Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Acoustic resin bonded slabs are essential to any noise reduction project and can be used to insulate walls, floors and ceilings. Acoustic slabs allow any moisture to dry omnidirectionally - in other words both ways. These slabs are non-combustible, with a class ‘O’ fire rating and can be friction fit. Acoustic insulation slabs start at a minimum density of 45kg/m³ up to 140kg/m³.Acoustic slabs are manufactured to a higher density than other forms of insulation, unlike thermal insulation which is lower in density and supplied in rolls. When you normally use roll for floors, slabs are normally for walls.
ACOUSTIC SLABS RANGE ǀ DENSITY
Acoustic slab range is available in a variety of thicknesses and densities. All slabs are 1200mm x 600mm. Sound shield slab range comes with a choice of density and this is how compacted the slab is (not the weight). The range in density is kg/m³ from 45, 60, 80 100 & 140. It’s the density that marks out this type of soundproof insulation from other slabs of insulation. The easiest way to understand which one to choose would be to assume the higher the density, the better the overall level of soundproofing. It is recommended to use 60kg/m³ as this offers the best sound insulation for the money spent.
Common thickness: 25mm, 30mm, 40mm, 50mm, 60mm, 75mm, 100mm and 150mm.
TYPES OF ACOUSTIC SLABS
Generally speaking, acoustic slabs can be divided into 2 main categories named as a mineral wool slab and stone wool slab. Different ingredients are used in the production of these acoustic slabs. While stone wool slab is made of basalt - volcanic rock (stone), mineral wool slab is made of glass cullet together with quartz sand. Both types of slabs are good for sound insulation. Moreover, both are carefully fabricated to add merest to the all-inclusive mass of the building structure. Both types of slabs come from well-known brands such as KNAUF® and ROCKWOOL®.
ROCKWOOL®
Slabs from ROCKWOOL are an excellent choice thanks to their ease of installation. They can simply be friction-fitted into joists and studs in all metal and timber frame constructions. ROCKWOOL acoustic slabs are divided into subcategories:
The Rockwool RW Slab range is used for thermal, acoustic and fire insulation in general building applications. The structure of the fibres in Rockwool RW slabs make them ideal for use as a sound absorber, with characteristically high coefficients over a wide frequency range. Rockwool stone wool products work in two distinct ways to reduce noise, either by impeding the transmission of sound through an element of the structure or by absorption of sound at the surface. These dense slabs are available in varying thicknesses that range from 25mm to 140mm. ROCKWOOL RW Slabs conform to: BS EN 13162:2012 ROCKWOOL RWA45 and RW3 slabs can be used for a wide range of applications, which include acoustic and fire insulation for partitions and ceilings, as well as thermal insulation for floors, walls, and roofs. Rockwool RWA45 is named after its density properties in that it has a density of 45Kg per cubic meter. Accordingly Rockwool RW3 has a density of 60Kg per cubic meter and so on.
ROCKWOOL RW6 slab is a robust insulation solution for a range of general building projects as well as specialist specifications such as commercial, leisure, industrial buildings and more. The insulation provides excellent acoustic, thermal and fire performance.
ROCKWOOL RW5 are versatile building slabs for a wide range of general building applications, ROCKWOOL RW5 rigid slabs are high quality resin bonded slabs that can be used for thermal, acoustic and fire resistant insulation in general building applications.
ROCKWOOL RW3 is a robust insulation solution for a range of general building projects as well as specialist specifications such as commercial, leisure, industrial buildings and more.
Acoustic ROCKFLOOR® delivers impact sound protection for intermediate and separating floors.
ROCKWOOL FLEXI® is a multi-use, thermal, acoustic and fire insulation product with a unique flexible edge along one side. The patented flexible edge ensures a perfect fit is maintained between the product and its supporting framework for easy installation and optimum effectiveness. FLEXI® is suitable for use between frames in walls, partitions, floors and roofs, without the need for cutting or waste. Made from renewable volcanic rock, it is extremely fire resistant and significantly reduces the carbon footprint of a building.
KNAUF®
Rocksilk® Acoustic Floor Slab is a Rock Mineral Wool slab, designed to meet the acoustic requirements for use in floating floors. They are manufactured using Knauf Insulation’s unique bio-based binder, ECOSE® Technology.
Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material. Knauf Rocksilk RS45 insulation slab can be used in a variety of applications including internal partitions, timber and metal studs and in between timber rafters and floor joists.
Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications. Knauf RS60 is a high-efficiency unfaced insulation with a certified thermal conductivity (λ - lambda value) of 0.034W/mK.
Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) non-combustible rock mineral wool. Knauf RS100 1200mm x 600mm insulation slab provides outstanding fire, thermal and acoustic performance for both new build and refurbishment projects.
