Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Internal wall insulation is an economic and alternative way to insulate solid masonry wall with inner insulation designed to increase the thermal performance and improve its airtightness. Most often it requires the use of PIR rigid boards, phenolic boards or rock wool roll. The thickness of insulation needed to insulate the wall internally strongly depends on the specific U-value that you want to achieve. A lower figure means better thermal performance. Current Building Regulations require a maximum U-value of 0.3W/m2 for existing buildings (0.16W/m2 for new buildings). Achieving that U-value for solid walls will mean installing at least 120mm of Kingspan, Xtratherm or Celotex rigid insulation. However, Kingspan Kooltherm® K118 is the most commonly used insulating material that meets current U-value requirements with just 50mm (62.5mm) thickness. Since is only 50mm thick it is a top-class three-in-one product for internal wall insulation used as mechanically fixed and adhesively bonded 'dot and dab' insulated plasterboard. The Kingspan Kooltherm K-range comprises the thinnest commonly used insulation products for any specific U-value. With a fibre-free rigid thermoset phenolic core, and a thermal conductivity of 0.018 - 0.023 W/mK, these are the most thermally efficient insulation products commonly used in internal wall applications. There are many other popular UK products such as Knauf EPS Thermal Laminate or Gyproc ThermaLine Basic Insulated Plasterboard. However meeting specified U-value requirements won’t be possible with such materials as it is low cost product based on EPS core designed only for single walls. For instance, if you insulating less than 50% of the room. All other internal insulation products would require bulkier product to be used: 120mm Celotex PIR, 150mm of Knauf® or Rockwool® Mineral Wool and 200mm of EPS100 polystyrene. It is worth to mention insulation called 10mm Sempatap Thermal Wallpaper. This type of insulation became extremely popular in the UK due to their unique ultra-thin thickness properties. Internal insulation will straightforwardly absorb sound waves and reduce vibration due to its density. Because of that, it promotes comfort and privacy, protecting people from ‘outside-to-inside’ noise such as traffic, and ‘inside-to-inside’ noise from neighbouring dwellings. If you insulate more than 50% of the internal walls of the room you need Building Regulation approval. If you live in a house with no cavity walls it is not recommended to use such insulation as it may get you damp problems. If your house was built after the 1920s, it is likely to have cavity walls.
Internal wall insulation is 50% cheaper than external wall insulation but unfortunately less effective, potentially more problematic and more disruptive. It needs careful planning as it more likely causes damp problems.
Also you should expect to lose at least 100mm on each wall when insulating interior walls. The thickness of internal wall insulation varies. You can expect it to be anywhere from 62.5mm to 200mm.
IS INTERNAL WALL INSULATION WORTH IT?
Colloquially speaking if you don't have any other options to insulate your solid wall, an internal wall insulation system is the way to go, the more so as its cost is much lower. The major advantage of internal insulation compared to other insulation methods is nothing but the insulation cost. Regardless of the manufacturer, internal wall insulation will add physical thickness to the wall, most evident at the reveals and eaves, and also will keep the wall at external ambient temperature and thereby draw the dew point towards the internal surface. To help prevent damp penetration, a vapour control layer will need to be installed. It may also disrupt things inside your property in the way that any refurbishment would, so you won't be able to easily live in the house during the work. On the other hand the internal surface of an insulated wall will be warmer. Installing internal wall insulation is better than doing nothing, for sure. You have better payback than external wall insulation, which possibly makes it worthwhile overcoming mentioned problems. Moreover, internal wall insulation grants are available as part of the Government’s Energy Company Obligation (ECO). The scheme provides grants for home owners and private renters who would otherwise be unable to afford to insulate their homes. Grants are paid for by energy companies and the scheme aims to reduce fuel poverty while also reducing carbon emissions.
INTERNAL WALL INSULATION COST
The costs given here are given in good faith as an indicative guide only and should be used with understanding. Insulationgo Limited cannot accept any liability for any budget produced using these figures.
The actual cost of internal wall insulation will vary according to the type of insulation specified. You should expect to pay anything between £10/m2 to £45/m2 and £130/m2 when a new stud wall is built. In terms of m2 coverage cost internal insulation can be classified in particular order:
But when it comes to performance the list takes the following form:
Phenolic Boards Insulation - Thermal Conductivity of 0.018W/mK
PIR Rigid Insulation Boards - Thermal Conductivity of 0.022W/mK
Rock wool Insulation - Thermal Conductivity of 0.035W/mK
Fibreglass Insulation - Thermal Conductivity of 0.044W/mK
Sempatap thermal wallpaper - Thermal Conductivity of 0.194W/mK
TYPES OF INTERNAL WALL INSULATION
Depending on the available space and your budget you can choose between 6 types of internal wall insulation.
1. PHENOLIC INSULATED PLASTERBOARD
Phenolic insulation bonded to plasterboard is a premium performance, factory-bonded wallboard to a fibre-free rigid thermoset phenolic core insulant. It provides a level of performance that is unrivalled in the world of rigid thermoset insulation materials with a thermal conductivity of just 0.018 W/mK across all thicknesses. Manufactured with a blowing agent that has zero ODP and low GWP, it is an insulated plasterboard for mechanically fixed and adhesively bonded insulated dry-lining. Provides internal dry lining and insulation in just one fixing operation, giving faster completion times. Boards provide exceptional thermal performance for both new build and refurbishment projects. Can be plastered with either Thistle Board Finish or Thistle MultiFinish plaster. All boards are easily applicable measuring 2400mm x 1200mm. Depending on the design, you can choose from various brands. All of the brands offer a variety of sizes and thicknesses. Kingspan Kooltherm K118 and its alternative Xtratherm Safe-R SR/TB insulated boards are the most effective type of rigid phenolic insulation boards currently available in the UK.
Cost: £35.42/m² (ex VAT) 62.5mm, £25/m² installation Disadvantages: expensive to buy, causes pipework corrosion.
2. THIN THERMAL WALLPAPER
Sempatap Thermal solid wall insulation is a 10mm thick roll of insulation manufactured from latex foam that’s faced with a coated woven fiberglass layer. It’s been used in many applications by local housing authorities, private landlords and homeowners to minimise their energy bill and improve the thermal performance of their home. Sempatap thermal has been tested by numerous organisations including the National Physical Laboratory whose results showed that it will reduce the ‘u’ value (coldness) of a wall by nearly 30%. Sempatap thermal not only has outstanding thermal performance but can also be used as acoustic insulation on walls and ceilings. It is easy and quick to install and the economic solution for insulating your home to reduce heat loss and lower your heating bills. It is applied much like wallpaper. Since it’s only 10mm thick there’s no need to fiddle with extending services. On a standard solid 9 inch brick wall, Sempatap Thermal can make the wall up to 30% more efficient offering thermal resistance of 0.194W/mK
Product:
Sempatap Thermal Wallpaper
Cost: £22.80/m2 (ex VAT) 10mm, £16/m² installation Disadvantages: expensive to buy
3. PIR INSULATED PLASTERBOARDS
PIR insulation bonded to plasterboard is a high performance, easy to install polyisocyanurate insulation board, laminated to a piece of 12.5mm or 9.5mm tapered edge plasterboard. These insulated plasterboards also incorporate an integral vapour control layer, which helps to reduce the risk of condensation. Moreover, it provides a continuous layer of thermal insulation across studs in timber frame walls removing the ‘thermal shorts’ that occur at the framing which can reduce the insulation value of a conventional wall by up to 20%. Designed to achieve excellent thermal u-value where minimal cavity is required giving buildings continued thermal efficiency throughout their life span. In terms of thermal conductivity, panels can be classified as a middle class product offering 0.022W/mk. They are easy to handle and quick to install. All boards are easily applicable measuring 2400mm x 1200mm. Boards can be fixed with plasterboard screws or even adhesive, making it an easier option. The thermal laminates boards are suitable for direct bonding ('dot and dab') and mechanically fixed installation techniques. Therefore it has been incredibly popular due to installation time and cost. The ability to install quickly is a huge advantage. This 2 in 1 product brings a whole host of benefits to your home. Starting from low labour costs to low heating bills. Future costs will be kept down due to the energy efficiency of Thermal Plasterboard. In fact, 72.5mm Celotex PIR core insulated plasterboard turned out to be a great alternative to phenolic core 62.5mm Kingspan Kooltherm K118.
