Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Insulated plasterboard also called 'thermal' is a modern version of wallboard bonded to insulation core such as polystyrene EPS, Phenolic foam, or extruded XPS which is the best cost-effective solution to insulate your walls and ceiling without adding too much depth. They are also useful in roofs when it comes to flat roof windows or pitched roof windows. Thermal plasterboard is available in a variety of sizes and thicknesses ranging from 22mm, 25mm, 30mm up to 112.5mm. It can be fixed with plasterboard fixings known as a plasterboard screws or plasterboard wall plugs or even Knauf or British Gypsum plasterboard adhesive. The ability to install Insulation Plasterboard quickly as its a two in one solution is a huge advantage. It can also be plastered with MultiFinish plaster. Thermal wallboard goes by many names and is well known from Google search engine as Wickes or Kingspan insulated plasterboard. However, it can be quickly easily located near your postcode by driving down to the nearest B&Q or Screwfix store. Most common insulated plasterboard thicknesses are 25mm (24.5mm) and 50mm (49.5mm). For more information on how to install insulated plasterboard click here.
TYPES OF INSULATED PLASTERBOARD
When it comes to application you can choose from standard insulated plasterboard commonly used on walls and ceilings and moisture resistant insulated plasterboard for wet rooms, bathrooms and shower rooms.
STANDARD INSULATED PLASTERBOARD
A standard insulated plasterboard comprises standard Drywall Plasterboard pre-bonded to thermal insulation core.
MOISTURE RESISTANT PLASTERBOARD
Moisture resistant insulated plasterboard is backed with rigid polyisocyanurate foam insulation and two vapour barriers which are specially designed to use in wall lining and internal wall partitions. These boards are mostly used where both high thermal performance and high moisture resistance is required.
When it comes to thermal plasterboard performance you can choose from Phenolic, EPS (Expanded PolyStyrene), XPS (EXtruded PolyStyrene) and PIR (PolyIsocyanuRate) insulation core.
PHENOLIC FOAM PLASTERBOARD
Phenolic plasterboard is a premium performance insulation with a fibre-free rigid thermoset phenolic core. It provides a level of performance that is unrivalled in the world of rigid thermoset insulation materials with a thermal conductivity of just 0.018 W/mK across all thicknesses. It is a top-class three-in-one product for internal wall insulation used as mechanically fixed and adhesively bonded 'dot and dab' insulated plasterboard. For example, Kingspan K118 range is a high-efficiency phenolic insulation core with a certified thermal conductivity (lambda value) of 0.018W/mK factory bonded to 12.5mm premium plasterboard. Kooltherm K118 (previously Kingspan K18 and K17) provides high-levels of insulation, dry-lining and vapour control layer in one easily applicable 2400mm x 1200mm (8x4) insulating sheets.
PIR INSULATED PLASTERBOARD
Pir core wall panel is an insulated plasterboard combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot and dab direct bonding.
EXPANDED POLYSTYRENE EPS INSULATED PLASTERBOARD
EPS Insulated Plasterboard is a cost-effective way of improving thermal efficiency in both wall and roof applications. Made from expanded polystyrene foam insulation bonded to 12.5mm thick plasterboard, this insulation solution can be used for both new build and refurbishment projects.
EXTRUDED POLYSTYRENE XPS INSULATED PLASTERBOARD
XPS Laminates are fabricated by bonding a sheet of XPS insulation, a close-celled extruded polystyrene board made from melting plastic resins that are then extruded through a die and expanded during the cooling process, to tapered edge plasterboard.
Insulated plasterboards are produced by well known brands such as Kingspan, Celotex, Xtratherm, British Gypsum, Warmline and Knauf. All of the brands offer a variety of products and thicknesses. Moreover, boards are available either in standard or moisture resistant versions. The thickness of insulated plasterboard used will depend on the build-up of the wall and u-value which is being targeted.