Foil Faced Rocksilk RS45/60/100 Knauf Insulation Slab is non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
ACOUSTIC SLABS APPLICATIONS
Acoustic Insulation Products,
Ceiling Soundproofing,
Floor Soundproofing,
Timber/metal studs,
Ceiling joists
Video credit:https://www.youtube.com/watch?v=u0BYRb6MHBM&t=78s
56mm High Impact Soffit Liner Board for Concrete Soffits (RW5 and Masterboard) is used to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RW5 insulation slab faced with 6mm Promat Masterbo..
56mm Soffit Liner Insulation Board A1 Class Non-combustible
50mm Rockwool RW5 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
56mm Soffit Liner Board A1 (50mm RWA45 and 6mm Masterboard) is a non-combustible class A1 soffit liner insulation panel that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using high performing, non-combustible Rockwo..
56mm Soffit Liner Insulation Board A1 Class Non-combustible
50mm Rockwool RWA45 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
60mm Knauf Rocksilk Flexible Multi-purpose Insulation Slab is a rock mineral wool insulation slab which can be used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Knauf Flexible Insulation Slab is non-comb..
62mm Soffit Liner Board (50mm RWA45 & 12mm Masterboard) is a superior performance A1 class soffit liner insulated panel that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RWA45 insulati..
62mm Soffit Liner Insulation Board A1 Class Non-combustible
50mm Rockwool RWA45 bonded to 12mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
75mm Rockwool RW4 Double Sided Foil Faced Insulation Slab is a foil backed on both sides insulation slab with the highest class A1 fire rating used to prevent the spread of flames and fire in buildings.
Rockwool RW4 Foil Faced 2 Sides Slab 75mm x 600mm x 1200mm fire performance integrity is 240 m..
Foil Faced x2 Sides Rockwool RW4 (80kg/m3) A1 Class 1200x600x75mm
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4 (FFx2)
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations (FFx2)
Fire performance integrity is 240 minutes, and 60 minutes for the insulation core
75mm Rockwool RW4 (80kg) is an excellent acoustic, thermal and fire resin bonded rigid insulation slab with the highest class A1 non-combustible fire rating used for a wide range of building applications.
Rockwool Stone Wool Insulation Slab if correctly installed exceeds the minimum requirements ..
75mm x 600mm x 1200mm Rockwool RW4 (80kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
75mm Rockwool RW4 Foil Faced is a foil backed insulation slab with the highest class A1 fire rating used to prevent the spread of flames, heat, smoke and fire through concealed spaces in buildings.
Rockwool RW4 Foil Backed Slab 75mm x 600mm x 1200mm fire performance integrity is 240 minutes, and ..
Foil Faced x1 Side Rockwool RW4 (80kg/m3) A1 Class 1200x600x75mm
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations
Fire performance integrity is 240 minutes, and 60 minutes for the insulation core
75mm Stone Wool Insulation Slab Xtratherm SW/RS is a robust high density non-combustible A1 stonewool insulation slab with an improved acoustic performance used for ventilated rainscreen cladding systems in standard and high rise buildings.
The SW/RS range of stone wool insulation provides surety..
Rockwool RWA45 Foil Faced Fire Slab 30mm is an ultimate foil faced fire and acoustic stone wool slab used to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Foil Faced Slab is a simple butt joint product that can be used where fire resistant walls ne..
Rockwool RWA45 Foil Faced Fire Slab 30mm
Aluminium foil faced fire and acoustic stone wool slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
60mm Rockwool Ablative Coated Batt FIREPRO is a strong and durable pre-coated on both sides stone wool fire insulation batt with an outstanding fire performance that can be installed across a variety of services and substrates.
Rockwool Ablative Coated Batt fire resistant insulation offering up t..
Foil Faced 2 Sides Fire Slab Rockwool RWA45 30mm is a durable aluminium foil faced on both sides stone wool core fire slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RWA45 Foil Faced Two Sides Fire Barrier Slab 30mm x 600mm..
Foil Faced 2 Sides Fire Slab Rockwool RWA45 30mm
Aluminium Foil Faced Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
Knauf Rocksilk RS60 White Tissue Faced Two Sides Slab is a 40mm thick soffit insulation slab, an A1 class rock mineral wool core faced with white tissue on both sides, used for roofs and concrete car park soffits.
Rocksilk RS60 is a medium density (60kg/m3) insulation slab with a certified therma..
100mm Foil Faced 2 Sides Insulation Slab Rockwool RW4 is an insulation slab with the highest class A1 fire rating, a rigid non-combustible stone wool based insulation used where fire performance is crucial.
Rockwool RW4 Foil Faced Two Sides Slab 100mm x 600mm x 1200mm fire performance integrity i..
Foil Faced x2 Sides Rockwool RW4 (80kg/m3) A1 Class 1200x600x100mm
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4 (FFx2)
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations (FFx2)
Fire performance integrity is 240 minutes, and 60 minutes for the insulation core
100mm Foil Backed Slab Rockwool RW4 80kg/m3 is an insulation slab with the highest class A1 fire rating, a rigid non-combustible stone wool based insulation used where fire performance is crucial.
Rockwool RW4 Foil Faced Slab 100mm x 600mm x 1200mm fire performance integrity is 240 minutes, and 6..
Foil Faced x1 Side Rockwool RW4 (80kg/m3) A1 Class 1200x600x100mm
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations
Fire performance integrity is 240 minutes, and 60 minutes for the insulation core
100mm Rockwool RW4 (80kg) is a stone wool fire resistant thermal and acoustic insulation slab with the highest possible class A1 non-combustible fire rating used for a wide range of building applications.
Rockwool Stone Wool Insulation Slab if correctly installed exceeds the minimum requirements ..
100mm x 600mm x 1200mm Rockwool RW4 (80kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
100mm Xtratherm SW/RS Stone Wool Insulation Slab is a high density non-combustible A1 stonewool insulation slab with an improved acoustic performance used for ventilated rainscreen cladding systems in standard and high rise buildings.
The SW/RS range of stone wool insulation provides surety when ..
40mm Black Tissue Faced 1 Side Knauf Rocksilk RS45 Slab is a soffit insulation slab, an A1 rock mineral wool core faced with black tissue on one side, used for roofs, concrete car park soffits and similar applications.
Rocksilk RS45 is a high efficiency insulation slab with a certified lambda val..
40mm Black Tissue Faced Knauf Rocksilk RS45 Insulation Slab A1
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
40mm Black Tissue Faced Two Sides Rocksilk Knauf RS45 Slab is a soffit insulation slab, an A1 rock mineral wool core faced with black tissue on both sides, used for roofs, concrete car park soffits and similar applications.
The black tissue facings on two sides helps to avoid the slab edges from ..
40mm Black Tissue Faced 2 Sides Knauf RS45 Insulation Slab
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
40mm Double Sided Aluminum Foil Insulation Slab RW3 (7.20m²/pack) is a durable foil faced on both sides stone wool resin bonded slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Two Sides Fire Barrier Slab 1200..
Double Sided Foil Facing Fire Slab Rockwool RW3 - 40mm
Aluminium Foil Faced on Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
40mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 40mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
40mm Foil Faced Fire Slab Rockwool RW3 (7.20m² / pack) is a class 'O' foil faced fire and acoustic stone wool core insulation slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Slabs (60kg per m3) are simple but..
Rockwool RW3 Foil Faced Fire Slab 40mm (60kg/m3)
Aluminium foil faced fire and acoustic stone wool slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
40mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 40mm aluminium fo..
40mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 40mm foil backed slab pr..
40mm Foil Faced on Both Sides Rocksilk RS100 Knauf Fire Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil faced two sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 40mm a..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame Non-combustible
Provides excellent fire, thermal and acoustic performance.
40mm Knauf RS45 Black Foil Backed Two Sides Slab is an insulation solution specially designed for concrete soffits, an A1 class non-combustible rock mineral wool slab.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new build an..
40mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
40mm Knauf Rocksilk RS45 Black Foil Backed Slab is an insulation solution specially designed for concrete soffits, an A1 class non-combustible rock mineral wool insulation slab.
Knauf RS45 1200mm x 600mm x 40mm black foil backed slab provides outstanding fire, thermal and acoustic performance for..
40mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
40mm Black Tissue Faced One Side Rocksilk RS100 (100kg) Slab is a soffit insulation slab, an A1 class rock mineral wool core faced with black tissue on one side, used for roofs, concrete car park soffits and similar applications.
Knauf Rocksilk RS100 is a high density (100kg/m3) insulation slab w..
40mm Knauf RS100 Black Tissue Faced 1 Side Insulation Slab A1
High density 100kg/m3 Thermal conductivity (lambda) 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
40mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) non-combustible rock mineral wool unfaced rigid slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
40mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material designed for use in multiple applications..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
40mm Knauf Rocksilk RS45 White Tissue Faced One Side Slab is a soffit insulation slab, an A1 class rock mineral wool core faced with white tissue on one side, used for roofs, concrete car park soffits and similar applications.
The white tissue facing on one side helps to avoid the slab edges from..
White Tissue Faced Knauf RS45 Insulation Slab 40x600x1200mm
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
Knauf Rocksilk RS45 White Tissue Faced Two Sides Slab is a 40mm thick soffit insulation slab, an A1 class rock mineral wool core faced with white tissue on both sides, used for roofs and concrete car park soffits.
40mm RS45 is a standard density (45kg/m3) insulation slab with a certified thermal ..
40mm White Tissue Faced 2 Sides Knauf RS45 Insulation Slab
From 30 up to 240 minutes fire protection (1200x600x40mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
40mm Black Tissue Faced Both Sides RW3 is a highly durable A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits and similar applications.
Black Tissue Faced Both Sides Rockwool RW3 (Formerly ProRox® SL 930..
Black Tissue Faced 2 Sides 40mm Insulation Slab Rockwool RW3
Soffit Slab for providing fire resistance and thermal insulation
Used for structural elements such as concrete car park soffits
A1 class, non-combustible fire resistant stone wool insulation slab
Provides from 30 minutes up to 240 minutes fire protection
40mm Black Tissue Faced Rockwool RW3 is a highly durable A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits and similar applications.
Black Tissue Faced Rockwool RW3 (Formerly ProRox® SL 930) is a medium..
40mm Rockwool RW3 Black Tissue Faced Insulation Slab A1
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Provides from 30 minutes up to 240 minutes fire protection
Fire resistant resin bonded stone wool slab 1200mm x 600mm
Used for structural elements such as concrete car park soffits
40mm Black Tissue Faced Both Sides RWA45 is a highly durable A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits and similar applications.
Rockwool RWA45 Insulation Slab 40mm x 600mm x 1200mm with black t..
Black Tissue Faced 2 Sides 40mm Rockwool RWA45 Insulation Slab
Class A1, non-combustible fire resistant resin bonded stone wool slab
Density of 45kg/m3 and thermal conductivity (lambda) of 0.035W/mK
Black tissue on 2 sides can provide from 30min up to 240min fire protection
For structural elements such as concrete car park soffits and similar applications
40mm Black Tissue Faced Rockwool RWA45 is a highly durable A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits and similar applications.
Rockwool RWA45 Insulation Slab 40mm x 600mm x 1200mm faced with bla..
40mm Rockwool RWA45 Black Tissue Faced Insulation Slab
A1, non-combustible fire resistant resin bonded stone wool
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
40mm Knauf RS100 White Tissue Faced Two Sides Insulation Slab is a robust A1 non-combustible slab, used as a fire, thermal and acoustic insulation for structural elements such as roofs and concrete car park soffits.
The white tissue facings on both sides helps to avoid the slab edges from showing..
40mm Knauf RS100 White Tissue Faced 2 Sides Insulation Slab
From 30 up to 240 minutes fire protection (40x600x1200mm)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
40mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust, medium-density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Insulation in cei..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
40mm Rockwool RWA45 Acoustic Insulation Slab (Prorox SL920) is a non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using RWA45 Rockwool Insulation in ceilings, walls and flo..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
Rockwool RW3 White Tissue Faced 1 Side Slab 40mm is a semi-rigid, A1 non-combustible fire resistant resin bonded insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
This special white tissue facing helps to avoid the slab edges from sho..
40mm Rockwool RW3 White Tissue Faced 1 Side Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
40mm RWA45 White Tissue Faced 2 Sides Slab is a semi-rigid, A1 non-combustible fire resistant resin bonded insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
White Tissue Faced Two Sides RWA45 (Formerly ProRox SL 920) is a standard den..
40mm Rockwool RWA45 White Tissue Faced Two Sides Slab x2
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
40mm RWA45 White Tissue Faced One Side Slab is a semi-rigid, A1 non-combustible fire resistant resin bonded insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Rockwool RWA45 Insulation Slab 40x600x1200mm faced with white tissue on 1 si..
40mm Rockwool RWA45 White Tissue Faced One Side Slab x1
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
40mm Rockwool RW3 White Tissue Faced 2 Sides Insulation Slab is an A1 non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
An unique white tissue facings on both sides helps to avoid..
40mm Rockwool RW3 White Tissue Faced 2 Sides Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
50mm Black Foil Faced RS60 Knauf Slab is an aluminium black foil faced to one side insulation slab with an excellent class A1 fire performance used for concrete soffits.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that..
50mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
50mm Black Foil Faced x2 Sides RS60 Knauf is a fire non-combustible insulation slab faced with a composite black foil on two sides providing an excellent class A1 fire performance.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy special..
50mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
50mm RW5 Foil Backed Rockwool Insulation Slab is a 100kg density per cubic meter foil faced fire and acoustic stone wool insulation slab used to prevent the spread of flames, heat, smoke and fire through concealed spaces in buildings.
Rockwool RW5 Foil Backed Slab is an A1 class, non-combustible ..
50mm Foil Faced 1 Side Insulation Slab Rockwool RW5
100kg density - Foil Faced on One Side Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
50mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil slab provides outstandi..
50mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 50mm aluminium foil insu..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
50mm RS140 Knauf Rocksilk is a non-combustible rock mineral wool insulation slab with the best possible Euroclass A1 reaction to fire classification used in multiple thermal and acoustic applications.
RS140 Rocksilk is manufactured with a density of 140kg/m3, designed for use in a variety of appl..
50mm x 600mm x 1200mm Knauf Rocksilk RS140 (140kg/m3)
Class A1 Non-combustible Rigid Rock Mineral Wool Insulation Slab
Fire, thermal and acoustic insulation slab used for building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceiling, timber & steel frame
50mm Knauf Rocksilk RS60 (60kg) Black Tissue Faced Two Sides Insulation Slab is a strong and durable class A1 non-combustible rock mineral wool insulation slab, used for structural elements such as roofs and concrete car park soffits.
Knauf RS60 Slab (50mm x 600mm x 1200mm) faced with black tissu..
50mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
50mm White Tissue Faced 1 Side Knauf RS60 Insulation Slab is a rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs and concrete car park soffits.
The white tissue facing on one side helps to avoid the slab edges from showing as shadows thr..
50mm White Tissue Faced 1 Side Knauf RS60 60kg Insulation Slab
From 30 up to 240 minutes fire protection (1200x600x50mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
Knauf RS60 Black Tissue Faced One Side Soffit Slab 50mm is an A1 class, non-combustible fire resistant rock mineral wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
50mm Knauf Rocksilk RS60 is a medium density (60kg/m3) insulati..
Black Tissue Faced Knauf Rocksilk RS60 Insulation Slab A1 (50mm)
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
50mm Rockwool RW5 Foil Faced Two Sides Insulation Slab is a resin bonded, rigid foil faced on both sides stone wool 100kg density insulation slab used to prevent the spread of flames and inhibit heat through concealed spaces in buildings.
Foil Faced Two Sides Fire Barrier Slab RW5 50mm x 600mm x ..
50mm Double Sided Foil Faced Fire Slab Rockwool RW5
100kg density - Foil Faced on Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
White Tissue Faced 2 Sides Knauf RS60 Insulation Slab 50mm is a rock mineral wool based, class A1 insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
50mm RS60 is a medium density (60kg/m3) insulation slab with a certified thermal condu..
50mm Black Tissue Faced Insulation Slab RW5 is a fire, thermal and acoustic insulation slab particularly suited for providing fire resistance and thermal insulation through concrete car park soffits and similar applications.
Rockwool RW5 Insulation Slab 50mm x 600mm x 1200mm with black tissue on ..
50x600x1200mm Rockwool RW5 Black Tissue Faced Slab A1
Formerly ProRox® SL960 Thermal conductivity of 0.034W/mK
Used for structural elements such as concrete car park soffits
A1 class, non-combustible fire resistant stone wool insulation slab
Provides from 30 minutes up to 240 minutes fire protection
50mm Rockwool RW5 Insulation Slab (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant acoustic insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using Rockwool RW5 Insulation in ..
RW5 is rated Euroclass A1 non-combustible
Excellent thermal, Acoustic (100kg density) and fire performance
50mm Terrawool TW50 Sound Insulation Slab is a standard density (50kg/m3) non-combustible thermal and acoustic stone wool insulation slab used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab is a high-performance recyclable and dur..
Rockwool RW5 White Tissue Faced 2 Sides 50mm Insulation Slab is a robust class A1 fire resistant resin bonded stone wool rigid insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
This special white tissue facings on both sides helps to ..
Rockwool RW5 White Tissue Faced 2 Sides Insulation Slab 50mm
Robust A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 100kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
White Tissue Faced One Side Slab Rockwool RW5 is a 50mm thick insulation slab, a non-combustible rigid stone wool board faced with white tissue used as a fire resistant and thermal insulation for roofs and concrete car park soffits.
The white tissue facing on one side helps to avoid the slab edge..
50mm White Tissue Faced 1 Side Rockwool RW5 Insulation Slab
High-density 100kg/m3 and an excellent sound absorbing qualities
Provides from 30 minutes up to 240 minutes fire protection
Certified thermal conductivity (lambda value) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
70mm Knauf Rocksilk Flexible Insulation Slab is a thermal and acoustic multi-purpose rock mineral wool insulation slab which can be used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Knauf Flexible is non..
75mm Rockwool RW6 Foil Faced x2 Sides Slab is an insulation suitable for a wide range of applications, an A1 class non-combustible insulation slab with an excellent fire, thermal and acoustic properties.
Foil Faced Two Sides (FFx2) Rockwool RW6 75x600x1200mm fire performance integrity is 240 minu..
75mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
75mm Rockwool RW6 is a versatile slab suitable for a wide range of building applications, an A1 non-combustible resin bonded insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Slab is manufactured in 140kg density per cubic meter (140kg/m3), specially designed for us..
75mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
75mm Rockwool RW6 Foil Faced 1 Side is an insulation slab suitable for a wide range of building applications, an A1 non-combustible insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Foil Faced x1 Side Slab 75x600x1200mm fire performance integrity is 240 minutes, and..
75x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
81mm Soffit Liner Insulated Panel (75mm RWA45 & 6mm Masterboard) is a high performance class A1 soffit liner insulation board that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using high performing, non-combustible ..
81mm Soffit Liner Insulation Board A1 Class Non-combustible
75mm Rockwool RWA45 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
81mm Soffit Linerboard Insulation Slab (75mm RW5 and 6mm Masterboard) is used to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RW5 insulation slab faced with 6mm Promat Masterboard (fire..
81mm Soffit Liner Insulation Board A1 Class Non-combustible
75mm Rockwool RW5 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
87mm Soffit Liner Panel A1 (75mm RWA45 & 12mm Masterboard) is an ultimate class A1 soffit liner insulation board that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RWA45 insulation slab..
87mm Soffit Liner Insulation Board A1 Class Non-combustible
75mm Rockwool RWA45 bonded to 12mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
50mm RW5 Black Tissue Faced Two Sides Soffit Slab is a non-combustible A1 insulation slab faced with black tissue on both sides, used for providing fire resistance and thermal insulation for structural elements and similar applications.
Black Tissue Faced Both Sides Rockwool RW5 50mm (Formerly Pr..
Foil Faced 2 Sides Fire Slab Rockwool RWA45 40mm is a high performance aluminium foil faced on both sides stone wool core fire slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RWA45 Foil Faced Two Sides Fire Barrier Slab 40m..
Foil Faced 2 Sides Fire Slab Rockwool RWA45 40mm
Aluminium Foil Faced Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
Rockwool RWA45 Foil Faced Fire Slab 40mm is a robust aluminium foil faced fire and acoustic stone wool core insulation slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Foil Faced Slab is a simple butt joint product that can be used w..
Rockwool RWA45 Foil Faced Fire Slab 40mm
Aluminium foil faced fire and acoustic stone wool slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
Kingspan K-Roc Rainscreen Façade Slab 80mm is an insulation slab for use behind rainscreen façades in all buildings regardless of building type, height, construction and location, a class A1 rock mineral fibre insulation slab.
80mm Rainscreen Façade Insulation Slab Kingspan K-Roc is a great heat ..
Knauf RS100 Black Tissue Faced 2 Sides Insulation Slab is a 40mm thick fire and acoustic rock mineral wool insulation slab, used for providing fire resistance and thermal insulation for roofs, concrete car park soffits and similar applications.
Rocksilk RS100 is an ultimate (100kg per cubic metre..
40mm Knauf RS100 Black Tissue Faced Two Sides Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Provides from 30 minutes up to 240 minutes fire protection
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Used for structural elements such as concrete car park soffits
Knauf Rocksilk RS100 White Tissue Faced 1 Side Insulation Slab is a 40mm thick, 100kg/m3 density class A1 soffit insulation slab, used as a fire, thermal and acoustic insulation board for structural elements.
Rocksilk RS100 is a high density (100kg/m3) insulation slab with a certified thermal con..
40mm Knauf RS100 White Tissue Faced 1 Side Insulation Slab - 100kg
From 30 up to 240 minutes fire protection (1200x600x40mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
100mm Rockwool RW6 (140kg) is suitable for a wide range of general building applications, a rigid class A1 resin bonded stone wool insulation slab with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Slab is manufactured in 140kg density per cubic meter (140kg/m3), specially desi..
100mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
100mm Foil Backed on Both Sides Rockwool RW6 is a foil faced on 2 sides insulation used where fire rating is crucial, an A1 rigid insulation slab with an excellent fire, thermal and acoustic properties.
Foil Faced Two Sides (FFx2) Rockwool RW6 100x600x1200mm fire performance integrity is 240 minu..
100mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
Foil Backed Rockwool RW6 is a 100mm thick foil faced on one side insulation slab used where fire rating is crucial, a rigid class A1 insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Foil Faced x1 Side Slab 100x600x1200mm fire performance integrity is 240 minutes, a..
100x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
106mm Soffit Liner Insulated Panel (100mm RWA45 & 6mm Masterboard) is a class A1 non-combustible soffit liner insulation board that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using high performing, non-combustible..
106mm Soffit Liner Insulation Board A1 Class Non-combustible
100mm Rockwool RWA45 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
106mm Soffit Linerboard Insulation A1 (100kg RW5 Slab) is a class A1 non-combustible soffit board used to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RW5 insulation slab faced with 6mm..
106mm Soffit Liner Insulation Board A1 Class Non-combustible
100mm Rockwool RW5 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
112mm Soffit Liner Insulation Board (100mm RWA45 & 12mm Masterboard) is an advanced class A1 soffit liner insulation that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RWA45 insulation ..
112mm Soffit Liner Insulation Board A1 Class Non-combustible
100mm Rockwool RWA45 bonded to 12mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
125mm Ventilated Rainscreen Cladding Slab SW/RS is an A1 non-combustible high-density stonewool insulation slab with an improved acoustic performance used for ventilated rainscreen cladding systems in standard and high rise buildings.
The SW/RS range of stone wool insulation provides surety when ..
50mm Black Foil Faced Knauf RS45 is a fire-resistant thermal and acoustic insulation slab specially designed for concrete soffits, an A1 class non-combustible rock mineral wool.
Knauf RS45 1200mm x 600mm x 50mm black foil backed slab provides outstanding fire, thermal and acoustic performance for..
50mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
50mm Double Sided Aluminum Foil Insulation Slab RW3 (5.76m²/pack) is a non-combustible foil faced on both sides stone wool resin bonded slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Two Sides Fire Barrier S..
Double Sided Foil Facing Fire Slab Rockwool RW3 - 50mm
Aluminium Foil Faced on Both Sides Fire Barrier Slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Excellent fire performance classified as Euroclass A1 | Class 'O'
50mm Black Foil Faced 2 Sided Knauf RS45 is a fire, thermal and acoustic insulation slab specially designed for concrete soffits, an A1 class non-combustible rock mineral wool.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new..
50mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
50mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 50mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
50mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 50mm aluminium fo..
50mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 50mm foil backed slab pr..
50mm Foil Faced Fire Slab Rockwool RW3 (5.76m² / pack) is a high-quality foil backed stone wool fire insulation slab developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings.
Rockwool RW3 Foil Faced Slabs (60kg per m3) are simple butt joint produc..
Rockwool RW3 Foil Faced Fire Slab 50mm (60kg/m3)
Aluminium foil faced fire and acoustic stone wool slab
Developed to prevent the spread of flames and inhibit heat
Conform with the Building Regulations Approved Document B
Great fire performance classified as Euroclass A1 | Class 'O'
50mm Foil Faced on Both Sides Rocksilk RS100 Knauf Fire Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil-faced two-sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200 x 600 x 50mm alumi..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations Euroclass A1
Density 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible material
Provides excellent fire, thermal and acoustic performance.
50mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) non-combustible rock mineral wool unfaced rigid slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
50mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material designed for use in multiple applications..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
50mm Rockwool RW3 Black Tissue Faced 2 Sides Insulation Slab is a strong, rigid A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits.
Black Tissue Faced Both Sides Rockwool RW3 (ProRox® SL930) 50mm is a me..
Black Tissue Faced 2 Sides 50mm Insulation Slab Rockwool RW3
Soffit Slab for providing fire resistance and thermal insulation
Used for structural elements such as concrete car park soffits
A1 class, non-combustible fire resistant stone wool insulation slab
Provides from 30 minutes up to 240 minutes fire protection
50mm Black Tissue Faced Soffit Insulation Slab Rockwool RW3 is an A1 class, 60kg density non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits.
Black Tissue Faced Rockwool RW3 (Formerly ProRox® SL 930) is a medium-de..
50mm Rockwool RW3 Black Tissue Faced Insulation Slab A1
Density 60kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Provides from 30 minutes up to 240 minutes fire protection
Fire resistant resin bonded stone wool slab 1200mm x 600mm
Used for structural elements such as concrete car park soffits
50mm Rockwool RWA45 Black Tissue Faced Slab is a strong semi-rigid, 45kg density non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits.
Rockwool RWA45 Insulation Slab 50mm x 600mm x 1200mm faced with black tissue on ..
50mm Rockwool RWA45 Black Tissue Faced Insulation Slab
A1, non-combustible fire resistant resin bonded stone wool
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
50mm Rockwool RWA45 Black Tissue Faced 2 Sides Slab is a strong semi-rigid A1 class, non-combustible fire resistant resin bonded stone wool insulation slab, used for structural elements such as concrete car park soffits.
Rockwool RWA45 Insulation Slab 50mm x 600mm x 1200mm with black tissue on 2 ..
Black Tissue Faced 2 Sides 50mm Rockwool RWA45 Insulation Slab
Class A1, non-combustible fire resistant resin bonded stone wool slab
Density of 45kg/m3 and thermal conductivity (lambda) of 0.035W/mK
Black tissue on 2 sides can provide from 30min up to 240min fire protection
For structural elements such as concrete car park soffits and similar applications
50mm Knauf RS100 Black Tissue Faced Insulation Slab is an acoustic rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Knauf Rocksilk RS100 is a high density (100kg/m3) insulation slab w..
50mm Knauf RS100 Black Tissue Faced 1 Side Insulation Slab A1
High density 100kg/m3 Thermal conductivity (lambda) 0.034W/mK
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Used for structural elements such as concrete car park soffits
Black Tissue Faced on Both Sides Slab Knauf RS100 50mm is a rigid insulation slab, an A1 non-combustible rock mineral wool core faced with black tissue on both sides, used for roofs, concrete car park soffits and similar applications.
Rocksilk RS100 is an ultimate (100kg per cubic metre density) ..
50mm Knauf RS100 Black Tissue Faced Two Sides Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Provides from 30 minutes up to 240 minutes fire protection
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Used for structural elements such as concrete car park soffits
50mm White Tissue Faced One Side Knauf RS100 Insulation Slab is a rock mineral wool based, class A1 non-combustible soffit insulation slab, used for structural elements such as roofs and concrete car park soffits.
Rocksilk RS100 is a high density (100kg/m3) insulation slab with a certified therma..
50mm Knauf RS100 White Tissue Faced 1 Side Insulation Slab - 100kg
From 30 up to 240 minutes fire protection (1200x600x50mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
50mm White Tissue Faced 2 Sides Knauf RS100 Insulation Slab is a rigid A1 class, non-combustible insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The white tissue facings on both sides helps to avoid the slab edges from showing as sh..
50mm Knauf RS100 White Tissue Faced 2 Sides Insulation Slab
From 30 up to 240 minutes fire protection (50x600x1200mm)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 100kg/m3 Thermal conductivity (lambda) of 0.034W/mK
Used for structural elements such as concrete car park soffits
50mm RS45 Black Tissue Faced One Side Soffit Slab is an A1 class, non-combustible fire resistant rock mineral wool insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
Rocksilk RS45 is a high efficiency insulation slab with a certified l..
50mm Black Tissue Faced Knauf Rocksilk RS45 Insulation Slab A1
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
50mm RS45 Black Tissue Faced 2 Sides Slab consists of a rock mineral wool based core faced on the both sides with puncture resistant black tissue, used for structural elements such as roofs, concrete car park soffits and similar applications.
The black tissue facings on two sides helps to avoid t..
50mm Black Tissue Faced 2 Sides Knauf RS45 Insulation Slab
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
50mm White Tissue Faced One Side Rocksilk RS45 Slab is an acoustic rock mineral wool class A1 insulation slab, used for structural elements such as roofs, concrete car park soffits and similar applications.
The white tissue facing on one side helps to avoid the slab edges from showing as shadows ..
White Tissue Faced Knauf RS45 Insulation Slab 50x600x1200mm
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
50mm White Tissue Faced 2 Sides Rocksilk RS45 Slab is an acoustic rock mineral wool based, class A1 non-combustible insulation slab, used for structural elements such as roofs and concrete car park soffits.
Rocksilk RS45 50mm is a standard density (45kg/m3) insulation slab with a certified therma..
50mm White Tissue Faced 2 Sides Knauf RS45 Insulation Slab
From 30 up to 240 minutes fire protection (1200x600x50mm slab)
Class A1 Non-combustible Rock Mineral Wool Insulation Slab
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
White Tissue Faced 2 Sides Rockwool RW3 50mm is an insulation slab, a non-combustible stone wool board faced with white tissue on both sides, used as a fire resistant and thermal insulation for roofs and concrete car park soffits.
An unique white tissue facings on both sides helps to avoid the sl..
50mm Rockwool RW3 White Tissue Faced 2 Sides Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
50mm White Tissue Faced One Side Rockwool RW3 is an insulation slab, a non-combustible semi-rigid stone wool board faced with white tissue used as a fire resistant and thermal insulation for roofs and concrete car park soffits.
This special white tissue facing helps to avoid the slab edges from s..
50mm Rockwool RW3 White Tissue Faced 1 Side Insulation Slab
Strong A1 class, non-combustible fire resistant resin bonded slab
Provides from 30 minutes up to 240 minutes fire protection
Density 60kg/m3 Thermal conductivity (lambda) of 0.034 W/mK
For structural elements such as roofs, concrete car park soffits
50mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust medium density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Rockwool Insulatio..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
50mm White Tissue Faced 1 Side Rockwool RWA45 is an insulation slab, a non-combustible semi-rigid stone wool board faced with white tissue used as a fire resistant and thermal insulation for roofs and concrete car park soffits.
Rockwool RWA45 Insulation Slab 50x600x1200mm faced with white tissue ..
50mm Rockwool RWA45 White Tissue Faced One Side Slab x1
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
White Tissue Faced 2 Sides Rockwool RWA45 50mm is an insulation slab, a non-combustible stone wool board faced with white tissue both sides, used as a fire resistant and thermal insulation for roofs and concrete car park soffits.
50mm RWA45 White Tissue Faced Two Sides Slab is a standard density ..
50mm Rockwool RWA45 White Tissue Faced Two Sides Slab x2
Semi-rigid, A1 non-combustible fire resistant insulation slab
Provides from 30 minutes up to 240 minutes fire protection
Density 45kg/m3 Thermal conductivity (lambda) of 0.035W/mK
Used for structural elements such as concrete car park soffits
50mm Rockwool RWA45 Standard 45kg/m3 Insulation Slab is a robust, non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using Acoustic RWA45 Insulation in ceilings, walls and fl..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
60mm Black Foil Faced Rocksilk Knauf RS60 Slab is an insulation slab reinforced with an aluminium black foil facing to one side with the highest possible A1 fire rating.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that..
60mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
60mm Black Foil Faced Two Sides Knauf RS60 Slab is a non-combustible rock mineral wool black foil backed on both sides insulation slab with an excellent class A1 fire performance.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy speciall..
60mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
60mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil insulation slab provide..
60mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 60mm aluminium foil insu..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
60mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties