Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Internal wall insulation is an economic and alternative way to insulate solid masonry wall with inner insulation designed to increase the thermal performance and improve its airtightness. Most often it requires the use of PIR rigid boards, phenolic boards or rock wool roll. The thickness of insulation needed to insulate the wall internally strongly depends on the specific U-value that you want to achieve. A lower figure means better thermal performance. Current Building Regulations require a maximum U-value of 0.3W/m2 for existing buildings (0.16W/m2 for new buildings). Achieving that U-value for solid walls will mean installing at least 120mm of Kingspan, Xtratherm or Celotex rigid insulation. However, Kingspan Kooltherm® K118 is the most commonly used insulating material that meets current U-value requirements with just 50mm (62.5mm) thickness. Since is only 50mm thick it is a top-class three-in-one product for internal wall insulation used as mechanically fixed and adhesively bonded 'dot and dab' insulated plasterboard. The Kingspan Kooltherm K-range comprises the thinnest commonly used insulation products for any specific U-value. With a fibre-free rigid thermoset phenolic core, and a thermal conductivity of 0.018 - 0.023 W/mK, these are the most thermally efficient insulation products commonly used in internal wall applications. There are many other popular UK products such as Knauf EPS Thermal Laminate or Gyproc ThermaLine Basic Insulated Plasterboard. However meeting specified U-value requirements won’t be possible with such materials as it is low cost product based on EPS core designed only for single walls. For instance, if you insulating less than 50% of the room. All other internal insulation products would require bulkier product to be used: 120mm Celotex PIR, 150mm of Knauf® or Rockwool® Mineral Wool and 200mm of EPS100 polystyrene. It is worth to mention insulation called 10mm Sempatap Thermal Wallpaper. This type of insulation became extremely popular in the UK due to their unique ultra-thin thickness properties. Internal insulation will straightforwardly absorb sound waves and reduce vibration due to its density. Because of that, it promotes comfort and privacy, protecting people from ‘outside-to-inside’ noise such as traffic, and ‘inside-to-inside’ noise from neighbouring dwellings. If you insulate more than 50% of the internal walls of the room you need Building Regulation approval. If you live in a house with no cavity walls it is not recommended to use such insulation as it may get you damp problems. If your house was built after the 1920s, it is likely to have cavity walls.
Internal wall insulation is 50% cheaper than external wall insulation but unfortunately less effective, potentially more problematic and more disruptive. It needs careful planning as it more likely causes damp problems.
Also you should expect to lose at least 100mm on each wall when insulating interior walls. The thickness of internal wall insulation varies. You can expect it to be anywhere from 62.5mm to 200mm.
IS INTERNAL WALL INSULATION WORTH IT?
Colloquially speaking if you don't have any other options to insulate your solid wall, an internal wall insulation system is the way to go, the more so as its cost is much lower. The major advantage of internal insulation compared to other insulation methods is nothing but the insulation cost. Regardless of the manufacturer, internal wall insulation will add physical thickness to the wall, most evident at the reveals and eaves, and also will keep the wall at external ambient temperature and thereby draw the dew point towards the internal surface. To help prevent damp penetration, a vapour control layer will need to be installed. It may also disrupt things inside your property in the way that any refurbishment would, so you won't be able to easily live in the house during the work. On the other hand the internal surface of an insulated wall will be warmer. Installing internal wall insulation is better than doing nothing, for sure. You have better payback than external wall insulation, which possibly makes it worthwhile overcoming mentioned problems. Moreover, internal wall insulation grants are available as part of the Government’s Energy Company Obligation (ECO). The scheme provides grants for home owners and private renters who would otherwise be unable to afford to insulate their homes. Grants are paid for by energy companies and the scheme aims to reduce fuel poverty while also reducing carbon emissions.
INTERNAL WALL INSULATION COST
The costs given here are given in good faith as an indicative guide only and should be used with understanding. Insulationgo Limited cannot accept any liability for any budget produced using these figures.
The actual cost of internal wall insulation will vary according to the type of insulation specified. You should expect to pay anything between £10/m2 to £45/m2 and £130/m2 when a new stud wall is built. In terms of m2 coverage cost internal insulation can be classified in particular order:
But when it comes to performance the list takes the following form:
Phenolic Boards Insulation - Thermal Conductivity of 0.018W/mK
PIR Rigid Insulation Boards - Thermal Conductivity of 0.022W/mK
Rock wool Insulation - Thermal Conductivity of 0.035W/mK
Fibreglass Insulation - Thermal Conductivity of 0.044W/mK
Sempatap thermal wallpaper - Thermal Conductivity of 0.194W/mK
TYPES OF INTERNAL WALL INSULATION
Depending on the available space and your budget you can choose between 6 types of internal wall insulation.
1. PHENOLIC INSULATED PLASTERBOARD
Phenolic insulation bonded to plasterboard is a premium performance, factory-bonded wallboard to a fibre-free rigid thermoset phenolic core insulant. It provides a level of performance that is unrivalled in the world of rigid thermoset insulation materials with a thermal conductivity of just 0.018 W/mK across all thicknesses. Manufactured with a blowing agent that has zero ODP and low GWP, it is an insulated plasterboard for mechanically fixed and adhesively bonded insulated dry-lining. Provides internal dry lining and insulation in just one fixing operation, giving faster completion times. Boards provide exceptional thermal performance for both new build and refurbishment projects. Can be plastered with either Thistle Board Finish or Thistle MultiFinish plaster. All boards are easily applicable measuring 2400mm x 1200mm. Depending on the design, you can choose from various brands. All of the brands offer a variety of sizes and thicknesses. Kingspan Kooltherm K118 and its alternative Xtratherm Safe-R SR/TB insulated boards are the most effective type of rigid phenolic insulation boards currently available in the UK.