Building Regulations are law and must be met when applied to any project over a certain size. Where 50 percent or more of the internal wall is being renovated building regulations would normally apply, and the thermal insulation of the wall would have to meet the standards required by building regulations approved documents. The regulation that refers to the thermal efficiency requirements when carrying out renovation or replacement work on an existing dwelling is explained in Approved Document L1B (ADL1B). For instance, to meet Part L when constructing an extension you need to meet a U-value of 0.28W/m2K. When new layers are added to a thermal element through being dry lined internally the U-value of 0.30W/m2K is required. If at least 50% of the element is being renovated then it should be upgraded to achieve the U-values as follow:
Pitched roof - insulation at ceiling level 0.16W/m2K.
Flat roof or roof with integral insulation 0.18W/m2K.
Pitched roof - insulation between rafters 0.18W/m2K.
Insulated plasterboard is not suitable for use on such walls where there is a risk of moisture penetration or on timber or steel frame construction. This method is only suitable for use on brick, blocks, concrete cavity or rendered solid walls which are dry, stable and most importantly free from moisture penetration. Where you don't have cavities in your wall you shouldn't adhesively bond because of the risk of moisture penetration from outside. In this particular situation you should always mechanically fix wooden battens and screw the plasterboard to battens.
INSULATED PLASTERBOARD PRICE
Because thermal plasterboard can be used in so many different situations, it is important to know you’re getting the best price, particularly if you’re working within a tight budget. If you are looking for the plaster-boarding cost per m2 you should be looking for £9.05 per m2 and £26.09 per sheet. This is based on British Gypsum Gyproc ThermaLine Basic insulated plasterboard. Here at InsulationGo we offer other top brands such as Kingspan, Xtratherm, Knauf and Warmline. We usually keep in stock our most favourite Kingspan K118 in 50mm thickness.
In terms of performance all types of insulated plasterboards are classified in given order (based on 52.5mm thickness):
The cheapest product would be EPS bonded to plasterboard such as Warmline EPS Insulated Plasterboard, British Gypsum Gyproc Thermaline Basic or Knauf EPS Thermal Laminate. On the other hand, the most expensive insulated plasterboard would be phenolic insulated plasterboard such as Kingspan Kooltherm K118 or Xtratherm XT/TL Thermal Liner. Those boards are the most effective type of rigid phenolic insulation boards currently available in the UK.
Video credit:https://www.youtube.com/watch?v=fHX0QOV4e8U
72.5mm Insulated Plasterboard Ultra Liner is a thermal laminate insulation board combined of 60mm PIR core bonded to 12.5mm plasterboard used for walls, ceiling and pitched roof applications.
This ultimate thermal laminate insulation board 72.5mm x 1200mm x 2400mm provides high levels of insulati..
72.5mm x 1200mm x 2400mm PIR Insulated Plasterboard
Ultimate thermal laminate insulation board for drylining
Ultraliner is used for walls, ceiling and pitched roof applications
PIR insulation core thermal conductivity (lambda) of 0.022W/mK
Ultra Liner PIR provides an effective Vapour Control Layer (VCL)
112.5mm Safe-R SR/TB Thermal Liner Xtratherm Insulated Plasterboard is a combination of 100mm premium phenolic foam insulation core with a composite foil facings bonded to 12.5mm tapered edge plasterboard for dry lining internal walls.
Safe-R Xtratherm SR/TB Thermal Liner range is a high-efficien..
BBA Certification No.10/4803.
Integral Vapour (Check) Control Layer
Reaction to Fire Euroclass B-s1, d0
Suitable for Newbuild and Renovation Projects
High levels of insulation and drylining in one fix
39.5mm (30mm) Plasterboard with PIR Insulation Unilin XT/TL is made of 30mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable for..
30mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
39.5mm Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
39.5mm Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 30mm Unilin PIR insulation core bonded to 9.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ..
