Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Metal frame wall insulation is nothing but a lightweight, fireproof partition wall covered on the inner or outer face of the studs with highly effective insulation such as Rockwool RWA45, RW3, RW5, Knauf RS45, RS60 or RS100. It is primarily used in partition walls or as components in steel frame systems (SFS). In fact, metal stud wall insulation can improve fire safety and sound blocking between spaces in the same property. The majority of commercial buildings use metal stud and track as part of its framing system. Metal stud internal walls offer significantly greater long-term benefits to a building than timber walls. Unlike wood, metal is a material which is not prone to warping or rotting, nor is it vulnerable to mould growth. As a material, metal’s strength doesn’t deteriorate the longer it is used, meaning a building will have efficient, long-term structural integrity. These durable metal wall studs can be used to replace the traditional timber framing, making them both convenient and cost effective. Steel may be a strong, durable framing material, but it’s also a thermal conductor. When not properly insulated, steel allows heat - and associated energy - to travel through the frame. This makes steel buildings particularly susceptible to high energy costs, as well as cold spots and difficulty maintaining temperatures. Insulating the frame and particularly over the frame as well as between the joints stops thermal transfer. This makes the building more comfortable and energy efficient for the occupants. Therefore, it is insulated inside or outside in 90% of cases. Fiberglass batts are the most common type of insulation used in metal stud framing. They're easy to install and relatively inexpensive. A partition insulation such as RWA45 Rockwool Acoustic Insulation Slab or Celotex or Kingspan solid rigid boards are also used for this type of construction. It should be emphasized that these are usually high-density products that guarantee soundproofing (>45kg/m3). It is recommended to use 60kg/m³ slabs as they offer the best sound insulation for the money spent. Although, those slabs still have higher density than other forms of insulation unlike thermal insulation which is lower in density and supplied in rolls. Unlike rolls, slabs are normally for walls. However, these high density insulation may weigh more than 100kg/m3. For instance, an average square office measuring 16'x 16' may call for 5.2m3 of acoustic insulation, therefore an extra weight of 520kg (half a ton). This may be worth considering when few offices are built on a single storey. Therefore, the most commonly used material for insulating interior walls is light mineral wool. It comes in the form of roll measuring usually 10000mm x 600mm, offering high level of sound absorption, noise reduction, better thermal and fire performance in internal wall partitions. Rolls are rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. The absence of air gaps is crucial to achieving a high level of performance in the relevant application. Acoustic partition rolls adapt to any slight imperfections in the substrate and knit together, eliminating any air gaps (thermal bridging). In fact, roll is particularly effective at preventing the hollow sound that can occur in partitions with unfilled cavities.
METAL FRAME INSULATION SIZES
The spacing of the structure is strictly related to the dimensions of the gypsum board, i.e. 1200x2400. Generally speaking, studs should be placed at every 400 or 600mm. However, the industry standard of metal frame centre spacing is 600mm. Possibly for the reasons you should be looking for insulation with this particular width. However other 400mm centre spacing is also used in the UK. The only advantage for 400mm is a stronger structure otherwise is it better to have 600 mm centres.
600mm, more insulation, less thermal bridging, less metal studs, 600mm - living spaces and bedrooms
400mm, less insulation, more thermal bridging, stronger structure, 400mm - utility, kitchen or bathrooms
Rockwool RWA, RW, Knauf RS or Terrawool TW range offer boards size 1200mm x 600mm, which makes them ideal for insulation of this type of structure. On the other hand rigid insulation boards such as Celotex, Xtratherm or Kingspan come standard size 2400mm x 1200mm. They can be easily cut to 2 x 600mm or 3 x 400mm widths to fit between studs. These high performance PIR insulation boards are designed for internal wall insulation applications and can help achieve excellent U-values with both sides faced with low emissivity composite foil facing. Either way, installing insulation boards will provide excellent thermal performance and appropriate fire resistance within the wall cavity.
FITTING METAL FRAME INSULATION
Start at the bottom and gently place the insulation between the metal studs. Work up the front of the insulation toward the top. Confirm that the insulation completely fills the cavity between studs. If installing paper or foil-faced insulation, make sure the facing is toward the interior of the home. Cut the insulation with the utility knife when installing around utility lines, plumbing or any kind of cabling, if necessary. Cut the insulation boards accurately to ensure they will fit tightly around openings such as window and door openings. Fit the insulation boards to the external face of the steel studs, butted tightly together to ensure a continuous layer of insulation, ensuring vertical board joints coincide with a vertical steelwork member. Make sure the insulation sits between the obstruction and fill any gaps between the insulation and the metal framing with expanding polyurethane foam to avoid thermal bridging issues. Repeat the process to completely install all the insulation between the metal studs.
METAL FRAME WALL INSULATION PRICES
If you are looking to insulate a 100mm thick stud wall, you should expect to pay anything from £3.46 to £40 per m2. While fibreglass insulation is the cheapest available option costing a little as £3.46 per m2, it does not perform as good as Knauf RS or Rockwool RW range. For instance 100mm Knauf RS45 (45kg/m3) cost as of 2022 £11.46 per m2. On the other hand, its highest density grade (100kg/m3) cost £20.24. If you are about insulate a partition wall on the outer face of the studs, using 52.5mm thick insulated plasterboard such as Kingspan Kooltherm K118 or Xtratherm XT/TL-MF you would be paying as of 2022 £29.91 per m2. Filling steel stud wall with Celotex PIR rigid insulation board would cost not more than £18.55 per m2. The costs given here are given in good faith as an indicative guide only and should be used with understanding. Insulationgo Limited cannot accept any liability for any budget produced using these figures.
35mm VERMICULUX-S Promat Fire Protection Board is a moisture resistant, A1 non-combustible board which provides up to 240 minutes fire protection for buildings storing high value items or assets, including museums and data centres.
VERMICULUX-S is used to protect one, two, three or four sided enc..
40mm Promat PROMATECT-L500 (Fire Protection Board) is a special non-combustible low density calcium silicate fire insulation board, used for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
Promat L500 PROMATECT 40mm i..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
42.5mm (43mm) XT/TL-FR is a fire resistant insulated plasterboard made of 30mm PIR insulation bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single ..
42.5mm (30mm) XT/TL-FR Fire Resistant Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
42.5mm (43mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 30mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal..
42.5mm Xtratherm XT/TL-MR Moisture Resistant Insulated Plasterboard is a rigid PIR insulation foam core bonded to 12.5mm green moisture resistant plasterboard designed for internal building areas of high humidity conditions.
XT/TL-MR Thermal Liner Thin-R is designed to improve moisture resistance..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
50mm Black Foil Faced Knauf RS45 is a fire-resistant thermal and acoustic insulation slab specially designed for concrete soffits, an A1 class non-combustible rock mineral wool.
Knauf RS45 1200mm x 600mm x 50mm black foil backed slab provides outstanding fire, thermal and acoustic performance for..
50mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
50mm Black Foil Faced 2 Sided Knauf RS45 is a fire, thermal and acoustic insulation slab specially designed for concrete soffits, an A1 class non-combustible rock mineral wool.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new..
50mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
50mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 50mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
50mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 50mm aluminium fo..
50mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 50mm foil backed slab pr..
50mm Foil Faced on Both Sides Rocksilk RS100 Knauf Fire Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil-faced two-sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200 x 600 x 50mm alumi..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations Euroclass A1
Density 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible material
Provides excellent fire, thermal and acoustic performance.
PROMASIL-1000L 50mm Fire Rated Insulation Board Promat is a mechanically strong and vibration proof fire insulation board with very good thermal properties and thermal stability up to 1000°C, used in the fireplace systems.
Promat PROMASIL-1000L Boards are often used in heavy industry for anode ba..
PROMASIL-1100 SUPER 50mm Fire Insulation Board is used in the fireplaces and stoves construction, a strong and vibration proof fire insulation board with very good thermal properties and thermal stability up to 1050°C.
50mm Promat PROMASIL-1100 SUPER Boards are suitable for multiple uses in singl..
50mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C
Fireplaces, Wood Burning Stoves, PROMAFOUR® fireplace systems
Very good thermal properties and thermal stability up to 1050°C
Extra low thermal conductivity calcium-silicate fire insulation board
Multiple uses in single layer systems for penetration seals in walls and slabs
50mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) non-combustible rock mineral wool unfaced rigid slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
50mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material designed for use in multiple applications..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
50mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust medium density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Rockwool Insulatio..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
50mm Rockwool RWA45 Standard 45kg/m3 Insulation Slab is a robust, non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using Acoustic RWA45 Insulation in ceilings, walls and fl..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
60mm Black Foil Faced Rocksilk Knauf RS60 Slab is an insulation slab reinforced with an aluminium black foil facing to one side with the highest possible A1 fire rating.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that..
60mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
60mm Black Foil Faced Two Sides Knauf RS60 Slab is a non-combustible rock mineral wool black foil backed on both sides insulation slab with an excellent class A1 fire performance.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy speciall..
60mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
60mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil insulation slab provide..
60mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 60mm aluminium foil insu..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
60mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
IKO Enertherm ALU PIR Insulation Board 60mm is an easy to install rigid polyisocyanurate foam core insulation board clad on both sides with a multi-layer gas-tight aluminium foil, used on flat roofs, pitch roofs, loft floors, cavity walls, cladding and basements.
60mm IKO Enertherm ALU is a light..
60mm Terrawool TW50 Sound Insulation Slab is a standard density (50kg/m3) non-combustible thermal and acoustic stone wool insulation slab used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab is a high-performance recyclable and dur..
75mm Knauf Rocksilk® RS140 Insulation Slab is a unique non-combustible mineral wool slab manufactured using Knauf bio-based binder ECOSE Technology with the best possible class A1 reaction to fire.
RS140 Rocksilk is manufactured with a density of 140kg/m3, designed for use in a variety of applica..
75mm x 600mm x 1200mm Knauf Rocksilk RS140 (140kg/m3)
Class A1 Non-combustible Rigid Rock Mineral Wool Insulation Slab
Fire, thermal and acoustic insulation slab used for building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceiling, timber & steel frame
75mm Rockwool RW5 Acoustic, Thermal and Fire Insulation Slab (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant acoustic insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using ..
RW5 is rated Euroclass A1 non-combustible
Excellent thermal, Acoustic (100kg density) and fire performance
75mm URSA Acoustic Insulation Roll is an A1 non-combustible unfaced glass mineral wool sound insulation roll, offering high level of sound absorption and noise reduction in timber or metal framed partition walls, separating walls and floors.
URSA APR Acoustic Roll 75mm is a cost effective way of ..
BG Gyproc Thermaline PIR Insulated Plasterboard 78mm is a high performance insulated panel consists of a 12.5mm Gyproc WallBoard plasterboard bonded to a 65.5mm rigid PIR (polyisocyanurate) foam with a multi-layer kraft and aluminium foil facings on both sides.
78mm British Gypsum Gyproc Thermali..
78mm Gyproc ThermaLine PIR Insulated Plasterboard
Multi-layer kraft aluminium facings on both sides
For both refurbishment and new build projects
Simple and cost-effective 2 in 1 insulated plasterboard
Provides insulation and dry lining in one operation
78mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard is a high performance insulated panel consists of a 12.5mm Moisture Resistant plasterboard bonded to a 65.5mm rigid PIR foam core with an aluminium and water repellent kraft facings on both sides.
Moisture Resistant Insulated Pla..
British Gypsum Gyproc Thermaline PIR MR
78mm Moisture Resistant Insulated Plasterboard
Water repellent kraft facings on both sides
Improves moisture resistance and thermal performance
80mm Kingspan Kooltherm K112 Framing Board (pack of 4) is an insulation board with a fibre-free rigid thermoset phenolic core and certified thermal conductivity of 0.019 W/mK used for timber and steel framing systems.
Kingspan Kooltherm K112 Framing Board is one of the thinnest commonly used insu..
80mm Framing Board Xtratherm Safe-R SR/FB is a top-class rigid foam phenolic insulation board with a low emissivity foil facings designed for use with steel and timber frame applications up to 18m in height.
A high-performance BBA certified phenolic 2400mm x 1200mm square edge panel with an appro..
Suitable for use in Steel and Timber Frame Systems
Superior Lambda Value as low as 0.020W/mK
Provides excellent U-Values and improved thermal bridging detailing
Can be used between studs or as an insulated sheathing board
80mm Unilin SR/FB Framing Board is used in steel and timber frame applications, SR/FB can be also used between studs or as an insulated sheathing board in buildings up to 11m in height.
Safe-R SR/FB is manufactured to EN 13166 by Unilin Insulation with certified lambda (thermal conductivity) of 0..
80mm XO/FB Unilin Framing Board, a high performance PIR rigid insulation used in a wide range of constructions including steel or timber frame applications up to 11m in height.
XO/FB Framing Board used into the traditional cavity of the construction improves the value of the walls over the tradit..
80mm Unilin XO/FB Framing Board (Steel and Timber Frame Applications)
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
Used between studs or as an insulated sheathing in a wide range of constructions
Suitable for new build and refurbishment projects in buildings up to 11m in height
80mm Rainscreen Cladding Insulation Xtratherm Safe-R SR/RS is a high-class rigid phenolic insulation board with a low emissivity foil facings designed for ventilated rainscreen cladding applications in new build and refurbishment projects
Xtratherm SR/RS 2400mm x 1200mm x 80mm insulation boards a..
Lower Lambda values for improved U-Values
Superior Lambda Value as low as 0.020W/mK
BBA Certified - Certification Number 10/4803
Tested and Approved under BS 8414 and BR135
Euroclass B Fire Classification - Rainscreen Applications
80mm XO/FB Xtratherm Xtroliner PIR Framing Board is an improved performance polyisocyanurate insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB framing ..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
90mm Knauf Rocksilk Flexible Insulation Slab is an easy to install rock mineral wool insulation slab used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Flexible Slab has been tested to provide 60 minutes ..
Lead Lined Plywood Code 6 1200mm x 1200mm is a radiation shield, a plywood sheet covered with a thin layer of lead used to provide complete radiation (x-rays) protection and safety to walls, ceilings and floors in the healthcare industry.
X-Ray Resistant Plywood Panel (Code 6) consisting of 12mm ..
Code 6 Lead Lined Plywood X-ray Radiation Protection
Strong plywood sheet covered with a thin layer of lead
Used to provide complete X-rays protection and safety
1200mm x 1200mm - 1.44m2 (4′ x 4′) durable lead lining sheets
Dental Surgery, Veterinary Practice, Hospital, X-ray and Diagnostic rooms
Kingspan Kooltherm K118 Single Board is a 52.5mm thick premium performance insulated plasterboard for mechanically fixed and adhesively bonded (dot and dab) insulated drylining.
Kooltherm K118 range is a rigid phenolic thermoset insulation core with a certified thermal conductivity (lambda value)..
52.5mm Kingspan Kooltherm K118 Insulated Plasterboard (K18 and K17)
High-quality insulation material made of a rigid phenolic core and plasterboard
Premium performance, lower lambda for internal wall insulation projects
Unbeatable insulated plasterboard with no equivalent to K118 thermal performance
Premium performance insulation board - thermal conductivity of 0.019 W/mK
Code 6 Lead Lined Plywood (X-Ray Panel) is a radiation shielding, a durable plywood sheet covered with a thin layer of lead used to provide complete radiation (x-rays) protection and safety to walls, ceilings and floors in the healthcare industry.
X-Ray Resistant Plywood Panel (Code 6) consisting..
Code 6 Lead Lined Plywood X-ray Radiation Protection
Strong plywood sheet covered with a thin layer of lead
Used to provide complete X-rays protection and safety
Standard 2400mm x 1200mm (4′ x 8′) durable lead lining sheets
Dental Surgery, Veterinary Practice, Hospital, X-ray and Diagnostic rooms
Thermawall TW55 Kingspan PIR Insulation Board 40mm is a rigid thermoset foam insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Kingspan Thermawall TW55 is a high performance insulation sheet suitable for use with timber fram..
100mm Rock Mineral Wool Knauf RS140 is an unfaced insulation slab with the best possible Euroclass A1 reaction to fire classification designed for use in multiple applications where density is critical.
RS140 Rocksilk is manufactured with a density of 140kg/m3, designed for use in a variety of ap..
100mm x 600mm x 1200mm Knauf Rocksilk RS140 (140kg/m3)
Class A1 Non-combustible Rigid Rock Mineral Wool Insulation Slab
Fire, thermal and acoustic insulation slab used for building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceiling, timber & steel frame
100mm Knauf Rocksilk Flexible Insulation Slab is a multi-purpose rock mineral wool insulation slab used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Knauf Flexible 100mm is non-combustible flexi insulati..
100mm Rockwool RW5 Acoustic Insulation Slab (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant acoustic insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using Rockwool RW5 1200..
RW5 is fire rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance (100kg/m3)
100mm Framing Board Xtratherm Safe-R SR/FB is a top-class rigid foam phenolic insulation board with a low emissivity foil facings designed for use with steel and timber frame applications up to 18m in height.
A high-performance BBA certified phenolic 2400mm x 1200mm square edge panel with an appr..
Suitable for use in Steel and Timber Frame Systems
Superior Lambda Value as low as 0.020W/mK
Provides excellent U-Values and improved thermal bridging detailing
Can be used between studs or as an insulated sheathing board
100mm SR/FB Safe-R Unilin Framing Board is a superior performance rigid phenolic foam insulation board used in ventilated cladding, timber and steel framed systems up to 11m in height.
Safe-R SR/FB is manufactured to EN 13166 by Unilin Insulation with certified lambda (thermal conductivity) of 0...
100mm Rainscreen Cladding Insulation Xtratherm Safe-R SR/RS is a high-class rigid phenolic insulation board with a low emissivity foil facings designed for ventilated rainscreen cladding applications in new build and refurbishment projects.
Xtratherm SR/RS 2400mm x 1200mm x 100mm insulation board..
Lower Lambda values for improved U-Values
Superior Lambda Value as low as 0.020W/mK
BBA Certified - Certification Number 10/4803
Tested and Approved under BS 8414 and BR135
Euroclass B Fire Classification - Rainscreen Applications
100mm Unilin XO/FB Xtroliner is an insulating panel used between studs or as an insulated sheathing board in a wide range of constructions including steel or timber frame applications.
XO/FB Framing Board used into the traditional cavity of the construction improves the value of the walls over th..
100mm Unilin XO/FB Framing Board (Steel and Timber Frame Applications)
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
Used between studs or as an insulated sheathing in a wide range of constructions
Suitable for new build and refurbishment projects in buildings up to 11m in height
100mm APR URSA Acoustic Partition Insulation Roll Glasswool is a lightweight, non-combustible, unfaced glass mineral wool class A1 product used for sound insulation in between the wall, plasterboard, partition, ceiling or floor.
URSA ACOUSTIC ROLL 100mm is a cost effective way of insulating both ..
100mm Xtratherm Xtroliner Framing Board XO/FB is an improved performance PIR (polyisocyanurate) insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB frami..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
120mm Rockwool RW6 is an extremely dense insulation slab manufactured in density of 140kg/m3, an A1 class non-combustible stone wool insulation with an excellent fire and acoustic properties.
Rockwool RW6 Slab is specially designed stone wool (molten rock and minerals) insulation used in floors, ..
120mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
120mm Rockwool RW6 Foil Faced 1 Side Slab is an extremely dense reinforced aluminium foil backed insulation manufactured in density of 140kg/m3, an A1 class non-combustible stone wool insulation.
Rockwool RW6 Foil Faced x1 Side Slab 120x600x1200mm fire performance integrity is 240 minutes, and 60..
120x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
120mm Foil Faced Two Sides Slab Rockwool RW6 is an extremely dense (140kg/m3) faced with reinforced aluminium foil on both sides insulation slab, an A1 class non-combustible stone wool fire insulation.
Foil Faced Two Sides (FFx2) Rockwool RW6 120x600x1200mm fire performance integrity is 240 minut..
120mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
15mm Promat PROMATECT-H Calcium Silicate Insulation Board is an asbestos free, non-combustible matrix engineered mineral fireboard reinforced with selected fibres and fillers that does not contain formaldehyde.
Fire Board Promatect-H 15mm can be used as a fire protection of steel and concrete str..
15mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
18mm Versapanel Cement Bonded Particle Board Class 0 is an A2 cement building board offering exceptional strength, mechanical and acoustic performance compared with other exterior gypsum sheathing boards.
Euroform Versapanel A2 18mm is a special SFS sheathing board that can be used in a wide ran..
18mm Cement Bonded Particle Board CBPB
Versapanel A2, Class 0 Sheathing Building Board
Can be used in external and internal applications
Versatile Versapanel for residential and public applications
Exceptional strength, mechanical and acoustic performance
25mm PROMATECT® 250 Promat is a non-combustible mineral bound lightweight board, designed to provide a high degree of strength, dimensional stability and up to 150 minutes fire protection to structural steelwork and mezzanine floors.
Promat PROMATECT 250 is a 25mm thick, 2500mm long by 1200mm wid..
25mm Promat PROMATECT 250 Fire Protection Board
A1 non-combustible low density calcium-silicate insulation board
PROMATECT®-250 is made with special PROMAXON® technology
Used for protection of steel structures and mezzanine floors
Provides up to 150 minutes fire protection to structural steelwork
38.1mm MONOLUX 500 Promat Fire Protection Board (MST 500) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 500 High Performance Fire Board 38.1mm is a tough and dur..
Easy to Decorate with Paints, Wallpapers or Tiles
Monolux 500 - providing up to 240 minutes Fire Resistance
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
40mm Promat PROMATECT-MST Fire Protection Board is a high-performance class A1, non-combustible insulation board used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST is an effective and stable fire insulation solution for..
40mm Promat PROMATECT®-MST A1 Fire Resistant Board
Stable fire insulation solution for demanding applications
High strength even when exposed to high temperature of 1000ºC
Fire insulation board with up to 240min fire resistance (protection)
Insulation in ovens and dryers, Heat shield, Structural thermal break
40mm Promat VERMICULUX-S Calcium Silicate Fire Insulation Board is used where the fire protection system is in full view and where it is hidden, VERMICULUX-S provides up to 240 minutes fire protection to structural steel applications.
VERMICULUX-S is used to protect one, two, three or four sided ..
47.5mm (48mm) XT/TL-FR is an insulated plasterboard made of 35mm Unilin PIR insulation core bonded to 12.5mm fire plasterboard used in dry lining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single l..
47.5mm (35mm) XT/TL-FR Fire Resistant Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
47.5mm (48mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 35mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal..
Xtratherm XT/TL-MR Thermaliner Moisture Resistant is a 47.5mm insulated plasterboard combined of PIR insulation foam core bonded to 12.5mm green moisture resistant plasterboard designed for internal building areas of high humidity conditions.
XT/TL-MR Thermal Liner Thin-R is designed to improve m..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
50mm Kingspan Thermawall TW55 Insulation Sheet is used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Thermawall TW55 Kingspan PIR 2400mm x 1200mm x 50mm is a high performance insulation board suitable for use with timber frame and steel frame..
50mm Monolux 800 Fire Protection Board Promat (MST 800) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 800 High Performance Board 50mm is a special, tough and dur..
Monolux 800 - providing up to 240 minutes Fire Resistance
MST-800 - 1000°C - Easy to Decorate with Paints, Wallpapers or Tiles
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
50mm PROMATECT L500 Fire Protection Board is a versatile non-combustible low density calcium silicate fire rated board, used for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
Promat L500 PROMATECT 50mm is off white ..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
60mm Black Foil Faced Rocksilk Knauf RS45 Insulation Slab is made from non-combustible Euroclass A1 fire rated rock mineral wool insulation used mainly for concrete soffits.
Knauf RS45 1200mm x 600mm x 60mm black foil backed slab provides outstanding fire, thermal and acoustic performance for bot..
60mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
60mm Two Sides Black Foil Faced Rocksilk Knauf RS45 Insulation Slab is made from non-combustible class A1 fire rated rock mineral wool insulation used mainly for concrete soffits.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both ..
60mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
60mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 60mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
60mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 60mm foil backed slab pr..
60mm PROMASIL®-1000L Promat Fire Protection Board is an extremely low thermal conductivity, lightweight calcium-silicate insulation board with very good thermal stability up to 1000°C, used in various industrial applications.
PROMASIL-1000L Boards are often used in heavy industry for anode baking..
60mm PROMASIL-1100 SUPER Promat Fire Board is an extra low thermal conductivity calcium-silicate fire insulation board with very good thermal stability up to 1050°C, used in the fireplaces and wood burning stoves.
Fire Insulating Board PROMASIL®-1100 SUPER is the result of combining Promat PROMAX..
60mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C
Fireplaces, Wood Burning Stoves, PROMAFOUR® fireplace systems
Very good thermal properties and thermal stability up to 1050°C
Extra low thermal conductivity calcium-silicate fire insulation board
Multiple uses in single layer systems for penetration seals in walls and slabs
60mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material designed for use in multiple applications..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
60mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust, medium-density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Rockwool Insulati..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
60mm Rockwool RWA45 Acoustic Insulation Slab (Prorox SL920) is a robust, standard density (45kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using RWA45 Insulation ..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
IKO Enertherm ALU PIR Insulation Board 70mm is an easy to install rigid polyisocyanurate foam core insulation board clad on both sides with a multi-layer gas-tight aluminium foil, used on flat roofs, pitch roofs, loft floors, cavity walls, cladding and basements.
70mm IKO Enertherm ALU is a light..
70mm Terrawool TW50 Acoustic Insulation Slab (density of 50kg/m3) is a non-combustible thermal and acoustic stone wool insulation slab that is used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab 70mm is a high-performance recyclab..
75mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 75mm aluminum foi..
75mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil insulation slab provide..
75mm Foil Faced on Both Sides Rocksilk RS100 Knauf Fire Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil faced two sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 75mm a..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Provides excellent fire, thermal and acoustic performance.
75mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 75mm aluminium foil insu..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
75mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
75mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) rigid non-combustible rock mineral wool insulation slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-com..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
75mm RS60 Black Foil Backed and Faced Knauf Insulation Slab is an A1 class aluminium black foil faced on both sides rock mineral wool slab with the highest possible fire rating.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy specially ..
75mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
75mm RS60 Black Foil Backed Slab comprises a 60kg/m3 density non-combustible mineral wool insulation core faced with an aluminium foil in black colour on one side.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that refle..
75mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
93mm Gyproc Thermaline PIR MR British Gypsum Insulated Plasterboard is an insulated dry lining laminate consists of a 12.5mm Moisture Resistant plasterboard bonded to a 80.5mm PIR foam core with an aluminium and water repellent kraft facings on both sides of the insulation board.
BG Moisture Resi..
British Gypsum Gyproc Thermaline PIR MR
93mm Moisture Resistant Insulated Plasterboard
Water repellent kraft facings on both sides
Improves moisture resistance and thermal performance
93mm British Gypsum Gyproc Thermaline PIR Insulated Plasterboard is an insulated panel consists of a 12.5mm Gyproc WallBoard plasterboard bonded to a 80.5mm rigid PIR foam with a multi-layer kraft and aluminium foil facings on both sides.
Gyproc Thermaline PIR 93mm is a smart and cost-effective 2..
93mm Gyproc ThermaLine PIR Insulated Plasterboard
Multi-layer kraft aluminium facings on both sides
For both refurbishment and new build projects
Simple and cost-effective 2 in 1 insulated plasterboard
Provides insulation and dry lining in one operation
1200x1200mm Lead Lined Plywood (Code 7) is an x-ray resistant strong plywood sheet covered with a thin layer of lead used to provide complete radiation (x-ray) protection and safety to walls, ceilings and floors in the healthcare industry.
Code 7 X-Ray Resistant Plywood Panel consisting of 12mm p..
Code 7 Lead Lined Plywood X-ray Radiation Protection
Strong plywood sheet covered with a thin layer of lead
Used to provide complete X-rays protection and safety
1200mm x 1200mm - 1.44m2 (4′ x 4′) durable lead lining sheets
Dental Surgery, Veterinary Practice, Hospital, X-ray and Diagnostic rooms
Kingspan Kooltherm K118 57.5mm Single Board is a high-quality insulation board made of a rigid foam phenolic core with foil facings, bonded to 12.5mm tapered edge gypsum plasterboard.
Kooltherm K118 range is a rigid phenolic thermoset insulation core with a certified thermal conductivity (lambda ..
57.5mm Kingspan Kooltherm K118 Insulated Plasterboard (K18 and K17)
High-quality insulation material made of a rigid phenolic core and plasterboard
Premium performance, lower lambda for internal wall insulation projects
Unbeatable insulated plasterboard with no equivalent to K118 thermal performance
Premium performance insulation board - thermal conductivity of 0.019 W/mK
Kingspan Kooltherm K112 Framing Board 100mm (pack of 3) is an easy to handle insulation board with a fibre-free rigid thermoset phenolic core used for timber and steel framing systems.
100mm K112 Framing Board is one of the thinnest commonly used insulation for timber and steel frame walls, it al..
The 57.5mm Kooltherm K118 Insulated Plasterboard by Kingspan is an insulated plasterboard, a premium performance, lower lambda internal wall insulation with an advanced fibre-free rigid thermoset phenolic insulation core.
K118 Kingspan Kooltherm is a highly durable, premium performance thermal in..
57.5mm Kingspan Kooltherm K118 (previously K18 and K17)
Insulation, dry-lining and vapour control in one board
Easy to handle and install - Ideal for new build, retrofit and refurbishment
Standards & Approvals: ISO 9001 - ISO 14001 - BBA Certificate 16/5299
Premium performance insulated plasterboard thermal conductivity of 0.019 W/mK
Lead Lined Plywood Code 7 (X-Ray Protection Panel) is an x-ray shielding, a strong plywood sheet covered with a thin layer of lead used to provide complete radiation (x-ray) protection and safety to walls, ceilings and floors in the healthcare industry.
Code 7 X-Ray Resistant Plywood Panel consis..
Code 7 Lead Lined Plywood X-ray Radiation Protection
Strong plywood sheet covered with a thin layer of lead
Used to provide complete X-rays protection and safety
Standard 2400mm x 1200mm (4′ x 8′) durable lead lining sheets
Dental Surgery, Veterinary Practice, Hospital, X-ray and Diagnostic rooms
100mm Black Foil Faced RS60 Knauf A1 Slab is a specially designed used as a fire, thermal and acoustic concrete soffit insulation with an excellent fire performance.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that ref..
100mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
100mm Black Foil Faced 2 Sided Knauf RS60 is a fire, thermal and acoustic insulation slab specially designed for concrete soffits, an A1 class non-combustible rock mineral wool.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy specially ..
100mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
100mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 100mm aluminium ..
100mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil insulation slab provid..
100mm Foil Faced on Both Sides Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil faced two sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 100mm x 600mm x 1200mm alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible product
Provides excellent fire, thermal and acoustic performance.
100mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 100mm aluminium foil in..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
100mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
100mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) rigid, non-combustible rock mineral wool insulation slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-c..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 - Excellent thermal and acoustic properties
110mm Unilin SR/FB Framing Board, an insulation used in ventilated cladding, timber and steel framed systems up to 11m in height, SR/FB can be used between studs or as an insulated sheathing.
Safe-R SR/FB is manufactured to EN 13166 by Unilin Insulation with certified lambda (thermal conductivity..
120mm Kingspan Kooltherm K112 Framing Board (pack of 2 sheets) is an ideal solution for new build, refurbishment and Modern Methods of Construction (MMC).
Kooltherm K112 120mm is a premium performance insulation board with a thermal conductivity of 0.019 W/mk, it allows target U-values to be reac..
120mm Rainscreen Cladding Insulation Xtratherm Safe-R SR/RS is a high-class rigid phenolic insulation board with a low emissivity foil facings designed for ventilated rainscreen cladding applications in new build and refurbishment projects.
Xtratherm SR/RS 120mm x 2400mm x 1200mm insulation board..
Lower Lambda values for improved U-Values
Superior Lambda Value as low as 0.020W/mK
BBA Certified - Certification Number 10/4803
Tested and Approved under BS 8414 and BR135
Euroclass B Fire Classification - Rainscreen Applications
120mm Framing Board Xtratherm Safe-R SR/FB is a top-class rigid foam phenolic insulation board with a low emissivity foil facings designed for use with steel and timber frame applications up to 18m in height.
A high-performance BBA certified phenolic 2400mm x 1200mm square edge panel with an appr..
Suitable for use in Steel and Timber Frame Systems
Superior Lambda Value as low as 0.020W/mK
Provides excellent U-Values and improved thermal bridging detailing
Can be used between studs or as an insulated sheathing board
120mm Xtroliner XO/FB Unilin, comprising a rigid Polyisocyanurate (PIR) core with low emissivity foil facings to achieve most efficient U-values in steel or timber frame construction.
Buildings constructed using a steel framed system are insulated on the outer side of the construction creating a ..
120mm Unilin XO/FB Framing Board (Steel and Timber Frame Applications)
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
Used between studs or as an insulated sheathing in a wide range of constructions
Suitable for new build and refurbishment projects in buildings up to 11m in height
120mm Xtratherm Xtroliner PIR Framing Board XO/FB is a premium polyisocyanurate insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB framing board can be ..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
140mm Knauf Rocksilk Flexible Insulation Slab is a functional thermal and acoustic multi-purpose rock mineral wool insulation slab which can be used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Knauf Fle..
20mm PROMATECT-H Structural Calcium Silicate Board is a rigid non-combustible fire protection matrix engineered fire-board reinforced with selected fibres and fillers that does not contain formaldehyde and asbestos.
Fire Board Promatect-H 20mm can be used as a fire protection of steel and concret..
20mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
20mm Versapanel Cement Bonded Particle Board Class 0 is a robust cement bonded particle building board offering exceptional strength, mechanical and acoustic performance compared with other exterior gypsum sheathing boards.
Euroform Versapanel A2 20mm is a special SFS sheathing board that can be..
20mm Cement Bonded Particle Board CBPB
Versapanel A2, Class 0 Sheathing Building Board
Can be used in external and internal applications
Versatile Versapanel for residential and public applications
Exceptional strength, mechanical and acoustic performance
30mm Promat PROMATECT-250 is a solid fire protective board designed for structural steelwork and mezzanine floors, an A1 class non-combustible low density calcium-silicate board made with unique Promat PROMAXON® technology.
Promat PROMATECT 250 is a 30mm thick, 2500mm long by 1200mm wide calcium ..
30mm Promat PROMATECT 250 Fire Protection Board
A1 non-combustible low density calcium-silicate insulation board
PROMATECT®-250 is made with special PROMAXON® technology
Used for protection of steel structures and mezzanine floors
Provides up to 150 minutes fire protection to structural steelwork