Cost: £35.42/m² (ex VAT) 62.5mm, £25/m² installation Disadvantages: expensive to buy, causes pipework corrosion.
2. THIN THERMAL WALLPAPER
Sempatap Thermal solid wall insulation is a 10mm thick roll of insulation manufactured from latex foam that’s faced with a coated woven fiberglass layer. It’s been used in many applications by local housing authorities, private landlords and homeowners to minimise their energy bill and improve the thermal performance of their home. Sempatap thermal has been tested by numerous organisations including the National Physical Laboratory whose results showed that it will reduce the ‘u’ value (coldness) of a wall by nearly 30%. Sempatap thermal not only has outstanding thermal performance but can also be used as acoustic insulation on walls and ceilings. It is easy and quick to install and the economic solution for insulating your home to reduce heat loss and lower your heating bills. It is applied much like wallpaper. Since it’s only 10mm thick there’s no need to fiddle with extending services. On a standard solid 9 inch brick wall, Sempatap Thermal can make the wall up to 30% more efficient offering thermal resistance of 0.194W/mK
Product:
Sempatap Thermal Wallpaper
Cost: £22.80/m2 (ex VAT) 10mm, £16/m² installation Disadvantages: expensive to buy
3. PIR INSULATED PLASTERBOARDS
PIR insulation bonded to plasterboard is a high performance, easy to install polyisocyanurate insulation board, laminated to a piece of 12.5mm or 9.5mm tapered edge plasterboard. These insulated plasterboards also incorporate an integral vapour control layer, which helps to reduce the risk of condensation. Moreover, it provides a continuous layer of thermal insulation across studs in timber frame walls removing the ‘thermal shorts’ that occur at the framing which can reduce the insulation value of a conventional wall by up to 20%. Designed to achieve excellent thermal u-value where minimal cavity is required giving buildings continued thermal efficiency throughout their life span. In terms of thermal conductivity, panels can be classified as a middle class product offering 0.022W/mk. They are easy to handle and quick to install. All boards are easily applicable measuring 2400mm x 1200mm. Boards can be fixed with plasterboard screws or even adhesive, making it an easier option. The thermal laminates boards are suitable for direct bonding ('dot and dab') and mechanically fixed installation techniques. Therefore it has been incredibly popular due to installation time and cost. The ability to install quickly is a huge advantage. This 2 in 1 product brings a whole host of benefits to your home. Starting from low labour costs to low heating bills. Future costs will be kept down due to the energy efficiency of Thermal Plasterboard. In fact, 72.5mm Celotex PIR core insulated plasterboard turned out to be a great alternative to phenolic core 62.5mm Kingspan Kooltherm K118.
Cost: £24.15/m² (ex VAT) 62.5mm, £16/m² installation Disadvantages: expensive to buy
4. EPS INSULATED PLASTERBOARD
EPS insulated plasterboard so called "Thermal laminate" or "Thermal basic" is a combination of a 9.5mm gypsum based wallboard, strongly bonded to expanded polystyrene (EPS) insulant that can be used internally in new build and refurbishment projects requiring a basic thermal upgrade. These types of panels are often associated with the brands such as British Gypsum, Knauf or Warmline. All brands offer thinnest insulated plasterboard as thin as 22mm thick and offer certified thermal conductivity of 0.038W/mK. Those types of insulation are no doubt the best available options in the UK. They are quick and easy to install measuring in length 2400mm and 1200mm in width. Omitting all the details it can be said that they were all designed to be a simple and effective way to improve the thermal efficiency in both walls and roof applications.
Cost: £16.31/m² (ex VAT) 40mm, £16/m² installation Disadvantages: suitable only where the basic level of performance is required
5. FIBREGLASS INTERNAL WALL INSULATION ROLL
Fibreglass insulation is essentially an insulating material that is built into your internal side of your wall. Glass wool is one of the most popular insulation used to insulate walls internally. It is probably the most common and non-combustible type of insulation used to insulate a wall from inside, however it’s itchy and gets everywhere with very little effort. If the insulation gets wet, you will need to replace it a soon as possible. To get decent thermal performance, you need a lot of insulation rolls which can quickly eat into your room space. However, it is the cheapest and most favoured option. This is one of the most popular types of insulation, mainly due to the fact it’s been around for so long and is widely available from most building merchants such as Screwfix, B&Q or Wickes. Being lightweight, it has a good thermal conductivity of 0.044 W/mK.
Cost: £2.96/m² (ex VAT) 100mm, £16/m² installation Disadvantages: irritating during installation, takes a lot of space.
6. ROCKWOOL INTERNAL WALL INSULATION
Rockwool wall insulation is manufactured in sheets that are pre-cut to fit between wall timber frame construction. Boards will boost thermal performance and improve acoustics. Slabs are provided in sizes that are easily transportable and good for handling measuring 1200mm x 600mm. Rockwool and Knauf are main players in the UK market. General-purpose rock wool insulation boards such as RWA45, RW5 or RW3 are perfect for internal wall applications. Range slabs include the following thicknesses:
25mm ǀ 30mm ǀ 40mm ǀ 50mm ǀ 60mm ǀ 75mm ǀ 90mm ǀ 100mm
Cost: £10.51/m² (ex VAT) 100mm, £19/m² installation Disadvantages: irritating during installation, if any moisture settles in the insulation fabric it will eventually rot.
INTERNAL WALL INSULATION INSTALLATION
There are 4 basic methods of installing internal wall insulation. The most commonly used method is the insulated plasterboard Dot & Dab method. The installation process involves nothing but plasterboard adhesive. There are no physical holes left after this installation. Sheet stays originally flat with the paper coating intact. This method uses either British Gypsum Adhesive or Knauf Plasterboard Adhesive. Generally speaking, Dot & Dab methods tend to be 3 times faster to install as it takes between three and six hours to set, which means you could carry out jointing or skimming the same day. In contrast, plaster takes two to three days to dry. Second technique of fixing insulated plasterboard is called the standard timber method. In this particular situation, you should always mechanically fix wooden battens and screw the plasterboard to battens. This technique requires plasterboard screws, plasterboard wall plugs or other fixings in order to be ready to finish.
Metal frame is also considered to be one of the quickest options to insulate your internal walls. It is built to form a partition wall, offering flexibility to the layout of the space. Steel frame method offer strength and longevity that insulated plasterboard can’t compare with. Insulating the frame and particularly over the frame as well as between the joints stops thermal transfer. This makes the building more comfortable and energy efficient for the occupants.
There is also another method that has been in use in the UK and Europe for years. In fact, has been successfully installed in 1,000’s of flats and houses by Local Authorities, Housing Associations, private Landlords and homeowners. This remarkable thermal insulation is called 10mm Sempatap Thermal Wallpaper. Thermal wallpaper works by slowing down the rate at which cold walls soak up heat energy. Consequently, it insulates rooms considerably faster, in many cases increasing warm-up times by 65%. Thanks to its thickness, expertly blended material and advanced aerospace technology, this warmth is easily maintained even in the harshest weather conditions.
40mm Promat PROMATECT-MST Fire Protection Board is a high-performance class A1, non-combustible insulation board used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST is an effective and stable fire insulation solution for..
40mm Promat PROMATECT®-MST A1 Fire Resistant Board
Stable fire insulation solution for demanding applications
High strength even when exposed to high temperature of 1000ºC
Fire insulation board with up to 240min fire resistance (protection)
Insulation in ovens and dryers, Heat shield, Structural thermal break
40mm Promat VERMICULUX-S Calcium Silicate Fire Insulation Board is used where the fire protection system is in full view and where it is hidden, VERMICULUX-S provides up to 240 minutes fire protection to structural steel applications.
VERMICULUX-S is used to protect one, two, three or four sided ..
41mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one so..
41mm Unilin FR/TP Warm Roof Insulation Decking Board is used for new and refurbishment flat roof applications, made of 35mm PIR rigid foam insulation core bonded to 6mm WBP grade plywood.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight foil facer, b..
41mm Unilin FR/TP Warm Roof PIR Ply Insulation Board Decking
Used for new build and refurbishment flat roof applications
Creates a continuous Vapour Control Layer (Vapour Barrier)
PIR foam insulation core and 6mm plywood insulated decking
Unilin FR/TP Thermal ply flat roof insulation over joists board
44mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
45mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 24..
47.5mm Celotex PL4000 Insulated Plasterboard (PL4035) is a high-performance PIR (polyisocyanurate) rigid insulation foam board bonded to 12.5mm tapered edge wallboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists) and internal wall lining applications...
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
47.5mm (48mm) XT/TL-FR is an insulated plasterboard made of 35mm Unilin PIR insulation core bonded to 12.5mm fire plasterboard used in dry lining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single l..
47.5mm (35mm) XT/TL-FR Fire Resistant Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
47.5mm (48mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 35mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal..
Xtratherm XT/TL-MR Thermaliner Moisture Resistant is a 47.5mm insulated plasterboard combined of PIR insulation foam core bonded to 12.5mm green moisture resistant plasterboard designed for internal building areas of high humidity conditions.
XT/TL-MR Thermal Liner Thin-R is designed to improve m..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
50mm Kingspan Thermapitch TP10 PIR Insulation Board is a high performance pitched roof insulation board with certified thermal conductivity of 0.022 W/m.K used for under rafter or between and over joist applications.
Thermapitch TP10 Kingspan PIR 2400mm x 1200mm x 50mm is an insulation board suit..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES
50mm Kingspan Thermawall TW55 Insulation Sheet is used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Thermawall TW55 Kingspan PIR 2400mm x 1200mm x 50mm is a high performance insulation board suitable for use with timber frame and steel frame..
50mm Monolux 800 Fire Protection Board Promat (MST 800) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 800 High Performance Board 50mm is a special, tough and dur..
Monolux 800 - providing up to 240 minutes Fire Resistance
MST-800 - 1000°C - Easy to Decorate with Paints, Wallpapers or Tiles
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
50mm PROMATECT L500 Fire Protection Board is a versatile non-combustible low density calcium silicate fire rated board, used for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
Promat L500 PROMATECT 50mm is off white ..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
50mm Kingspan TF70 Floor Insulation Board is a PIR fibre-free rigid thermoset foam insulation board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
Thermafloor TF70 Kingspan PIR 2400mm x 1200mm x 50mm is suitable for use below the screed, in b..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS
55mm Unilin Thin-R XT/CW Insulation Board is a robust tongue and groove jointing partial fill cavity insulation board, ensuring cavity wall insulation continuity and minimisation of thermal bridging.
Unilin Cavity Wall (T&G) tongue and groove jointing offers a practical onsite solution that resul..
55mm Unilin Thin-R XT/CW Partial Fill Cavity Wall Insulation Board
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CW improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
60mm Black Foil Faced Rocksilk Knauf RS45 Insulation Slab is made from non-combustible Euroclass A1 fire rated rock mineral wool insulation used mainly for concrete soffits.
Knauf RS45 1200mm x 600mm x 60mm black foil backed slab provides outstanding fire, thermal and acoustic performance for bot..
60mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
60mm Two Sides Black Foil Faced Rocksilk Knauf RS45 Insulation Slab is made from non-combustible class A1 fire rated rock mineral wool insulation used mainly for concrete soffits.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both ..
60mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
60mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 60mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
60mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 60mm foil backed slab pr..
60mm PROMASIL®-1000L Promat Fire Protection Board is an extremely low thermal conductivity, lightweight calcium-silicate insulation board with very good thermal stability up to 1000°C, used in various industrial applications.
PROMASIL-1000L Boards are often used in heavy industry for anode baking..
60mm PROMASIL-1100 SUPER Promat Fire Board is an extra low thermal conductivity calcium-silicate fire insulation board with very good thermal stability up to 1050°C, used in the fireplaces and wood burning stoves.
Fire Insulating Board PROMASIL®-1100 SUPER is the result of combining Promat PROMAX..
60mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C
Fireplaces, Wood Burning Stoves, PROMAFOUR® fireplace systems
Very good thermal properties and thermal stability up to 1050°C
Extra low thermal conductivity calcium-silicate fire insulation board
Multiple uses in single layer systems for penetration seals in walls and slabs
60mm Recticel Eurothane General Purpose Insulation Board is an easy to cut and fit PIR rigid insulation board faced with a gas diffusion tight multilayer foil on both sides that is suitable for pitched roof, timber and steel framed walls, ceilings and floor applications.
Recticel Eurothane GP 240..
60mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material designed for use in multiple applications..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
60mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust, medium-density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Rockwool Insulati..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
60mm Rockwool RWA45 Acoustic Insulation Slab (Prorox SL920) is a robust, standard density (45kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using RWA45 Insulation ..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
Kingspan TW50 Thermawall Cavity Wall Insulation Board 60mm is a BBA certified partial fill cavity wall insulation board designed for partial fill masonry cavity walls.
Thermawall TW50 is a stable and rot proof insulation board used in newbuild or extension projects and will remain effective for t..
60mm Xtratherm XT/CW Partial Fill Cavity Wall Insulation Board is a tongue and groove PIR rigid insulation board with certified thermal conductivity of 0.022 W/mK designed for use in traditional masonry partial fill cavity walls.
XT/CW is a lightweight, easy to handle and install material which c..
Ultra Liner PIR Insulated Plasterboard 62.5mm x 1200mm x 2400mm is a cost-effective PIR rigid core thermal laminate insulation board used for walls, ceiling and pitched roof applications.
This ultimate thermal laminate insulation board provides high levels of insulation and drylining in one appli..
62.5mm x 1200mm x 2400mm PIR Insulated Plasterboard
Ultimate thermal laminate insulation board for drylining
Ultraliner is used for walls, ceiling and pitched roof applications
PIR insulation core thermal conductivity (lambda) of 0.022W/mK
Ultra Liner PIR provides an effective Vapour Control Layer (VCL)
IKO Enertherm ALU PIR Insulation Board 70mm is an easy to install rigid polyisocyanurate foam core insulation board clad on both sides with a multi-layer gas-tight aluminium foil, used on flat roofs, pitch roofs, loft floors, cavity walls, cladding and basements.
70mm IKO Enertherm ALU is a light..
70mm Terrawool TW50 Acoustic Insulation Slab (density of 50kg/m3) is a non-combustible thermal and acoustic stone wool insulation slab that is used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab 70mm is a high-performance recyclab..
75mm Celotex GA4000 PIR Insulation Board (GA4075) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for wall, floor, ceiling and roof cut-to-fit applications.
Celotex Insulation Board is an excellent h..
75mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 75mm aluminum foi..
75mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil insulation slab provide..
75mm Foil Faced on Both Sides Rocksilk RS100 Knauf Fire Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil faced two sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 75mm a..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Provides excellent fire, thermal and acoustic performance.
75mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 75mm aluminium foil insu..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
75mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
75mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) rigid non-combustible rock mineral wool insulation slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-com..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
75mm RS60 Black Foil Backed and Faced Knauf Insulation Slab is an A1 class aluminium black foil faced on both sides rock mineral wool slab with the highest possible fire rating.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy specially ..
75mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
75mm RS60 Black Foil Backed Slab comprises a 60kg/m3 density non-combustible mineral wool insulation core faced with an aluminium foil in black colour on one side.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that refle..
75mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
80mm Styrodur® 3000 CS XPS Foam Insulation Board is a high-compressive and mechanical strength (300kPa) rigid extruded polystyrene (XPS) foam insulation board with shiplap edges used for almost all applications in construction.
Styrodur® XPS 80mm comes in 1265mm long by 615mm wide sheets and is u..
80mm Xtratherm XPS 300 is a waterproof high performance rigid extruded polystyrene insulation board providing a durable thermal solution to technically demanding applications where high compressive loading of 300kPa is needed.
XPS Rigid Foam Insulation Boards are suitable for many demanding and v..
80mm Extruded Polystyrene Xtratherm XPS 300 kPa
For use in commercial, industrial and cold storage areas
Closed-cell structure, which prevents moisture-absorption
Very low lambda values and compressive loading capabilities
Xtratherm XPS Sheets are 1250mm long by 600mm wide boards
80mm Xtratherm Thin-R PLUS XT/CWP is a traditional masonry partial fill cavity wall insulation comprising a rigid Polyisocyanurate (PIR) core between low emissivity foil facings and robust tongue and groove jointing edges.
XT/CWP Cavity Wall Plus (T&G) is the best solution when building tradition..
80mm Xtratherm XT/CWP Cavity Wall Plus Insulation Board
Lower Lambda value (thermal conductivity) of 0.021 W/mK
Enhanced performance PIR (polyisocyanurate) rigid insulation
Easy to install tongue and groove (T&G) jointing system
Used as a traditional masonry partial fill cavity wall insulation
87.5mm Moisture Resistant Insulated Plasterboard Unilin SR/TB-MR is designed for dry lining in high humidity conditions, a 70mm rigid phenolic core bonded to 12.5mm moisture resistant plasterboard.
MR Insulated Drylining Board improves moisture resistance and thermal performance by reducing effec..
82.5mm SR/TB-MF Unilin is a superior performance insulated plasterboard, comprising a rigid phenolic core bonded to 12.5mm plasterboard used for dry lining internal walls, sloped roofs and ceilings.
Foil facing on both sides of SR/TB-MF incorporates an integral vapour control layer, which helps t..
82.5mm SR/TB Unilin is a superior performance insulated plasterboard, comprising a rigid phenolic core bonded to 12.5mm plasterboard used for drylining walls fixed with adhesive dabs.
The insulated drylining wall insulation Unilin Safe-R SR/TB with certified lambda value (thermal conductivity) of..
82.5mm Unilin SR/TB Insulated Plasterboard Drylining Walls (Dot and Dab)
Insulated plasterboard made of phenolic core between glass tissue/foil facings
Faced with 12.5mm plasterboard used for drylining walls fixed with adhesive dabs
Insulated drylining wall insulation Unilin Safe-R SR/TB lambda value of 0.020 W/mK
SR/TB Providing the solution of choice in new build and refurbishment projects
87.5mm Safe-R SR/TB Thermal Liner Xtratherm Insulated Plasterboard is a combination of 75mm premium phenolic foam insulation core with a composite foil facing bonded to 12.5mm tapered edge plasterboard for drylining internal walls.
Safe-R Xtratherm SR/TB Thermal Liner range is a high-efficiency t..
BBA Certification No.10/4803.
Integral Vapour (Check) Control Layer
Reaction to Fire Euroclass B-s1, d0
Suitable for Newbuild and Renovation Projects
High levels of insulation and drylining in one fix
90mm Xtratherm Xtroliner XO/CW is an improved performance PIR (polyisocyanurate) tongue and groove insulation board with robust foil facings designed for partial fill cavity wall insulation with an approved thermal conductivity (lambda value) as low as 0.021W/mK.
This lower lambda improves U-Valu..
93mm Gyproc Thermaline PIR MR British Gypsum Insulated Plasterboard is an insulated dry lining laminate consists of a 12.5mm Moisture Resistant plasterboard bonded to a 80.5mm PIR foam core with an aluminium and water repellent kraft facings on both sides of the insulation board.
BG Moisture Resi..
British Gypsum Gyproc Thermaline PIR MR
93mm Moisture Resistant Insulated Plasterboard
Water repellent kraft facings on both sides
Improves moisture resistance and thermal performance
93mm British Gypsum Gyproc Thermaline PIR Insulated Plasterboard is an insulated panel consists of a 12.5mm Gyproc WallBoard plasterboard bonded to a 80.5mm rigid PIR foam with a multi-layer kraft and aluminium foil facings on both sides.
Gyproc Thermaline PIR 93mm is a smart and cost-effective 2..
93mm Gyproc ThermaLine PIR Insulated Plasterboard
Multi-layer kraft aluminium facings on both sides
For both refurbishment and new build projects
Simple and cost-effective 2 in 1 insulated plasterboard
Provides insulation and dry lining in one operation
Code 7 Lead Lined Plasterboard (X-Ray Resistant Board) is a lead lining sheet consisting of a high density gypsum plasterboard covered with a thin layer of lead used to provide complete radiation (x-rays) protection and safety in any environment.
X-ray Resistant Board Code 7 consists of 12.5mm st..
Code 7 Lead Lined Plasterboard Radiation Protection
High-density gypsum board covered with a thin layer of lead
Used to provide complete X-rays protection and safety
Standard 2400mm x 1200mm (8 by 4) lead lining sheet
Dental Surgeries, Veterinary Practices and Hospitals
1200x1200mm Lead Lined Plywood (Code 7) is an x-ray resistant strong plywood sheet covered with a thin layer of lead used to provide complete radiation (x-ray) protection and safety to walls, ceilings and floors in the healthcare industry.
Code 7 X-Ray Resistant Plywood Panel consisting of 12mm p..
Code 7 Lead Lined Plywood X-ray Radiation Protection
Strong plywood sheet covered with a thin layer of lead
Used to provide complete X-rays protection and safety
1200mm x 1200mm - 1.44m2 (4′ x 4′) durable lead lining sheets
Dental Surgery, Veterinary Practice, Hospital, X-ray and Diagnostic rooms
Kingspan Kooltherm K118 57.5mm Single Board is a high-quality insulation board made of a rigid foam phenolic core with foil facings, bonded to 12.5mm tapered edge gypsum plasterboard.
Kooltherm K118 range is a rigid phenolic thermoset insulation core with a certified thermal conductivity (lambda ..
57.5mm Kingspan Kooltherm K118 Insulated Plasterboard (K18 and K17)
High-quality insulation material made of a rigid phenolic core and plasterboard
Premium performance, lower lambda for internal wall insulation projects
Unbeatable insulated plasterboard with no equivalent to K118 thermal performance
Premium performance insulation board - thermal conductivity of 0.019 W/mK
Kingspan Kooltherm K112 Framing Board 100mm (pack of 3) is an easy to handle insulation board with a fibre-free rigid thermoset phenolic core used for timber and steel framing systems.
100mm K112 Framing Board is one of the thinnest commonly used insulation for timber and steel frame walls, it al..
The 57.5mm Kooltherm K118 Insulated Plasterboard by Kingspan is an insulated plasterboard, a premium performance, lower lambda internal wall insulation with an advanced fibre-free rigid thermoset phenolic insulation core.
K118 Kingspan Kooltherm is a highly durable, premium performance thermal in..
57.5mm Kingspan Kooltherm K118 (previously K18 and K17)
Insulation, dry-lining and vapour control in one board
Easy to handle and install - Ideal for new build, retrofit and refurbishment
Standards & Approvals: ISO 9001 - ISO 14001 - BBA Certificate 16/5299
Premium performance insulated plasterboard thermal conductivity of 0.019 W/mK
1200x1200mm X-Ray Resistant Code 7 Board is a lead lining sheet consisting of a gypsum plasterboard covered with a thin layer of lead used to provide complete radiation (x-rays) protection and safety in any environment.
X-ray Resistant Board Code 7 consists of 12.5mm plasterboard bonded to a 3.15..
Code 7 Lead Lined Plasterboard Radiation Protection
High-density gypsum board covered with a thin layer of lead
Used to provide complete X-rays protection and safety
1200mm x 1200mm - 1.44m2 (4 by 4) lead lining sheet
Dental Surgeries, Veterinary Practices and Hospitals
Lead Lined Plywood Code 7 (X-Ray Protection Panel) is an x-ray shielding, a strong plywood sheet covered with a thin layer of lead used to provide complete radiation (x-ray) protection and safety to walls, ceilings and floors in the healthcare industry.
Code 7 X-Ray Resistant Plywood Panel consis..
Code 7 Lead Lined Plywood X-ray Radiation Protection
Strong plywood sheet covered with a thin layer of lead
Used to provide complete X-rays protection and safety
Standard 2400mm x 1200mm (4′ x 8′) durable lead lining sheets
Dental Surgery, Veterinary Practice, Hospital, X-ray and Diagnostic rooms
Novia VC200 VCL DIY KIT is a complete full set of materials and fittings required for VC200 Reflective Air Leakage Vapour Control Layer installation.
DIY KIT contains: Novia VC200 Reflective Air Leakage Vapour Control Layer, 310mm Sealant Cartridge, Aluminium foil tape and 2 rolls of Novia Double..
Silicone Adhesive and Sealant (Anthracite) CT1 – 290ml cartridge is a ready-to-use silicone based sealant and adhesive that can be used to seal: solid wall insulation, render-only systems, baths, showers, roofs, doors, windows, and gutters.
Anthracite colour silicone sealant and adhesive is an ea..
100mm Basf Styrodur® 3000CS XPS Rigid Foam Board is a robust extruded polystyrene foam insulation board with ship-lap edges and smooth surface used as thermal insulation for flat and inverted roofs, floors, residential and commercial applications.
Styrodur® XPS 100mm comes in 1265mm long by 615mm..
100mm Black Foil Faced RS60 Knauf A1 Slab is a specially designed used as a fire, thermal and acoustic concrete soffit insulation with an excellent fire performance.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that ref..
100mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
100mm Black Foil Faced 2 Sided Knauf RS60 is a fire, thermal and acoustic insulation slab specially designed for concrete soffits, an A1 class non-combustible rock mineral wool.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy specially ..
100mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
100mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 100mm aluminium ..
100mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil insulation slab provid..
100mm Foil Faced on Both Sides Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil faced two sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 100mm x 600mm x 1200mm alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible product
Provides excellent fire, thermal and acoustic performance.
100mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 100mm aluminium foil in..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
100mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
100mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) rigid, non-combustible rock mineral wool insulation slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-c..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 - Excellent thermal and acoustic properties
100mm Xtratherm XT/CWP Cavity Wall Plus is an easy to install tongue and groove jointing polyisocyanurate (PIR) rigid insulation board with a low emissivity foil facings, used for traditional masonry partial fill cavity walls.
XT/CWP Cavity Wall Plus (T&G) is the best solution when building tradi..
100mm Xtratherm XT/CWP Cavity Wall Plus Insulation Board
Lower Lambda value (thermal conductivity) of 0.021 W/mK
Enhanced performance PIR (polyisocyanurate) rigid insulation
Easy to install tongue and groove (T&G) jointing system
Used as a traditional masonry partial fill cavity wall insulation
100mm Xtratherm XPS 300 is a strong high performance rigid extruded polystyrene insulation board providing a durable thermal solution to technically demanding applications where high compressive loading of 300kPa is a requirement.
XPS Rigid Foam Insulation Boards are suitable for many demanding a..
100mm Extruded Polystyrene Xtratherm XPS 300 kPa
For use in commercial, industrial and cold storage areas
Closed-cell structure, which prevents moisture-absorption
Very low lambda values and compressive loading capabilities
Xtratherm XPS Sheets are 1250mm long by 600mm wide boards
100mm Xtratherm Xtroliner XO/CW is an improved performance PIR (polyisocyanurate) tongue and groove insulation board with robust foil facings designed for partial fill cavity wall insulation with an approved thermal conductivity (lambda value) as low as 0.021W/mK.
This lower lambda improves U-Val..
110mm Unilin SR/FB Framing Board, an insulation used in ventilated cladding, timber and steel framed systems up to 11m in height, SR/FB can be used between studs or as an insulated sheathing.
Safe-R SR/FB is manufactured to EN 13166 by Unilin Insulation with certified lambda (thermal conductivity..
120mm Kingspan Kooltherm K112 Framing Board (pack of 2 sheets) is an ideal solution for new build, refurbishment and Modern Methods of Construction (MMC).
Kooltherm K112 120mm is a premium performance insulation board with a thermal conductivity of 0.019 W/mk, it allows target U-values to be reac..
120mm Rainscreen Cladding Insulation Xtratherm Safe-R SR/RS is a high-class rigid phenolic insulation board with a low emissivity foil facings designed for ventilated rainscreen cladding applications in new build and refurbishment projects.
Xtratherm SR/RS 120mm x 2400mm x 1200mm insulation board..
Lower Lambda values for improved U-Values
Superior Lambda Value as low as 0.020W/mK
BBA Certified - Certification Number 10/4803
Tested and Approved under BS 8414 and BR135
Euroclass B Fire Classification - Rainscreen Applications
120mm Framing Board Xtratherm Safe-R SR/FB is a top-class rigid foam phenolic insulation board with a low emissivity foil facings designed for use with steel and timber frame applications up to 18m in height.
A high-performance BBA certified phenolic 2400mm x 1200mm square edge panel with an appr..
Suitable for use in Steel and Timber Frame Systems
Superior Lambda Value as low as 0.020W/mK
Provides excellent U-Values and improved thermal bridging detailing
Can be used between studs or as an insulated sheathing board
120mm Xtroliner XO/FB Unilin, comprising a rigid Polyisocyanurate (PIR) core with low emissivity foil facings to achieve most efficient U-values in steel or timber frame construction.
Buildings constructed using a steel framed system are insulated on the outer side of the construction creating a ..
120mm Unilin XO/FB Framing Board (Steel and Timber Frame Applications)
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
Used between studs or as an insulated sheathing in a wide range of constructions
Suitable for new build and refurbishment projects in buildings up to 11m in height
120mm Xtratherm Xtroliner PIR Framing Board XO/FB is a premium polyisocyanurate insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB framing board can be ..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
140mm Knauf Rocksilk Flexible Insulation Slab is a functional thermal and acoustic multi-purpose rock mineral wool insulation slab which can be used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Knauf Fle..
165mm Celotex XR4000 PIR Insulation Board (XR4165) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for floor, wall, roof and ceiling cut-to-fit applications.
Celotex Insulation Board is an excellent ..
20mm PROMATECT-H Structural Calcium Silicate Board is a rigid non-combustible fire protection matrix engineered fire-board reinforced with selected fibres and fillers that does not contain formaldehyde and asbestos.
Fire Board Promatect-H 20mm can be used as a fire protection of steel and concret..
20mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
20mm Versapanel Cement Bonded Particle Board Class 0 is a robust cement bonded particle building board offering exceptional strength, mechanical and acoustic performance compared with other exterior gypsum sheathing boards.
Euroform Versapanel A2 20mm is a special SFS sheathing board that can be..
20mm Cement Bonded Particle Board CBPB
Versapanel A2, Class 0 Sheathing Building Board
Can be used in external and internal applications
Versatile Versapanel for residential and public applications
Exceptional strength, mechanical and acoustic performance
25mm Supalux by Promat is a strong building board offering 240 minutes fire protection, an ultimate A1 class non-combustible to EN 13501-1 calcium silicate fire board reinforced with selected fibres and fillers.
Supalux provides up to 240 minutes fire rating and improved moisture resistance that..
25mm Supalux Promat Non-combustible A1 Class Fire Protection board
Promat Supalux provides 240 minutes Fire Rating and Moisture Resistance
Calcium silicate fire board reinforced with selected fibres and fillers
Formulated without inorganic fibres and does not contain formaldehyde
Moisture and Impact resistant fire board Class 0 to Buildings Regulations
30mm Promat PROMATECT-250 is a solid fire protective board designed for structural steelwork and mezzanine floors, an A1 class non-combustible low density calcium-silicate board made with unique Promat PROMAXON® technology.
Promat PROMATECT 250 is a 30mm thick, 2500mm long by 1200mm wide calcium ..
30mm Promat PROMATECT 250 Fire Protection Board
A1 non-combustible low density calcium-silicate insulation board
PROMATECT®-250 is made with special PROMAXON® technology
Used for protection of steel structures and mezzanine floors
Provides up to 150 minutes fire protection to structural steelwork
37.5mm (25mm) Thermal Insulated Plasterboard Unilin XT/TL is made of 25mm PIR insulation bonded to 12.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable for ..
25mm PIR rigid foam insulation core bonded to 12.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
37.5mm Unilin XT/TL Board incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
37.5mm Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 25mm Unilin PIR insulation core bonded to 12.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour..
37.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot & Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot and dab direct b..
37.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix is made up of PIR insulation foam core bonded to 12.5mm plasterboard to provide high levels of thermal insulation for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly vers..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
40mm Unilin XT/PR Thin-R Board is a foil faced Polyisocyanurate (PIR) rigid foam insulation board used as a pitched roof insulation to achieve Future Home and Passive House Standards.
XT/PR PIR Board is a high performance foil faced insulation foam board with a certified thermal conductivity of 0..
40mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
40mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
40mm Unilin XT/TF Thin-R PIR Wall Insulation Sheet is a rigid foam insulation board suitable for use with timber frame and steel frame wall constructions in new build and refurbishment projects.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal..
40mm Unilin XT/UF Thin-R Floor Board is a foil faced Polyisocyanurate (PIR) rigid foam insulation board used as a underfloor insulation to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0..
40mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
40mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
40mm Xtratherm Thin-R is a rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for all types of small and large projects.
Thin-R Rigid Insulation Board (2400mm x 1200mm x 40mm) is a multi-application product designed for roofs, walls, floors, timber and steel framed sys..
46mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one so..
46mm Unilin FR/TP Flat Roof Insulation Decking is a pre-insulated roofing board made of 40mm PIR foam insulation core bonded to 6mm plywood used for new and refurbishment flat roof applications.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight foil f..
46mm Unilin FR/TP Warm Roof PIR Ply Insulation Board Decking
Used for new build and refurbishment flat roof applications
Creates a continuous Vapour Control Layer (Vapour Barrier)
PIR foam insulation core and 6mm plywood insulated decking
Unilin FR/TP Thermal ply flat roof insulation over joists board
49mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
50.8mm Promat MONOLUX 500 Fire Protection Board (MST 500) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 500 Board is a high performance tough and durable, resist..
Easy to Decorate with Paints, Wallpapers or Tiles
Monolux 500 up to 240 minutes Fire Resistance
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals
Ducts and Services Protection, Fire Door, Single Skin Partitions
50mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 24..
PROMATECT-MST PROMAT Fire Resistant Board is a 50mm x 1200mm x 2500mm non-combustible class A1 rigid machinable insulation board used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST is an effective and stable fire insulat..
50mm Promat PROMATECT®-MST A1 Fire Resistant Board
Stable fire insulation solution for demanding applications
High strength even when exposed to high temperature of 1000ºC
Fire insulation board with up to 240min fire resistance (protection)
Insulation in ovens and dryers, Heat shield, Structural thermal break
Promat Fire Protection Board VERMICULUX-S is a 50mm x 1200mm x 2500mm, A1 class non-combustible medium dense calcium silicate fire insulation board which provides 30 minutes to 240 minutes fire protection to structural steel applications.
VERMICULUX-S is used to protect one, two, three or four si..
52.5mm Celotex PL4000 PIR Thermal Insulation Board (PL4040) is an easy to install high-performance insulated plasterboard consist of polyisocyanurate rigid insulation foam core bonded to 12.5mm plasterboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists..
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
52.5mm (53mm) Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 40mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal..
52.5mm (53mm) XT/TL-FR is a fire resistant insulated plasterboard made of 40mm PIR insulation bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protection in a single ..
52.5mm (40mm) XT/TL-FR Fire Resistant Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
52.5mm Xtratherm XT/TL-MR Moisture Resistant Insulated Plasterboard is designed for internal building areas of high humidity conditions, ideal for receiving a plaster finish or for direct decoration.
XT/TL-MR Thermal Liner Thin-R is designed to improve moisture resistance and thermal performance ..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
60mm Kingspan ThermaFloor TF70 Floor Insulation Board is a rigid thermoset foam insulation board with certified thermal conductivity of 0.022 W/m.K that can be used to insulate solid concrete.
Thermafloor TF70 is a high performance flooring insulation suitable for use below the screed, in block a..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS
60mm Kingspan TW55 Stud Wall Insulation Board is a rigid thermoset foam insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Thermawall TW55 Kingspan PIR 2400mm x 1200mm Board is a high performance insulation suitable for use w..
Promat PROMATECT L500 Fire Protection Board 60mm is a versatile non-combustible low density calcium silicate fire insulation board, used for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
60mm Promat L500 PROMATECT i..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
60mm Unilin Thin-R XT/CW (T&G) is a rigid PIR partial fill cavity insulation board with low emissivity foil facings, ensuring cavity wall insulation continuity and minimisation of thermal bridging.
Unilin XT/CW (T&G) tongue and groove jointing offers a practical onsite solution that results in a ..
60mm Unilin Thin-R XT/CW Partial Fill Cavity Wall Insulation Board
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CW improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
Kingspan Kooltherm K118 62.5mm Single Board is made using 12.5mm premium gypsum plasterboard bonded to 50mm rigid foam phenolic insulation core with foil facing and paper backing.
Kooltherm K118 range is a rigid phenolic thermoset insulation core with a certified thermal conductivity (lambda valu..
62.5mm Kingspan Kooltherm K118 Insulated Plasterboard (K18 and K17)
High-quality insulation material made of a rigid phenolic core and plasterboard
Premium performance, lower lambda for internal wall insulation projects
Unbeatable insulated plasterboard with no equivalent to K118 thermal performance
Premium performance insulation board - thermal conductivity of 0.019 W/mK
TW50 Thermawall Kingspan PIR Cavity Wall Insulation Board is a 65mm partial fill cavity wall insulation board designed for partial fill masonry cavity walls.
Thermawall TW50 is a stable and rot proof insulation board used in newbuild or extension projects and will remain effective for the life sp..
65mm Xtratherm XT/CW Partial Fill Cavity Wall is a high quality square edge PIR insulation board with certified thermal conductivity of 0.022 W/mK designed for use in traditional masonry partial fill cavity walls.
Xtratherm Cavity Wall is a highly-durable, rot proof insulation board and will rema..
70mm Recticel Eurothane General Purpose Insulation Board is an easy to cut and fit PIR rigid insulation board faced with a gas diffusion tight multilayer foil on both sides that is suitable for pitched roof, timber and steel framed walls, ceilings and floor applications.
Recticel Eurothane GP 240..
75mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 75mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.