Cost: £24.15/m² (ex VAT) 62.5mm, £16/m² installation Disadvantages: expensive to buy
4. EPS INSULATED PLASTERBOARD
EPS insulated plasterboard so called "Thermal laminate" or "Thermal basic" is a combination of a 9.5mm gypsum based wallboard, strongly bonded to expanded polystyrene (EPS) insulant that can be used internally in new build and refurbishment projects requiring a basic thermal upgrade. These types of panels are often associated with the brands such as British Gypsum, Knauf or Warmline. All brands offer thinnest insulated plasterboard as thin as 22mm thick and offer certified thermal conductivity of 0.038W/mK. Those types of insulation are no doubt the best available options in the UK. They are quick and easy to install measuring in length 2400mm and 1200mm in width. Omitting all the details it can be said that they were all designed to be a simple and effective way to improve the thermal efficiency in both walls and roof applications.
Cost: £16.31/m² (ex VAT) 40mm, £16/m² installation Disadvantages: suitable only where the basic level of performance is required
5. FIBREGLASS INTERNAL WALL INSULATION ROLL
Fibreglass insulation is essentially an insulating material that is built into your internal side of your wall. Glass wool is one of the most popular insulation used to insulate walls internally. It is probably the most common and non-combustible type of insulation used to insulate a wall from inside, however it’s itchy and gets everywhere with very little effort. If the insulation gets wet, you will need to replace it a soon as possible. To get decent thermal performance, you need a lot of insulation rolls which can quickly eat into your room space. However, it is the cheapest and most favoured option. This is one of the most popular types of insulation, mainly due to the fact it’s been around for so long and is widely available from most building merchants such as Screwfix, B&Q or Wickes. Being lightweight, it has a good thermal conductivity of 0.044 W/mK.
Cost: £2.96/m² (ex VAT) 100mm, £16/m² installation Disadvantages: irritating during installation, takes a lot of space.
6. ROCKWOOL INTERNAL WALL INSULATION
Rockwool wall insulation is manufactured in sheets that are pre-cut to fit between wall timber frame construction. Boards will boost thermal performance and improve acoustics. Slabs are provided in sizes that are easily transportable and good for handling measuring 1200mm x 600mm. Rockwool and Knauf are main players in the UK market. General-purpose rock wool insulation boards such as RWA45, RW5 or RW3 are perfect for internal wall applications. Range slabs include the following thicknesses:
25mm ǀ 30mm ǀ 40mm ǀ 50mm ǀ 60mm ǀ 75mm ǀ 90mm ǀ 100mm
Cost: £10.51/m² (ex VAT) 100mm, £19/m² installation Disadvantages: irritating during installation, if any moisture settles in the insulation fabric it will eventually rot.
INTERNAL WALL INSULATION INSTALLATION
There are 4 basic methods of installing internal wall insulation. The most commonly used method is the insulated plasterboard Dot & Dab method. The installation process involves nothing but plasterboard adhesive. There are no physical holes left after this installation. Sheet stays originally flat with the paper coating intact. This method uses either British Gypsum Adhesive or Knauf Plasterboard Adhesive. Generally speaking, Dot & Dab methods tend to be 3 times faster to install as it takes between three and six hours to set, which means you could carry out jointing or skimming the same day. In contrast, plaster takes two to three days to dry. Second technique of fixing insulated plasterboard is called the standard timber method. In this particular situation, you should always mechanically fix wooden battens and screw the plasterboard to battens. This technique requires plasterboard screws, plasterboard wall plugs or other fixings in order to be ready to finish.
Metal frame is also considered to be one of the quickest options to insulate your internal walls. It is built to form a partition wall, offering flexibility to the layout of the space. Steel frame method offer strength and longevity that insulated plasterboard can’t compare with. Insulating the frame and particularly over the frame as well as between the joints stops thermal transfer. This makes the building more comfortable and energy efficient for the occupants.
There is also another method that has been in use in the UK and Europe for years. In fact, has been successfully installed in 1,000’s of flats and houses by Local Authorities, Housing Associations, private Landlords and homeowners. This remarkable thermal insulation is called 10mm Sempatap Thermal Wallpaper. Thermal wallpaper works by slowing down the rate at which cold walls soak up heat energy. Consequently, it insulates rooms considerably faster, in many cases increasing warm-up times by 65%. Thanks to its thickness, expertly blended material and advanced aerospace technology, this warmth is easily maintained even in the harshest weather conditions.
146mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one s..
146mm Unilin FR/TP Warm Roof Insulation Decking is used for new and refurbishment flat roof applications, made of 140mm Unilin PIR rigid foam insulation core bonded to 6mm WBP grade plywood.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight foil facer..
146mm Unilin FR/TP Warm Roof PIR Ply Insulation Board Decking
Used for new build and refurbishment flat roof applications
Creates a continuous Vapour Control Layer (Vapour Barrier)
PIR foam insulation core and 6mm plywood insulated decking
Unilin FR/TP Thermal ply flat roof insulation over joists board
150mm Xtratherm Thin-R is a rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for all types of small and large projects.
Thin-R Rigid Insulation Board (2400mm x 1200mm x 150mm) is a multi-application product designed for roofs, walls, floors, timber and steel framed s..
159mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocya..
72.5mm Xtratherm XT/TL Thermal Liner PIR Insulated Plasterboard (Dot and Dab) is an excellent insulated panel combined of polyisocyanurate foam insulation core bonded to 12.5mm plasterboard, used for internal applications, fixed with adhesive.
Xtratherm XT/TL Drylining Board is a highly versatile..
72.5mm Xtratherm XT/TL-MF Thermal Liner Insulated Plasterboard is made up of PIR insulation core bonded to 12.5mm plasterboard designed to provide thermal insulation and vapour barrier for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board i..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
74.5mm (65mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 65mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
65mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
74.5mm (75mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
74.5mm (75mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 65mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ti..
74.5mm (75mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
150mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 2..
150mm Unilin XT/PR is a pitched roof insulation board with rigid PIR foam core sandwiched between low emissivity foil facings used for under rafter or between and over joist applications.
XT/PR Thin-R is a high performance foil faced insulation foam board with a certified thermal conductivity of ..
150mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
150mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
150mm Unilin XT/TF Thermal Foam Insulation Board is comprising a rigid PIR core sandwiched between foil facings designed to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity of 0.022..
150mm Unilin Thin-R XT/UF PIR Floor Board is a rigid foam insulation board used below the screed, in block and beam floors, concrete slab floors or beneath concrete and for supporting floating floors.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal cond..
150mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
150mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
156mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one s..
156mm Unilin FR/TP Flat Roof Insulation Board is a composite insulated decking board made of 140mm PIR insulation core bonded to 6mm plywood used for new and refurbishment flat roof applications.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight foil ..
156mm Unilin FR/TP Warm Roof PIR Ply Insulation Board Decking
Used for new build and refurbishment flat roof applications
Creates a continuous Vapour Control Layer (Vapour Barrier)
PIR foam insulation core and 6mm plywood insulated decking
Unilin FR/TP Thermal ply flat roof insulation over joists board
165mm Xtratherm Thin-R is a rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for all types of small and large projects.
Thin-R Rigid Insulation Board (2400mm x 1200mm x 165mm) is a multi-application product designed for roofs, walls, floors, timber and steel framed s..
174mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocya..
74.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
74.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner is an insulated panel combined of PIR insulation foam core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Boa..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
77.5mm (65mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 65mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
65mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
77.5mm (78mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
77.5mm (78mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 65mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
77.5mm (78mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
160mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 2..
165mm Floor Board Unilin Thin-R XT/UF PIR Rigid Foam Insulation is used below the screed, in block and beam floors, concrete slab floors or beneath concrete and for supporting floating floors.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity..
165mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
165mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
165mm Unilin XT/PR is the thickest roof insulation board with rigid PIR foam core sandwiched between low emissivity foil facings used for under rafter or between and over joist applications.
XT/PR Thin-R is a high performance foil faced insulation foam board with a certified thermal conductivity ..
165mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
165mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
165mm Unilin Thin-R XT/TF is the thickest wall insulation board with rigid PIR foam core sandwiched between aluminium foil facings used between studs or as an insulating sheathing material.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal cond..
171mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one s..
171mm Unilin FR/TP Flat Roof Insulation Decking is a 165mm PIR rigid foam insulation core and 6mm Plywood composite insulated decking board used for new and refurbishment flat roof applications.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight foil f..
171mm Unilin FR/TP Warm Roof PIR Ply Insulation Board Decking
Used for new build and refurbishment flat roof applications
Creates a continuous Vapour Control Layer (Vapour Barrier)
PIR foam insulation core and 6mm plywood insulated decking
Unilin FR/TP Thermal ply flat roof insulation over joists board
77.5mm Xtratherm XT/TL Thermal Liner Dot and Dab is a high-quality insulated plasterboard combined of PIR insulation foam core bonded to 12.5mm plasterboard used for internal applications, fixed with adhesive dot & dab direct bonding.
Xtratherm XT/TL Drylining Board is a highly versatile and dura..
77.5mm Xtratherm XT/TL-MF Thermal Liner Insulated Plasterboard is a 65mm PIR insulation foam core bonded to 12.5mm plasterboard designed to provide thermal insulation and vapour barrier for walls, sloped roofs and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed is a highly versatile and durable ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
79.5mm (70mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 70mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
70mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
79.5mm (80mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
79.5mm (80mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 70mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ti..
79.5mm (80mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
170mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 2..
79.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
79.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation and dry lining in one operation that is suitable for internal masonry ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
82.5mm (70mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 70mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
70mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
82.5mm (83mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
82.5mm (83mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 70mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
82.5mm (83mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
180mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 2..
82.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
82.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is a 70mm PIR insulation foam core bonded to 12.5mm plasterboard designed to thermal insulation for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a hig..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
84.5mm (75mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 75mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
75mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
84.5mm (85mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
84.5mm (85mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 75mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ti..
84.5mm (85mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
190mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 2..
84.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct b..
84.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation and dry lining in one operation that is suitable for internal masonry ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
87.5mm (75mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 75mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
75mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
87.5mm (88mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
87.5mm (88mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 75mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
87.5mm (88mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
200mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 2..
87.5mm Xtratherm XT/TL Thermal Liner Dot and Dab is an insulated plasterboard combined of PIR insulation foam core bonded to 12.5mm plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct bonding.
Xtratherm XT/TL Drylining Board is a highly versatile and dura..
87.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is a 75mm PIR rigid insulation core bonded to 12.5mm plasterboard designed for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly versatile and dur..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
89.5mm (80mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 80mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
80mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
89.5mm (90mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
89.5mm (90mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 80mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ti..
89.5mm (90mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
89.5mm Xtratherm XT/TL Thermal Liner Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm tapered edge plasterboard that is suitable for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile a..
89.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation and dry lining in one operation that is suitable for internal masonry ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
92.5mm (80mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 80mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer an..
80mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
92.5mm (93mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
92.5mm (93mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 80mm PIR foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
92.5mm (93mm) Unilin XT/TL-MF Foil Backed PIR Insulated Plasterboard
Provides a gas and vapour tight barrier, reducing the condensation risk
Suitable for a variety of wall types for both refurbishment and new build
Used for internal walls, sloped roofs and ceiling applications
Improves energy efficiency of your home by reducing energy costs
92.5mm Xtratherm XT/TL Thermal Liner Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 12.5mm plasterboard that is suitable for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable t..
92.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is a 80mm PIR rigid insulation foam core bonded to 12.5mm plasterboard suitable for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Board is a highly versatile and durable ..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
99.5mm (90mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 90mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and..
90mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
99.5mm (100mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
99.5mm (100mm) Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 90mm PIR foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour t..
102.5mm (90mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 90mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer a..
90mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
102.5mm (103mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
102.5mm Unilin XT/TL-MF (Mech Fix) is an insulated plasterboard made of 90mm PIR rigid foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight barrie..
99.5mm Xtratherm XT/TL Thermal Liner Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm tapered edge plasterboard used for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable t..
99.5mm Xtratherm XT/TL-MF Thermal Liner Insulated Plasterboard is a 90mm PIR insulation core bonded to 9.5mm plasterboard designed to provide high levels of thermal insulation and dry lining for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining B..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
102.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 12.5mm tapered edge plasterboard.
Xtratherm XT/TL Drylining Board is a highly versatile and durable thermal insulated pl..
102.5mm Xtratherm XT/TL-MF Thermal Liner Mech Fix Insulated Plasterboard is made up of 90mm PIR insulation core bonded to 12.5mm plasterboard designed to provide high levels of thermal insulation and vapour barrier for walls and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Unilin Board is a hi..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
109.5mm (100mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 100mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer ..
100mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
109.5mm (110mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
109.5mm Unilin XT/TL-MF (Mech Fix) is an insulated plasterboard made of 100mm PIR rigid foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight barrie..
109.5mm Xtratherm XT/TL Thermal Liner Dot and Dab is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm tapered edge plasterboard that used for internal applications, fixed with adhesive dot & dab direct bonding.
Xtratherm XT/TL Drylining Board is a highly versatile and..
109.5mm Xtratherm XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is an insulated panel combined of 100mm PIR rigid insulation foam core bonded to 9.5mm plasterboard, used for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
112.5mm (100mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 100mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer..
100mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
112.5mm (113mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
112.5mm Unilin XT/TL-MF (Mech Fix) is an insulated plasterboard made of 100mm PIR rigid foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight barri..
112.5mm Xtratherm XT/TL Insulated Plasterboard Dot and Dab is an insulated panel combined of PIR rigid insulation foam core bonded to 12.5mm plasterboard used for internal applications, fixed with adhesive dot & dab direct bonding.
Xtratherm XT/TL Drylining Board is a highly versatile and durable..
112.5mm Xtratherm (Unilin) XT/TL-MF Thermal Liner Insulated Plasterboard is made up of 100mm PIR insulation foam core bonded to 12.5mm plasterboard to provide thermal insulation and vapour barrier for walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a h..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
119.5mm (110mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 110mm PIR insulation bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer ..
110mm PIR rigid foam insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
119.5mm (120mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
119.5mm (120mm) Unilin XT/TL-MF is an insulated plasterboard made of 110mm PIR rigid foam insulation core bonded to 9.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight barrier, ..
119.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot and Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm plasterboard used for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable t..
119.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix Composite Drylining Board is a 110mm PIR insulation foam core bonded to 9.5mm plasterboard designed to provide thermal insulation and dry lining in one operation that is suitable for internal masonry walls, sloped rafters and ceilings.
Xtra..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
122.5mm (110mm) Unilin XT/TL Thermal Liner is a composite insulated plasterboard made of 110mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer..
110mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
122.5mm (123mm) Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
122.5mm Unilin XT/TL-MF is a foil backed insulated plasterboard made of 110mm PIR rigid foam insulation core bonded to 12.5mm plasterboard used for internal walls, roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour tight barri..
122.5mm Xtratherm XT/TL-MF Thermal Liner Mech Fix Insulated Palsterboard consist of 110mm PIR rigid insulation foam core bonded to 12.5mm plasterboard, used for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Unilin Board is a highly versatile and dura..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
122.5mm Xtratherm XT/TL Thermal Liner Insulated Plasterboard Dot and Dab is an excellent insulated panel combined of 110mm PIR rigid foam insulation core bonded to 12.5mm plasterboard used for internal applications.
Xtratherm XT/TL Drylining Board is a highly versatile and durable thermal insulat..