39.5mm Xtratherm XT/TL Thermal Liner Insulated Plasterboard Dot and Dab is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durabl..
39.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix consist of PIR rigid insulation foam core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
57.5mm Celotex PL4000 PIR Thermal Insulation Board (PL4045) is an easy to install high-performance insulated plasterboard consist of polyisocyanurate rigid insulation foam core bonded to 12.5mm plasterboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists..
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
57.5mm (58mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 45mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal..
57.5mm (58mm) XT/TL-FR is a fire resistant insulated plasterboard made of 45mm polyisocyanurate (PIR) insulation core bonded to 12.5mm fire plasterboard used in drylining applications.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single layer..
57.5mm (45mm) XT/TL-FR Fire Resistant Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
57.5mm Xtratherm XT/TL-MR Thermaliner PIR MR Moisture Resistant is an insulated panel combined of PIR rigid insulation foam core bonded to 12.5mm green moisture resistant plasterboard designed for internal building areas of high humidity conditions, ideal for receiving a plaster finish or for direct..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
72.5mm Kingspan Insulated Plasterboard Kooltherm K118 (70mm) is a rigid fibre-free thermoset phenolic insulation core faced with paperlines on the reverse side and plasterboard on the front face, an advanced solution for dry lining applications.
K118 Kingspan Kooltherm 72.5mm is a highly durabl..
72.5mm Kingspan Kooltherm® K118 (previously K18 and K17)
3 in 1 product - insulation, dry-lining and vapour control in one board
An Ideal solution for both new build and refurbishment projects
Kingspan Kooltherm K118 is an advanced insulated plasterboard
Premium performance board thermal conductivity of 0.019 W/mK
The 77.5mm Insulated Plasterboard Ultraliner is a great performance PIR rigid insulation core bonded to 12.5mm tapered edge plasterboard used for walls, ceiling and pitched roof applications.
This ultimate thermal laminate insulation board 77.5mm x 1200mm x 2400mm provides high levels of insulati..
77.5mm x 1200mm x 2400mm PIR Insulated Plasterboard
Ultimate thermal laminate insulation board for drylining
Ultraliner is used for walls, ceiling and pitched roof applications
PIR insulation core thermal conductivity (lambda) of 0.022W/mK
Ultra Liner PIR provides an effective Vapour Control Layer (VCL)
92.5mm Insulated Plasterboard SR/TB, comprising a rigid phenolic core between composite glass tissue/foil facings bonded to 12.5mm plasterboard used for drylining walls fixed with adhesive dabs.
The insulated drylining wall insulation Unilin Safe-R SR/TB with certified lambda value (thermal condu..
92.5mm Unilin SR/TB Insulated Plasterboard Drylining Walls (Dot and Dab)
Insulated plasterboard made of phenolic core between glass tissue/foil facings
Faced with 12.5mm plasterboard used for drylining walls fixed with adhesive dabs
Insulated drylining wall insulation Unilin Safe-R SR/TB lambda value of 0.020 W/mK
SR/TB Providing the solution of choice in new build and refurbishment projects
92.5mm Insulated Plasterboard SR/TB-MF (Mech Fix), comprising a rigid phenolic core between foil facings bonded to 12.5mm plasterboard used for dry lining internal walls, sloped roofs and ceilings.
Foil facing on both sides of SR/TB-MF incorporates an integral vapour control layer, which helps to..
Single Board Kingspan Kooltherm K118 72.5mm is a market leading, premium performance rigid foam phenolic core insulated plasterboard used as an insulated drylining board for internal walls.
Kooltherm K118 range is a rigid phenolic thermoset insulation core with a certified thermal conductivity (l..
72.5mm Kingspan Kooltherm K118 Insulated Plasterboard (K18 and K17)
High-quality insulation material made of a rigid phenolic core and plasterboard
Premium performance, lower lambda for internal wall insulation projects
Unbeatable insulated plasterboard with no equivalent to K118 thermal performance
Premium performance insulation board - thermal conductivity of 0.019 W/mK
112.5mm Unilin SR/TB is a high performance insulated plasterboard, comprising a rigid phenolic insulation core bonded to 12.5mm plasterboard used for drylining walls fixed with adhesive dabs.
The insulated drylining wall insulation Unilin Safe-R SR/TB with certified lambda value (thermal conducti..
112.5mm Unilin SR/TB Insulated Plasterboard Drylining Walls (Dot and Dab)
Insulated plasterboard made of phenolic core between glass tissue/foil facings
Faced with 12.5mm plasterboard used for drylining walls fixed with adhesive dabs
Insulated drylining wall insulation Unilin Safe-R SR/TB lambda value of 0.020 W/mK
SR/TB Providing the solution of choice in new build and refurbishment projects
112.5mm Unilin SR/TB-MF is a high performance insulated plasterboard, comprising a rigid phenolic core bonded to 12.5mm plasterboard used for dry lining internal walls, sloped roofs and ceilings.
Foil facing on both sides of SR/TB-MF incorporates an integral vapour control layer, which helps to r..
112.5mm Unilin SR/TB-MR is a high performance moisture resistant insulated plasterboard, comprising a 100mm thick rigid foam phenolic core bonded to 12.5mm green plasterboard used for dry lining.
MR Insulated Drylining Board improves moisture resistance and thermal performance by reducing effects..
42.5mm (30mm) Plasterboard with PIR Insulation Unilin XT/TL is made of 30mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable fo..
30mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
42.5mm Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
42.5mm Xtratherm XT/TL Thermal Liner Dot and Dab is an insulated panel combined of PIR insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable thermal insulated plasterbo..
42.5mm Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 30mm Unilin PIR insulation core bonded to 12.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour..
42.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix is an insulated panel combined of PIR insulation foam core bonded to 12.5mm plasterboard that is suitable for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly versatile an..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
62.5mm Celotex PL4000 PIR Thermal Insulation Board (PL4050) is an easy to install high-performance insulated plasterboard consist of polyisocyanurate rigid insulation foam core bonded to 12.5mm plasterboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists..
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
62.5mm (63mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 50mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal..
62.5mm (63mm) Insulated Plasterboard XT/TL-FR is 30 minutes fire rated insulated plasterboard made of 50mm PIR insulation and 12.5mm fire plasterboard used in drylining applications.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single layer a..
62.5mm (50mm) XT/TL-FR Fire Resistant PIR Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
62.5mm Xtratherm XT/TL-MR Thermal Moisture Resistant Insulated Plasterboard consist of PIR insulation core bonded to 12.5mm green moisture resistant plasterboard designed for internal building areas of high humidity conditions.
XT/TL-MR Thermal Liner Thin-R is designed to improve moisture resista..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
82.5mm Insulated Plasterboard Ultra Liner PIR is an effective thermal insulation and drylining laminated board that is suitable for internal applications in walls, ceilings and pitched roof.
This ultimate thermal laminate insulation board provides high levels of insulation and drylining in one ap..
82.5mm x 1200mm x 2400mm PIR Insulated Plasterboard
Ultimate thermal laminate insulation board for drylining
Ultraliner is used for walls, ceiling and pitched roof applications
PIR insulation core thermal conductivity (lambda) of 0.022W/mK
Ultra Liner PIR provides an effective Vapour Control Layer (VCL)
Insulated Plasterboard 82.5mm (80mm) Kingspan K118 Kooltherm® is an unbeatable insulated plasterboard with no equivalent to K118 premium thermal performance (lambda value as low as 0.019 W/mK) used for internal wall insulation projects.
82.5mm K118 Kingspan Kooltherm Insulated Plasterboard is a..
82.5mm Kingspan Kooltherm K118 (previously K18 and K17)
Insulation, drylining and vapour control in one board - BBA Certificate 16/5299
Easy to handle and install - Ideal for new build, retrofit and refurbishment
Kingspan K118 Kooltherm® is an unbeatable insulated plasterboard
Premium performance Phenolic insulation thermal conductivity of 0.019 W/mK
Single Board Kingspan K118 82.5mm is a premium insulation, drylining and vapour control in one board, it can be used with solid stonework and brickwork, with or without an existing lining.
Kooltherm K118 range is a rigid phenolic thermoset insulation core with a certified thermal conductivity (la..
82.5mm Kingspan Kooltherm K118 Insulated Plasterboard (K18 and K17)
High-quality insulation material made of a rigid phenolic core and plasterboard
Premium performance, lower lambda for internal wall insulation projects
Unbeatable insulated plasterboard with no equivalent to K118 thermal performance
Premium performance insulation board - thermal conductivity of 0.019 W/mK
44.5mm (35mm) Unilin XT/TL Insulated Plasterboard Drylining Walls is made of 35mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitab..
35mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
44.5mm Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
44.5mm Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 35mm PIR insulation core bonded to 9.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight b..
44.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
44.5mm Xtratherm XT/TL-MF Thermal Liner Mech Fix is a PIR insulation foam core bonded to 9.5mm plasterboard to provide high levels of thermal insulation and vapour barrier for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly ve..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
67.5mm Celotex PL4000 PIR Thermal Insulation Board (PL4055) is an easy to install high-performance insulated plasterboard consist of polyisocyanurate rigid insulation foam core bonded to 12.5mm plasterboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists..
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
67.5mm (68mm) Fire Resistant Insulated Plasterboard XT/TL-FR is made of 55mm Unilin PIR rigid foam insulation core bonded to 12.5mm fire plasterboard used in drylining applications.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single layer an..
67.5mm (55mm) XT/TL-FR Fire Resistant PIR Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
67.5mm (68mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 55mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal..
67.5mm Xtratherm XT/TL-MR Thermaliner is a green moisture resistant insulated plasterboard designed for internal building areas of high humidity conditions, ideal for receiving a plaster finish or for direct decoration.
XT/TL-MR Thermal Liner Thin-R is designed to improve moisture resistance and ..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
92.5mm Kingspan K118 Kooltherm Insulated Plasterboard is a premium performance, lower lambda internal wall insulated plasterboard, with an advanced fibre-free rigid thermoset phenolic core, an advanced solution for dry lining applications.
K118 Kingspan Kooltherm 92.5mm is a highly durable, pre..
92.5mm (90mm) Kingspan Kooltherm® K118 (previously K18 and K17)
K118 - 2400mm x 1200mm x 92.5mm (8' x 4') standard sheet size
92.5mm x 1200mm x 2400mm Insulated Plasterboard PIR Ultra Liner Board is a high-performance thermal laminate insulation board used for walls, ceiling, pitched and flat roof applications.
This ultimate thermal laminate 92.5mm insulation board provides high levels of insulation and drylining in one..
92.5mm x 1200mm x 2400mm PIR Insulated Plasterboard
Ultimate thermal laminate insulation board for drylining
Ultraliner is used for walls, ceiling and pitched roof applications
PIR insulation core thermal conductivity (lambda) of 0.022W/mK
Ultra Liner PIR provides an effective Vapour Control Layer (VCL)
Single Board Kooltherm Kingspan K118 is a 92.5mm thick premium performance insulated plasterboard suitable for both mechanically fixed and adhesively bonded insulated drylining applications.
Kooltherm K118 range is a rigid phenolic thermoset insulation core with a certified thermal conductivity (..
92.5mm Kingspan Kooltherm K118 Insulated Plasterboard (K18 and K17)
High-quality insulation material made of a rigid phenolic core and plasterboard
Premium performance, lower lambda for internal wall insulation projects
Unbeatable insulated plasterboard with no equivalent to K118 thermal performance
Premium performance insulation board - thermal conductivity of 0.019 W/mK
Insulated Plasterboard Ultra Liner is a 102.5mm x 1200mm x 2400mm thermal laminate PIR rigid insulation board that is suitable for internal applications in walls, ceilings and pitched roof.
This ultimate thermal laminate 8x4 insulation board provides high levels of insulation and drylining in one..
102.5mm x 1200mm x 2400mm PIR Insulated Plasterboard
Ultimate thermal laminate insulation board for drylining
Ultraliner is used for walls, ceiling and pitched roof applications
PIR insulation core thermal conductivity (lambda) of 0.022W/mK
Ultra Liner PIR provides an effective Vapour Control Layer (VCL)
47.5mm (35mm) Unilin XT/TL PIR Thermal Insulated Plasterboard is made of 35mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable ..
35mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
47.5mm Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
47.5mm Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 35mm PIR insulation core bonded to 12.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight ..
47.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
47.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix is an insulated panel combined of PIR rigid insulation foam core bonded to 12.5mm plasterboard designed to provide high levels of thermal insulation and dry lining in one operation.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
72.5mm Celotex PL4000 PIR Thermal Insulation Board (PL4060) is an easy to install high-performance insulated plasterboard consist of polyisocyanurate rigid insulation foam core bonded to 12.5mm plasterboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists..
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
72.5mm (73mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 60mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal..
72.5mm XT/TL-FR Insulated Plasterboard is made of 60mm rigid foam PIR foil backed insulation core bonded to 12.5mm fire plasterboard used in dry lining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a si..
72.5mm (60mm) XT/TL-FR Fire Resistant PIR Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
72.5mm XT/TL-MR Thermaliner Moisture Resistant is an insulated plasterboard combined of PIR rigid insulation foam core bonded to 12.5mm green moisture resistant plasterboard designed for internal building areas of high humidity conditions.
XT/TL-MR Thermal Liner Thin-R is designed to improve mois..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
49.5mm (40mm) Unilin XT/TL Thermal Liner Insulated Plasterboard is made of 40mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable..
40mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
49.5mm (50mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
49.5mm Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 40mm PIR insulation core bonded to 9.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight b..
49.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
49.5mm Xtratherm XT/TL-MF Thermal Liner Mech Fix is an insulated panel combined of PIR insulation bonded to 9.5mm plasterboard to provide high levels of thermal insulation and vapour barrier for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining B..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
77.5mm Celotex PL4000 PIR Thermal Insulation Board (PL4065) is an easy to install high-performance insulated plasterboard consist of polyisocyanurate rigid insulation foam core bonded to 12.5mm plasterboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists..
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
77.5mm XT/TL-FR is a fire resistant insulated plasterboard made of 65mm PIR rigid insulation core bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a sin..
77.5mm (65mm) XT/TL-FR Fire Resistant PIR Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
77.5mm (78mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 65mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal..
77.5mm Xtratherm XT/TL-MR Thermaline is a rigid PIR insulation foam core bonded to 12.5mm moisture resistant plasterboard designed for internal building areas of high humidity conditions, ideal for receiving a plaster finish or for direct decoration.
XT/TL-MR Thermal Liner Thin-R is designed to i..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
52.5mm (40mm) Unilin XT/TL is a composite insulated plasterboard made of 40mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable ..
40mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
52.5mm Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
52.5mm (53mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 40mm PIR insulation core bonded to 12.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour..
52.5mm (53mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
52.5mm Xtratherm Unilin XT/TL-MF Thermal Liner Mech Fix Drylining Board is an insulated panel combined of PIR insulation core bonded to 12.5mm plasterboard used for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly versatile and..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
52.5mm Xtratherm XT/TL Thermal Liner PIR Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate insulation foam core bonded to 12.5mm plasterboard that is suitable for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable thermal i..
82.5mm (83mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 70mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal..
82.5mm (83mm) Insulated Plasterboard XT/TL-FR is 30 minutes fire rated insulated plasterboard made of 70mm PIR insulation and 12.5mm fire plasterboard used in drylining applications.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single layer a..
82.5mm (70mm) XT/TL-FR Fire Resistant PIR Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
82.5mm Xtratherm XT/TL-MR Thermaliner PIR MR Moisture Resistant is an insulated panel combined of PIR rigid insulation foam core bonded to 12.5mm green moisture resistant plasterboard designed for internal building areas of high humidity conditions, ideal for receiving a plaster finish or for direct..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
54.5mm (45mm) Unilin XT/TL Dot and Dab is a composite insulated plasterboard made of 45mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and i..
45mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
54.5mm (55mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
54.5mm (55mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 45mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and va..
54.5mm (55mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
54.5mm Xtratherm XT/TL Thermal Liner Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm plasterboard that is suitable for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable th..
54.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is a PIR insulation bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board i..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
87.5mm (88mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 75mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal..
87.5mm XT/TL-FR is a fire resistant insulated plasterboard made of 75mm PIR rigid foam insulation core bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in ..
87.5mm (75mm) XT/TL-FR Fire Resistant PIR Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
87.5mm x 1200mm x 2400mm Xtratherm XT/TL-MR Thermaliner is a moisture resistant insulated plasterboard designed for internal building areas of high humidity conditions, ideal for receiving a plaster finish or for direct decoration.
XT/TL-MR Thermal Liner Thin-R is designed to improve moisture res..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
57.5mm (45mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 45mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
45mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
57.5mm Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
57.5mm Xtratherm Unilin XT/TL-MF Thermal Liner Mech Fix is made up of PIR insulation foam core bonded to 12.5mm plasterboard to provide thermal insulation and vapour barrier for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
57.5mm (58mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 45mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and v..
57.5mm (58mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
57.5mm Xtratherm XT/TL Insulated Plasterboard Dot and Dab is a high quality insulated panel combined of PIR insulation foam core bonded to 12.5mm tapered edge plasterboard that is suitable for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable thermal insulat..
92.5mm XT/TL-FR Fire Rated Pink Face Insulated Plasterboard made of 80mm PIR insulation bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single layer ..
92.5mm (80mm) XT/TL-FR Fire Resistant PIR Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
92.5mm (93mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 80mm PIR rigid foam insulation bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal perfo..
92.5mm Xtratherm XT/TL-MR Thermaliner PIR Moisture Resistant is an insulated plasterboard combined of PIR insulation core bonded to 12.5mm moisture resistant plasterboard designed for internal building areas of high humidity conditions.
XT/TL-MR Thermal Liner Thin-R is designed to improve moistur..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
102.5mm (103mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 90mm PIR rigid foam insulation bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal per..
102.5mm XT/TL-FR is a fire resistant insulated plasterboard made of 90mm polyisocyanurate (PIR) rigid foam insulation core bonded to 12.5mm fire plasterboard used in drylining applications.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single ..
102.5mm (90mm) XT/TL-FR Fire Resistant PIR Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
102.5mm Xtratherm XT/TL-MR is a thermal moisture resistant insulated plasterboard designed for internal building areas of high humidity conditions, ideal for receiving a plaster finish or for direct decoration.
XT/TL-MR Thermal Liner Thin-R is designed to improve moisture resistance and thermal p..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
59.5mm (50mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 50mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
50mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
59.5mm (60mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
59.5mm (60mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 50mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and va..
59.5mm (60mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
59.5mm Xtratherm XT/TL Thermal Liner PIR Insulated Plasterboard Dot and Dab is a high-quality insulated panel combined of polyisocyanurate insulation foam core bonded to 9.5mm plasterboard that is suitable for internal applications.
Xtratherm (Unilin) XT/TL Drylining Board is a highly versatile a..
59.5mm Xtratherm (Unilin) XT/TL-MF Thermal Liner Mech Fix Drylining Board is made up of PIR insulation foam core bonded to 9.5mm plasterboard suitable for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly versatile and durable t..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
112.5mm XT/TL-FR is an insulated plasterboard made of 100mm Unilin PIR rigid foam insulation core bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a sin..
112.5mm (100mm) XT/TL-FR Fire Resistant PIR Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
112.5mm (113mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 100mm PIR rigid foam insulation bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal pe..
112.5mm Xtratherm XT/TL-MR Thermaliner PIR MR Moisture Resistant is an insulated panel combined of PIR rigid insulation foam core bonded to 12.5mm green moisture resistant plasterboard designed for internal building areas of high humidity conditions, ideal for receiving a plaster finish or for direc..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
62.5mm (50mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 50mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
50mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
62.5mm (63mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
62.5mm (63mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 50mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
62.5mm (63mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
62.5mm Xtratherm XT/TL Thermal Liner PIR Insulated Plasterboard Dot and Dab is an excellent insulated panel combined of polyisocyanurate insulation foam core bonded to 12.5mm plasterboard that is suitable for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable..
62.5mm Xtratherm XT/TL-MF Thermal Liner Mech Fix consist of PIR insulation foam core bonded to 12.5mm plasterboard designed to provide thermal insulation and vapour barrier for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly v..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
122.5mm (123mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 110mm PIR rigid foam insulation bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal pe..
122.5mm Fire Insulated Plasterboard XT/TL-FR is an extra thick fire and thermal insulation board made of 110mm PIR bonded to 12.5mm pink fire plasterboard used in dry lining applications.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single la..
122.5mm (110mm) XT/TL-FR Fire Resistant PIR Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
122.5mm Xtratherm XT/TL-MR Thermaliner PIR MR Moisture Resistant is an insulated panel combined of PIR rigid insulation foam core bonded to 12.5mm green moisture resistant plasterboard designed for internal building areas of high humidity conditions, ideal for receiving a plaster finish or for direc..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
64.5mm (55mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 55mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
55mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
64.5mm (65mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
64.5mm (65mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 55mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ti..
64.5mm (65mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
64.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
64.5mm Xtratherm XT/TL-MF Thermal Liner Mech Fix Insulated Plasterboard consist of PIR insulation foam core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining B..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
67.5mm (55mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 55mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
55mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
67.5mm (68mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
67.5mm (68mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 55mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
67.5mm (68mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
67.5mm Xtratherm XT/TL Thermal Liner Insulated Plasterboard Dot and Dab is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct bonding.
Xtratherm XT/TL Dr..
67.5mm Xtratherm (Unilin) XT/TL-MF Thermal Liner Mech Fix Insulated Plasterboard is a 55mm PIR insulation core bonded to 12.5mm plasterboard designed to provide high levels of thermal insulation for masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
69.5mm Xtratherm XT/TL Insulated Plasterboard Dot and Dab is an insulated panel combined of PIR insulation foam core bonded to 9.5mm plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct bonding.
Xtratherm XT/TL Drylining Board is a highly versatile and dur..
69.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is an insulated panel combined of PIR insulation foam core bonded to 9.5mm plasterboard designed for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a hi..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
72.5mm (60mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 60mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
60mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
72.5mm (73mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
72.5mm (73mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 60mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
72.5mm (73mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
72.5mm Xtratherm XT/TL Thermal Liner PIR Insulated Plasterboard (Dot and Dab) is an excellent insulated panel combined of polyisocyanurate foam insulation core bonded to 12.5mm plasterboard, used for internal applications, fixed with adhesive.
Xtratherm XT/TL Drylining Board is a highly versatile..
72.5mm Xtratherm XT/TL-MF Thermal Liner Insulated Plasterboard is made up of PIR insulation core bonded to 12.5mm plasterboard designed to provide thermal insulation and vapour barrier for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board i..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications