Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Insulated plasterboard also called 'thermal' is a modern version of wallboard bonded to insulation core such as polystyrene EPS, Phenolic foam, or extruded XPS which is the best cost-effective solution to insulate your walls and ceiling without adding too much depth. They are also useful in roofs when it comes to flat roof windows or pitched roof windows. Thermal plasterboard is available in a variety of sizes and thicknesses ranging from 22mm, 25mm, 30mm up to 112.5mm. It can be fixed with plasterboard fixings known as a plasterboard screws or plasterboard wall plugs or even Knauf or British Gypsum plasterboard adhesive. The ability to install Insulation Plasterboard quickly as its a two in one solution is a huge advantage. It can also be plastered with MultiFinish plaster. Thermal wallboard goes by many names and is well known from Google search engine as Wickes or Kingspan insulated plasterboard. However, it can be quickly easily located near your postcode by driving down to the nearest B&Q or Screwfix store. Most common insulated plasterboard thicknesses are 25mm (24.5mm) and 50mm (49.5mm). For more information on how to install insulated plasterboard click here.
TYPES OF INSULATED PLASTERBOARD
When it comes to application you can choose from standard insulated plasterboard commonly used on walls and ceilings and moisture resistant insulated plasterboard for wet rooms, bathrooms and shower rooms.
STANDARD INSULATED PLASTERBOARD
A standard insulated plasterboard comprises standard Drywall Plasterboard pre-bonded to thermal insulation core.
MOISTURE RESISTANT PLASTERBOARD
Moisture resistant insulated plasterboard is backed with rigid polyisocyanurate foam insulation and two vapour barriers which are specially designed to use in wall lining and internal wall partitions. These boards are mostly used where both high thermal performance and high moisture resistance is required.
When it comes to thermal plasterboard performance you can choose from Phenolic, EPS (Expanded PolyStyrene), XPS (EXtruded PolyStyrene) and PIR (PolyIsocyanuRate) insulation core.
PHENOLIC FOAM PLASTERBOARD
Phenolic plasterboard is a premium performance insulation with a fibre-free rigid thermoset phenolic core. It provides a level of performance that is unrivalled in the world of rigid thermoset insulation materials with a thermal conductivity of just 0.018 W/mK across all thicknesses. It is a top-class three-in-one product for internal wall insulation used as mechanically fixed and adhesively bonded 'dot and dab' insulated plasterboard. For example, Kingspan K118 range is a high-efficiency phenolic insulation core with a certified thermal conductivity (lambda value) of 0.018W/mK factory bonded to 12.5mm premium plasterboard. Kooltherm K118 (previously Kingspan K18 and K17) provides high-levels of insulation, dry-lining and vapour control layer in one easily applicable 2400mm x 1200mm (8x4) insulating sheets.
PIR INSULATED PLASTERBOARD
Pir core wall panel is an insulated plasterboard combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot and dab direct bonding.
EXPANDED POLYSTYRENE EPS INSULATED PLASTERBOARD
EPS Insulated Plasterboard is a cost-effective way of improving thermal efficiency in both wall and roof applications. Made from expanded polystyrene foam insulation bonded to 12.5mm thick plasterboard, this insulation solution can be used for both new build and refurbishment projects.
EXTRUDED POLYSTYRENE XPS INSULATED PLASTERBOARD
XPS Laminates are fabricated by bonding a sheet of XPS insulation, a close-celled extruded polystyrene board made from melting plastic resins that are then extruded through a die and expanded during the cooling process, to tapered edge plasterboard.
Insulated plasterboards are produced by well known brands such as Kingspan, Celotex, Xtratherm, British Gypsum, Warmline and Knauf. All of the brands offer a variety of products and thicknesses. Moreover, boards are available either in standard or moisture resistant versions. The thickness of insulated plasterboard used will depend on the build-up of the wall and u-value which is being targeted.
Building Regulations are law and must be met when applied to any project over a certain size. Where 50 percent or more of the internal wall is being renovated building regulations would normally apply, and the thermal insulation of the wall would have to meet the standards required by building regulations approved documents. The regulation that refers to the thermal efficiency requirements when carrying out renovation or replacement work on an existing dwelling is explained in Approved Document L1B (ADL1B). For instance, to meet Part L when constructing an extension you need to meet a U-value of 0.28W/m2K. When new layers are added to a thermal element through being dry lined internally the U-value of 0.30W/m2K is required. If at least 50% of the element is being renovated then it should be upgraded to achieve the U-values as follow:
Pitched roof - insulation at ceiling level 0.16W/m2K.
Flat roof or roof with integral insulation 0.18W/m2K.
Pitched roof - insulation between rafters 0.18W/m2K.
Insulated plasterboard is not suitable for use on such walls where there is a risk of moisture penetration or on timber or steel frame construction. This method is only suitable for use on brick, blocks, concrete cavity or rendered solid walls which are dry, stable and most importantly free from moisture penetration. Where you don't have cavities in your wall you shouldn't adhesively bond because of the risk of moisture penetration from outside. In this particular situation you should always mechanically fix wooden battens and screw the plasterboard to battens.
INSULATED PLASTERBOARD PRICE
Because thermal plasterboard can be used in so many different situations, it is important to know you’re getting the best price, particularly if you’re working within a tight budget. If you are looking for the plaster-boarding cost per m2 you should be looking for £9.05 per m2 and £26.09 per sheet. This is based on British Gypsum Gyproc ThermaLine Basic insulated plasterboard. Here at InsulationGo we offer other top brands such as Kingspan, Xtratherm, Knauf and Warmline. We usually keep in stock our most favourite Kingspan K118 in 50mm thickness.
In terms of performance all types of insulated plasterboards are classified in given order (based on 52.5mm thickness):
The cheapest product would be EPS bonded to plasterboard such as Warmline EPS Insulated Plasterboard, British Gypsum Gyproc Thermaline Basic or Knauf EPS Thermal Laminate. On the other hand, the most expensive insulated plasterboard would be phenolic insulated plasterboard such as Kingspan Kooltherm K118 or Xtratherm XT/TL Thermal Liner. Those boards are the most effective type of rigid phenolic insulation boards currently available in the UK.
Video credit:https://www.youtube.com/watch?v=fHX0QOV4e8U
74.5mm (65mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 65mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
65mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
74.5mm (75mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
74.5mm (75mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 65mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ti..
74.5mm (75mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
74.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
74.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner is an insulated panel combined of PIR insulation foam core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Boa..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
77.5mm (65mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 65mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
65mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
77.5mm (78mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
77.5mm (78mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 65mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
77.5mm (78mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
77.5mm Xtratherm XT/TL Thermal Liner Dot and Dab is a high-quality insulated plasterboard combined of PIR insulation foam core bonded to 12.5mm plasterboard used for internal applications, fixed with adhesive dot & dab direct bonding.
Xtratherm XT/TL Drylining Board is a highly versatile and dura..
77.5mm Xtratherm XT/TL-MF Thermal Liner Insulated Plasterboard is a 65mm PIR insulation foam core bonded to 12.5mm plasterboard designed to provide thermal insulation and vapour barrier for walls, sloped roofs and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed is a highly versatile and durable ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
79.5mm (70mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 70mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
70mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
79.5mm (80mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
79.5mm (80mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 70mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ti..
79.5mm (80mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
79.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
79.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation and dry lining in one operation that is suitable for internal masonry ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
82.5mm (70mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 70mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
70mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
82.5mm (83mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
82.5mm (83mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 70mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
82.5mm (83mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
82.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
82.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is a 70mm PIR insulation foam core bonded to 12.5mm plasterboard designed to thermal insulation for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a hig..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
84.5mm (75mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 75mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
75mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
84.5mm (85mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
84.5mm (85mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 75mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ti..
84.5mm (85mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
84.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
84.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation and dry lining in one operation that is suitable for internal masonry ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
87.5mm (75mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 75mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
75mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
87.5mm (88mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
87.5mm (88mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 75mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
87.5mm (88mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
87.5mm Xtratherm XT/TL Thermal Liner Dot and Dab is an insulated plasterboard combined of PIR insulation foam core bonded to 12.5mm plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct bonding.
Xtratherm XT/TL Drylining Board is a highly versatile and dura..
87.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is a 75mm PIR rigid insulation core bonded to 12.5mm plasterboard designed for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly versatile and dur..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
89.5mm (80mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 80mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
80mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
89.5mm (90mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
89.5mm (90mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 80mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ti..
89.5mm (90mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
89.5mm Xtratherm XT/TL Thermal Liner Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm tapered edge plasterboard that is suitable for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile a..
89.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation and dry lining in one operation that is suitable for internal masonry ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
92.5mm (80mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 80mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
80mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
92.5mm (93mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
92.5mm (93mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 80mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
92.5mm (93mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
92.5mm Xtratherm XT/TL Thermal Liner Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 12.5mm plasterboard that is suitable for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable t..
92.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is a 80mm PIR rigid insulation foam core bonded to 12.5mm plasterboard suitable for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Board is a highly versatile and durable ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
99.5mm (90mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 90mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
90mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
99.5mm (100mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
99.5mm (100mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 90mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
102.5mm (90mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 90mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer a..
90mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
102.5mm (103mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
102.5mm Unilin XT/TL-MF (Mech Fix) is an insulated plasterboard made of 90mm PIR rigid foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight barrie..
99.5mm Xtratherm XT/TL Thermal Liner Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm tapered edge plasterboard used for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable t..
99.5mm Xtratherm XT/TL-MF Thermal Liner Insulated Plasterboard is a 90mm PIR insulation core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation and dry lining for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining B..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
102.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 12.5mm tapered edge plasterboard.
Xtratherm XT/TL Drylining Board is a highly versatile and durable thermal insulated pl..
102.5mm Xtratherm XT/TL-MF Thermal Liner Mech Fix Insulated Plasterboard is made up of 90mm PIR insulation core bonded to 12.5mm plasterboard designed to provide high levels of thermal insulation and vapour barrier for walls and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Unilin Board is a hi..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
109.5mm (100mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 100mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer ..
100mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
109.5mm (110mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
109.5mm Unilin XT/TL-MF (Mech Fix) is an insulated plasterboard made of 100mm PIR rigid foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight barrie..
109.5mm Xtratherm XT/TL Thermal Liner Dot and Dab is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm tapered edge plasterboard that used for internal applications, fixed with adhesive dot & dab direct bonding.
Xtratherm XT/TL Drylining Board is a highly versatile and..
109.5mm Xtratherm XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is an insulated panel combined of 100mm PIR rigid insulation foam core bonded to 9.5mm plasterboard, used for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
112.5mm (100mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 100mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer..
100mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
112.5mm (113mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
112.5mm Unilin XT/TL-MF (Mech Fix) is an insulated plasterboard made of 100mm PIR rigid foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight barri..
112.5mm Xtratherm XT/TL Insulated Plasterboard Dot and Dab is an insulated panel combined of PIR rigid insulation foam core bonded to 12.5mm plasterboard used for internal applications, fixed with adhesive dot & dab direct bonding.
Xtratherm XT/TL Drylining Board is a highly versatile and durable..
112.5mm Xtratherm (Unilin) XT/TL-MF Thermal Liner Insulated Plasterboard is made up of 100mm PIR insulation foam core bonded to 12.5mm plasterboard to provide thermal insulation and vapour barrier for walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a h..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
119.5mm (110mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 110mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer ..
110mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
119.5mm (120mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
119.5mm (120mm) Unilin XT/TL-MF is an insulated plasterboard made of 110mm PIR rigid foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight barrier, ..
119.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm plasterboard used for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable t..
119.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is a 110mm PIR insulation foam core bonded to 9.5mm plasterboard designed to provide thermal insulation and dry lining in one operation that is suitable for internal masonry walls, sloped rafters and ceilings.
Xtra..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
122.5mm (110mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 110mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer..
110mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
122.5mm (123mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
122.5mm Unilin XT/TL-MF is a foil backed insulated plasterboard made of 110mm PIR rigid foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight barri..
122.5mm Xtratherm XT/TL-MF Thermal Liner Mech Fix Insulated Palsterboard consist of 110mm PIR rigid insulation foam core bonded to 12.5mm plasterboard, used for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Unilin Board is a highly versatile and dura..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
122.5mm Xtratherm XT/TL Thermal Liner Insulated Plasterboard Dot and Dab is an excellent insulated panel combined of 110mm PIR rigid foam insulation core bonded to 12.5mm plasterboard used for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable thermal insulat..