300mm Damp Proof Course DPC 500mu (30m roll)
Prevent rising damp, moving water up a walls
Suitable for brick, block, stone or concrete walls
Can be used for vertical and horizontal applications
300mm Cordek Heaveguard Protection Against Ground Heave is a lightweight, compressible-fill expanded polystyrene (EPS) material designed to protect foundations against effects of ground heave, typically on the inside face of piled ground beams or deep trench fill foundations.
Cordek Heaveguard 30..
Clay Heave Protection
Board coverage: 2.88m2
Soil heave potential: Medium
BBA Agrement Certificate No. 17/5448
Low density compressible expanded polystyrene (EPS)
35mm Isofoam (diameter 32mm) is a closed cell foam sleeve manufactured from polyethylene used to prevent the concrete adhering to the reinforcing bars and for insulating heating and plumbing pipes.
ISO Foam has low thermal conductivity of 0.036W/mK at 0 °C therefore its reduces the loss of heat f..
35mm Isofoam (diameter 32mm) 2000mm length
Piling and Debonding Foam Polyethylene Sleeve
Used also for insulating heating and plumbing pipes
Used to prevent the concrete adhering to the reinforcing bars
Sound absorbing properties, reducing pop and flow noises in pipes
38.1mm MONOLUX 500 Promat Fire Protection Board (MST 500) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 500 High Performance Fire Board 38.1mm is a tough and dur..
Easy to Decorate with Paints, Wallpapers or Tiles
Monolux 500 - providing up to 240 minutes Fire Resistance
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
40mm Promat PROMATECT-MST Fire Protection Board is a high-performance class A1, non-combustible insulation board used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST is an effective and stable fire insulation solution for..
40mm Promat PROMATECT®-MST A1 Fire Resistant Board
Stable fire insulation solution for demanding applications
High strength even when exposed to high temperature of 1000ºC
Fire insulation board with up to 240min fire resistance (protection)
Insulation in ovens and dryers, Heat shield, Structural thermal break
44mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
50mm Monolux 800 Fire Protection Board Promat (MST 800) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 800 High Performance Board 50mm is a special, tough and dur..
Monolux 800 - providing up to 240 minutes Fire Resistance
MST-800 - 1000°C - Easy to Decorate with Paints, Wallpapers or Tiles
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
50mm PROMATECT L500 Fire Protection Board is a versatile non-combustible low density calcium silicate fire rated board, used for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
Promat L500 PROMATECT 50mm is off white ..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
85mm Cordek Cellcore HX B Under Beam 24/32 is an expanded polystyrene block designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
Cellcore HX B Grade 24/32 is calculated and calibrated for concrete thickness up to 900mm (..
85mm HX B for Reinforced Concrete Ground Beams Grade 24-32 is a non-collapsible Cordek void former EPS board used beneath reinforced concrete ground beams and pile caps.
Cellcore HX B Grade 24-32 is fully tested, calculated and calibrated for concrete thickness up to 900mm to protect ground beams..
85mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 24-32 for concrete thickness up to 900mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
85mm x 600mm x 800mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against up..
90mm Cellcore HX S Under Slab Grade 24/32 is an EPS board designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
HX S Grade 24/32 is calculated and calibrated fo..
90mm Cordek Cellcore HX S Under Slab EPS 24/32
HX S Grade 24/32 - Maximum Concrete Depth 900mm
Designed for use beneath reinforced concrete floor slabs
Protection against the potential effects of ground heave
Ground Heave Solutions - Cellcore HX S Under Slab EPS
30x30mm POLYBAR+ (Blue) Standard is a self-expanding sealing bar used for sealing construction joints, an revolutionary alternative to bentonite waterstops.
BLUE POLYBAR Plus when fully enclosed in a concrete structure will remain effective as waterstops, for the life of the structure in which is..
30x30mm POLYBAR+ (Blue) alternative to bentonite waterstops
Revolutionary product used for sealing construction joints
Resistant to water pressure with impressive expansion capacity
Great adhesion to well compacted, clean and dry concrete
Effective barrier to the passage of moisture from the ground
220mm x 600mm x 2400mm Cellcore HX B Under Beam 24-32 is a special hollow core construction EPS block used beneath reinforced concrete ground beams and pile caps.
Cordek Cellcore HX B Grade 24-32 is calculated and calibrated for concrete thickness up to 900mm to protect ground beams against the e..
220mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 24-32 max. concrete depth up to 900mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
Filcor 90 EPS Cordek (EPS) is a lightweight structural fill material used as a void former solution for forming openings and voids within concrete structures in Hard Landscaping, Soft Landscaping, Podium Slabs, Swimming Pools, Steps, ramps and shapes.
Cordek Filcor Grade 90 is calculated and cali..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
Heaveguard Pile Collars 220mm x 600mm x 800mm are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against u..
200mm Claymaster consists of low density expanded polystyrene which can be used when foundations need to be protected against ground heave and to prevent potential problems in foundations due to moisture movement in soils.
Claymaster Jablite is also called clay heave protection board, a moisture ..
200mm Jablite Claymaster Expanded Polystyrene Board (8' x 4')
Compressible-fill EPS used to protect foundations against lateral heave
Used on inside face of piled ground beams or deep trench fill foundations
155mm x 700mm x 700mm Cordek Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles ag..
120mm Xtratherm Xtroliner PIR Framing Board XO/FB is a premium polyisocyanurate insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB framing board can be ..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
155mm Cellcore HX B Under Beam EPS Block 32/42 is a ground beam protection board designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
HX B Under Beam for Concrete Piled Ground Beams Grade 32/42 is calculated and calibra..
155mm Cordek Cellcore HX B Under Beam EPS 32/42
155mm HX B Grade 32/42 - Max. Concrete Depth 1220mm
Provides protection against the potential effects of ground heave
Cordek HX B Under Beam (Grade 32-42) is a 155mm thick, 600mm wide and 2400mm long hollow core EPS block used beneath reinforced concrete ground beams and pile caps.
Cellcore HX B Grade 32-42 is fully tested, calculated and calibrated for concrete thickness up to 1220mm to protect ground beams aga..
155mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 32-42 max. concrete depth up to 1220mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
205mm Cellvent HX Grade 9/13, an expanded polystyrene (EPS) cellular void former, for use in limiting the pressure exerted on in-situ reinforced suspended concrete floors or piled ground beams.
Cellvent HX is available in a range of specifications and can be used in conjunction with gas membranes..
205mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 9/13 Maximum Concrete Depth 300mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
20mm PROMATECT-H Structural Calcium Silicate Board is a rigid non-combustible fire protection matrix engineered fire-board reinforced with selected fibres and fillers that does not contain formaldehyde and asbestos.
Fire Board Promatect-H 20mm can be used as a fire protection of steel and concret..
20mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
Claymaster 300mm Pink Board is the original compressible fill expanded polystyrene material used to protect foundations against lateral heave, typically on the inside face of piled ground beams or deep trench fill foundations.
Shrinkable clays are soils containing a large proportion of mineral pa..
300mm Jablite Claymaster Expanded Polystyrene Board (8' x 4')
Compressible-fill EPS used to protect foundations against lateral heave
Used on inside face of piled ground beams or deep trench fill foundations
337mm Damp Proof Course 500mu – 2000 gauge is a 337mm wide, 30m long damp proofing barrier that is used to prevent rising damp, moving water up a walls and associated problems.
The Damp proof course is very important in construction because any excess of moisture entering a building can lead to m..
337mm Damp Proof Course DPC 500mu (30m roll)
Prevent rising damp, moving water up a walls
Suitable for brick, block, stone or concrete walls
Can be used for vertical and horizontal applications
42mm Piling Foam (diameter 40mm) is a 2m long closed cell isofoam tube manufactured from polyethylene to prevent the concrete adhering to the reinforcing bars and for insulating heating and plumbing pipes.
ISO Foam has low thermal conductivity of 0.036W/mK at 0 °C therefore its reduces the loss o..
42mm Isofoam (diameter 40mm) 2000mm length
Piling and Debonding Foam Polyethylene Sleeve
Used also for insulating heating and plumbing pipes
Used to prevent the concrete adhering to the reinforcing bars
Sound absorbing properties, reducing pop and flow noises in pipes
49mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
50.8mm Promat MONOLUX 500 Fire Protection Board (MST 500) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 500 Board is a high performance tough and durable, resist..
Easy to Decorate with Paints, Wallpapers or Tiles
Monolux 500 up to 240 minutes Fire Resistance
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals
Ducts and Services Protection, Fire Door, Single Skin Partitions
PROMATECT-MST PROMAT Fire Resistant Board is a 50mm x 1200mm x 2500mm non-combustible class A1 rigid machinable insulation board used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST is an effective and stable fire insulat..
50mm Promat PROMATECT®-MST A1 Fire Resistant Board
Stable fire insulation solution for demanding applications
High strength even when exposed to high temperature of 1000ºC
Fire insulation board with up to 240min fire resistance (protection)
Insulation in ovens and dryers, Heat shield, Structural thermal break
Promat PROMATECT L500 Fire Protection Board 60mm is a versatile non-combustible low density calcium silicate fire insulation board, used for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
60mm Promat L500 PROMATECT i..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
700x700x220mm Cordek Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against up..
700x700x85mm Cordek Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against upl..
90mm Cellcore HX S Under Slab (32/42) is designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
Cordek HX S Grade 32/42 is calculated and calibrated for concrete..
90mm Cordek Cellcore HX S Under Slab EPS 32/42
HX S Grade 32/42 - Maximum Concrete Depth 1220mm
Designed for use beneath reinforced concrete floor slabs
Protection against the potential effects of ground heave
Ground Heave Solutions - Cellcore HX S Under Slab EPS
HX B Under Beam 2400x600x85mm Grade 32-42, an unique polystyrene based board with hollow core and moulded legs used beneath reinforced concrete ground beams and pile caps.
Cellcore HX B Grade 32-42 is fully tested, calculated and calibrated for concrete thickness up to 1220mm to protect ground be..
85mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 32-42 for concrete thickness up to 1220mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
Cordek Cellcore HX S Under Slab 160mm (Grade 32/42) is designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
The Cordek Cellcore HX S Under Slab EPS is a compre..
160mm Cordek Cellcore HX S Under Slab EPS 32/42
HX S Grade 32/42 - Maximum Concrete Depth 1220mm
Designed for use beneath reinforced concrete floor slabs
Protection against the potential effects of ground heave
Ground Heave Solutions - Cellcore HX S Under Slab EPS
Cellcore HX S Under Slab 32/42 is a 225mm thick EPS sheet designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
Cordek Cellcore HX S Grade 32/42 is calculated a..
225mm Cordek Cellcore HX S Under Slab EPS 32/42
225mm HX S Grade 32/42 Max. Concrete Depth 1220mm
Ground Heave Solutions - Cellcore HX S Under Slab EPS
Designed for use beneath reinforced concrete floor slabs
Protection against the potential effects of ground heave
220mm thick Cordek Cellcore HX B Under Beam 32-42 is a non-collapsible 600mm wide void former board used beneath reinforced concrete ground beams and pile caps.
Cordek Cellcore HX B Grade 32-42 is calculated and calibrated for concrete thickness up to 1220mm to protect ground beams against the ef..
220mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 32-42 max. concrete depth up to 1220mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
Cordek Cellcore HX B Under Beam 32/42 is a 85mm thick EPS block designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
Cellcore HX B Grade 32/42 is calculated and calibrated for concrete thickness up to 1220mm (Tested to a..
85mm Cordek Cellcore HX B Under Beam EPS 32/42
85mm HX B Grade 32/42 - Max. Concrete Depth 1220mm
Cordek Cellcore HX B Under Beam 220mm (Foundation Protection Board) 32/42 is specially designed eps block for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
HX B Under Beam (Ground Heave Solution) Grade 32/42 is calculated and ..
Used beneath reinforced concrete ground beams and pile caps
220mm Cordek Cellcore HX B Under Beam EPS 32/42
Provides protection against the potential effects of ground heave
220mm HX B Grade 32/42 - Max. Concrete Depth 1220mm
Filcor 100 Cordek EPS (Expanded Polystyrene) is a lightweight structural fill material used as a void former solution for forming openings and voids within concrete structures.
Cordek Filcor Grade 100 is calculated and calibrated for concrete thickness up to 4000mm (has been tested to achieve the..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
50x5mm POLYBAR+ (Blue) Standard Version Concrete Joint Sealer is an alternative to bentonite waterstops that can be used for sealing construction joints.
BLUE POLYBAR Plus when fully enclosed in a concrete structure will remain effective as waterstops, for the life of the structure in which is in..
50x5mm POLYBAR+ (Blue) alternative to bentonite waterstops
Revolutionary product used for sealing construction joints
Resistant to water pressure with impressive expansion capacity
Great adhesion to well compacted, clean and dry concrete
Effective barrier to the passage of moisture from the ground
100x5mm POLYBAR+ (Blue) is a thermoplastic synthetic rubber based alternative to bentonite waterstops that can be used for sealing construction joints.
BLUE Polybar Plus when fully enclosed in a concrete structure will remain effective as waterstops, for the life of the structure in which is inco..
100x5mm POLYBAR+ (Blue) alternative to bentonite waterstops
Revolutionary product used for sealing construction joints
Resistant to water pressure with impressive expansion capacity
Great adhesion to well compacted, clean and dry concrete
Effective barrier to the passage of moisture from the ground
155x800x800mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene (EPS) products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against upl..
205mm Cellvent HX Grade 13/18 is a cellular expanded polystyrene void former, used to limit the pressure exerted on in-situ reinforced suspended concrete floors or piled ground beams.
Cellvent HX is available in a range of specifications and can be used in conjunction with gas membranes, vent out..
205mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 13/18 Maximum Concrete Depth 460mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
220mm x 800mm x 800mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against u..
450mm Damp Proof Course 500mu DPC (2000 gauge) is a standard 450mm wide, 30m long damp proofing barrier that is used to prevent rising damp, moving water up a walls and associated problems.
The Damp proof course (DPC) is very important in construction because any excess of moisture entering a bui..
450mm Damp Proof Course DPC 500mu (30m roll)
Prevent rising damp, moving water up a walls
Suitable for brick, block, stone or concrete walls
Can be used for vertical and horizontal applications
48mm (diameter 45mm) Debonding Foam called ISOFoam is a polyethylene based closed cell sleeve, used to debond the reinforcement from the concrete and for insulating heating and plumbing pipes.
ISO Foam has low thermal conductivity of 0.036W/mK at 0 °C therefore its reduces the loss of heat from d..
48mm Isofoam (diameter 45mm) 2000mm length
Piling and Debonding Foam Polyethylene Sleeve
Used also for insulating heating and plumbing pipes
Used to prevent the concrete adhering to the reinforcing bars
Sound absorbing properties, reducing pop and flow noises in pipes
54mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
60mm Promat PROMATECT®-MST (Passive Fire Protection Board) is a strong and durable specifically formulated fire insulation board used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST is an effective and stable fire insulat..
60mm Promat PROMATECT®-MST A1 Fire Resistant Board
Stable fire insulation solution for demanding applications
High strength even when exposed to high temperature of 1000ºC
Fire insulation board with up to 240min fire resistance (protection)
Insulation in ovens and dryers, Heat shield, Structural thermal break
85mm x 800mm x 800mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against up..
Filcor 120 Cordek EPS (Expanded Polystyrene) is a lightweight structural fill material used as a void former solution for forming openings and voids within concrete structures in Hard Landscaping, Soft Landscaping, Podium Slabs, Swimming Pools, Steps, ramps and shapes.
Cordek Filcor Grade 120 is ..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
22mm Promat Promatect-H Calcium Silicate Fire Board is a fire protective non-combustible matrix engineered mineral insulation board reinforced with selected fibres and fillers that does not contain formaldehyde.
Fire Board Promatect-H 22mm can be used as a fire protection of steel and concrete st..
22mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
SDS Tool is a drill bit adapter designed for battering Staifix Insofast ISF18A Drywall and Insulated Plasterboard Fixings powered by a standard light SDS hammer drill (1-2kg with 2-3 joules).
ISF18A drill bit adapter is suitable for all lengths of Staifix Insofast Insulated Plasterboard Fixings:..
SDS Tool
Drill Bit Adapter
ISF-18A fixing tool
The fixings are driven-in by the adaptor powered by a standard light SDS hammer drill
205mm Cellvent HX Grade 18/24 is designed for use under suitably reinforced ground floor slabs where subsidence is not expected, combining the benefits of the Cellcore HX range with Ventform.
Cellvent HX is available in a range of specifications and can be used in conjunction with gas membranes, ..
205mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 18/24 Maximum Concrete Depth 660mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
25mm PROMATECT-H Fireproof Insulation Board is a highly-durable calcium-silicate matrix engineered mineral fire protection board reinforced with selected fibres and fillers that does not contain formaldehyde.
Fire Board Promatect-H 25mm can be used as a fire protection of steel and concrete struc..
25mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
54mm ISO Piling and Debonding Foam is a 50mm diameter foam sleeve manufactured from polyethylene used to prevent the concrete adhering to the reinforcing bars and for insulating heating and plumbing pipes.
ISO Foam has low thermal conductivity of 0.036W/mK at 0 °C therefore its reduces the loss o..
54mm Isofoam (diameter 50mm) 2000mm length
Piling and Debonding Foam Polyethylene Sleeve
Used also for insulating heating and plumbing pipes
Used to prevent the concrete adhering to the reinforcing bars
Sound absorbing properties, reducing pop and flow noises in pipes
59mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
Damp Proof Course 600mm (DPC – 500mu) is a high-quality 600mm wide, 30m long damp proofing barrier that is used to prevent rising damp, moving water up a walls and associated problems.
The Damp proof course (DPC – 2000 gauge) is very important in construction because any excess of moisture enteri..
600mm Damp Proof Course DPC 500mu (30m roll)
Prevent rising damp, moving water up a walls
Suitable for brick, block, stone or concrete walls
Can be used for vertical and horizontal applications
85mm x 900mm x 1200mm Heaveguard EPS Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles again..
Claymaster Pile Collar 220mm x 900mm x 1200mm is a compressible low density Expanded Polystyrene product, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against u..
Filcor 140 Cordek EPS (Expanded Polystyrene) is a lightweight structural fill material used as a void former solution for forming openings and voids within concrete structures in Hard Landscaping, Soft Landscaping, Podium Slabs, Swimming Pools, Steps, ramps and shapes.
Cordek Filcor Grade 140 is ..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
155mm x 900mm x 1200mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against ..
220x1200x1200mm Heaveguard Pile Collars are compressible low density Expanded Polystyrene (EPS) products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against u..
270mm Cellcore Cellvent HX Grade 7/10 combines the benefits of the Cellcore HX range with Ventform to alleviate the effects of ground heave whilst also providing an excellent gas venting.
Cordek EPS Void Former Formwork Cellvent HX 270x1200x2400mm is designed for use under suitably reinforced gro..
270mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 7/10 Maximum Concrete Depth 220mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
69mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
85x1200x1200mm Claymaster Pile Collar is a compressible low density Expanded Polystyrene (EPS) product, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against upl..
Filcor 160 Cordek EPS (Expanded Polystyrene) is a lightweight structural fill material used as a void former solution for forming openings and voids within concrete structures in Hard Landscaping, Soft Landscaping, Podium Slabs, Swimming Pools, Steps, ramps and shapes.
Cordek Filcor Grade 160 is ..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
Pile Collar 1200x1200x155mm Claymaster (Heaveguard) is a compressible low density Expanded Polystyrene (EPS) product, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard pil..
270mm Cellvent HX Grade 9/13 is a robust void former made of Cellcore HX range with Ventform to alleviate the effects of ground heave whilst also providing an excellent gas venting.
Cordek EPS Void Former Formwork Cellvent HX 270x1200x2400mm is designed for use under suitably reinforced ground fl..
270mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 9/13 Maximum Concrete Depth 300mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
74mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
Filcor 190 Cordek is a lightweight structural fill expanded polystyrene (EPS) used as a void former solution for forming openings and voids within concrete structures.
Cordek Filcor Grade 190 is calculated and calibrated for concrete thickness up to 7600mm (has been tested to achieve the specifie..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
270mm Cordek EPS Void Former Cellvent HX Grade 13/18 is used beneath reinforced concrete floor slabs to provide a combined ground heave protection and passive gas venting system.
Cordek EPS Void Former Formwork Cellvent HX 270x1200x2400mm is designed for use under suitably reinforced ground floor..
270mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 13/18 Maximum Concrete Depth 460mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
79mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
270mm Cellvent HX Grade 18/24, consists of a moulded hexagonal EPS compressible base with Ventform to provide a combined ground heave protection and passive gas venting system.
Cordek EPS Void Former Formwork Cellvent HX 270x1200x2400mm is designed for use under suitably reinforced ground floor s..
270mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 18/24 Maximum Concrete Depth 660mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
84mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
89mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
99mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
109mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocya..
119mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocya..
129mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocya..
139mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocya..
149mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocya..
159mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocya..
174mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocya..