Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Boards achieving a Euroclass A1 rating under BS EN 13501-1 can be termed as non-combustible. Referred to as fire-retardant or calcium silicate boards, these non-combustible boards play a crucial role in preventing fire spread, preserving structural stability, and containing the spread of fire and smoke between spaces, ensuring safety for building occupants. They offer heightened fire protection for drylining, wall lining, and ceiling systems. Remarkably, these boards stand out by effectively blending resistance to humidity, mechanical robustness, and fire resistance, making them a rare combination in the market.
In fact, all A1 products are classified as non-combustible. A1-rated boards are not given smoke emission or flaming droplet ratings, on the assumption that they make no contribution to fire growth or spread. Moreover, Euroclass A1 products will not contribute in any stage of the fire including the fully developed fire. It is recommended using non-combustible boards for facade cladding on high-rise and high-risk buildings. Therefore, it is excellent option for buildings over 18m in height. Boards can be used in the construction industry providing from 30 up to 240 minutes fire protection.
NON-COMBUSTIBLE BOARDS INSTALLATION
A fire protective board alone cannot stop a fire. For the board to perform, it must be held in place with the correct types and distances of fixings, and different boards need to be correctly joined so that flames do not penetrate through any gaps. If a board shrinks or deforms to a significant degree, then more complex solutions are needed for the fixings and joints, such as mounting clips, metal substructures and joint fillers. This will show in the test reports and installation instructions of the board. If mounting instructions are not carefully followed, for example, by omitting or not carefully applying a required joint filler, or using the wrong type of fixing or a fixing distance larger than allowed, then the fire resistance during fire exposure will be drastically reduced.
NON-COMBUSTIBLE BOARD APPLICATIONS
Fire retardanant boad can be used in following applications such as:
Fire resistant partitions,
Garages,
Corridors,
Fire resistant ceilings suspended beneath wood,
Steel floors,
Concrete floors with direct fixing under wood floors,
Hotels,
Offices,
Public libraries,
Schools,
Court houses,
Hospitals,
Cinemas,
Shopfitting,
Bar fitting.
FIRE RETARDANT MANUFACTURERS | PRODUCTS
There are many different types of fire protective boards, with different production technologies and compositions. Some boards rely more on thermal insulation values, and some more on heat absorption, but in the end they all aim to maximize the temperature reduction on the cold side compared to the fireside. Different board types and a wide range of board thicknesses are available, each suited for specific fire safety applications. Apart from the fire resistance performance, each board type has specific advantages, such as easy installation, resistance against impact or resistance against weather exposure. We stock the strongest A1 non-combustible boards on the market so you can be sure you're getting the most durable cement board available.
RCM Y-WALL
Y-wall board is used primarily as a fire rated sheathing board or building board. Used extensively on both steel frame and timber frame structures, Y-wall is used behind all types of façade solutions, as well in ceilings offering a non-combustible classification.
SUPALUX
Supalux is the ultimate high-performance fire protection board from Promat. Supalux is a strong, lightweight non-combustible building board made of a calcium silicate composition. Board offers flexibility with between 30 to 240 minutes of fire protection.
MAGPLY
Magply fire board is a technically advanced magnesium oxide construction panel that provides exceptional performance in building applications combining superior reaction to fire performance, resilience, resistance to moisture and mould with some sound insulation. Boards are manufactured from naturally occurring materials, which are combined with alkaline resistant glass fibres for strength and integrity in a manufacturing process that produces very little in the way of CO2 emissions. Magply can be used as an alternative to wood, plywood, gypsum and cement based particle boards. It provides a dimensionally stable and reliable material with impressive fire performance for constructional uses.
PROMAT
Promat offers one of the most complete and efficient ranges of fire boards on the market. Promat boards include a number of features that set them apart from other building materials such as being resistant to humidity, fully tested and third party certificated. Boards are made by the world's leading producer of calcium silicate fire protection boards based on PROMAXON® patented technology. Most Promat boards are classified for a durability of 25 years (the best possible result) for internal application and, in some cases, even for semi-exposed application.
Sts board is a heavy-duty fibre cement board boasting impressive fire protection properties for applications both internally and externally. Achieving it’s Euro Class A1 Fire Rating put’s it into the league of boards with the highest level of fire rated performance within the construction industry. Along with this, you can achieve up to 118 minutes fire insulation burn time on a very simple party wall build up.
FIRE RESISTANCE REI MARKING |15 | 20 | 30 | 40 | 60 | 90 | 120 | 180 | 240 | 360 | MIN
The fire resistance is always expressed in minutes, usually in classes that are multiples of 30 minutes. For example, a fire protected load-bearing steel structure that can withstand fire for at least 90 minute. Fire protection classifications are normally reported in terms of a period of fire resistance. The resistance to fire is the ability of a structure or an individual compartment (external wall, beams, doors, and fire barriers, etc..) to resist a determined amount of time to its stability, integrity and isolation capability. Expression in minutes (15, 20, 30, 40, 60, 90, 120, 180, 240, and 360) about the nominal fire curve. Simply, this means how elements either in combination or individually stop a fire spreading, how they restrict temperature rise and how the elements load-bearing capacity is maintained. A range of solutions have been tested for use in a variety of fire-resistant applications, providing fire resistance periods ranging from 30 to 240 minutes to assist the design of safe buildings. For the classification of the elements not meeting the criteria R, it is automatically sufficient as long as E and I are met. The REI marking identifies the fire-resistance rating of a structure and consists of the following elements:
R - Load-bearing.The ability of a construction element to preserve its mechanical characteristics and the relevant load capacity during a normal fire.
E - Integrity.In other words, the structures ability to NOT allow the passage or production of gas or vapor to the area NOT exposed to the fire.
I - Thermal Insulation.To clarify, the ability of a structure to reduce within a temperature limits the transfer of heat to the unexposed (cold) side. The temperature limit is usually 140°C.
EUROCLASS SYSTEM VS CLASS 0
The Euroclass system defining the fire performance of building products came into existence in the year 2000. It was introduced by the European Union (EU) to remove trade barriers between individual member states. Before the introduction, manufacturers had to test building products in individual countries. All of them had their own unique testing methods to define the fire performance of a product. For instance, a company from Germany which wanted to sell facade cladding panels in the UK and France, had to get their products tested in both countries in order to obtain approval to enter these markets. The EU solved this situation by introducing a classification system that applied to all member states. However, this created new problems in streamlining existing national regulations with this Euroclass system. In the UK Building Regulations on fire safety (1991), a classification was introduced for materials used in wall and ceiling linings to determine the surface spread of flames, with Class 4 being the worst and Class 1 being the best (the least distanced and slowest spreading of flames). Class 0 indicates a Class 1 spread of flames and also takes into account the (limited) amount of heat released from the surface of a product. When the Euroclass system was introduced, countries such as the UK faced a transition period where both the existing national standards were referred to alongside the mandatory harmonised European classification. In UK building regulations, although only meant to be a transition period, both systems were used alongside each other, a situation that exists still to this day. This causes serious problems, because Class 0 simply does not indicate the same performance as the Euroclass system does. Generally speaking, non-combustible simply means that a material does not contribute to a fire. Combustible materials have a higher calorific value than non-combustible materials and can therefore contribute to the spread of a fire. In the Euroclass system, classes B to F are combustible. The Euroclass system, which is the leading standard in Europe for fire safety classification of building materials, consists of the levels A1, A2, B, C, D, E and F. Levels from B to F are for combustible materials, although there is quite a wide variety between them. The gradation of non-combustibility is determined by the Euroclass system, where classes A1 and A2 are non-combustible and B-F combustible. A1 and A2 classifications can be given on the basis of a successful non-combustibility test. The calorific value is defined here, which should be of a very low value. The Euroclass system is based on a stacked level of testing: with every class, there are more strict rules to comply with. In class F, either nothing is tested or a product failed to achieve a higher level. Class E only tests with a small flame for a short time. For classes D to B, the method of SBI-testing is used. Lower classifications (Euroclass C to F) are even less fire safe. An F classification even means the material hasn’t managed to pass any of the tests for a higher class.
9mm RCM Multipurpose Cellulose Fibre Cement Board A1 is a strong fire rated cellulose fibre-cement building board that offers outstanding strength, weathering and acoustic properties making it an excellent option for buildings over 18m in height.
Multipurpose boards are suitable for the following..
External Cladding - Flooring and Ceilings
BBA Approved - High Impact Resistance
Fire Rated to EN 13501-1 Class A1 Non-Combustible
Cellulose Fibre-Cement Superflex Building Board
RCM Multipurpose can be used as a Tile Backer Board
9mm RCM Siltech Fire Rated Flexible Board is a non-combustible calcium silicate building board which provides from 60 to 120 minutes fire rating and superior workability due to a unique fibre reinforced formulation.
RCM Siltech 9mm can be used in an extensive range of applications from fire rated..
9mm RCM Y-Wall Fire Rated Sheathing Board is an A1 non-combustible flexible calcium-silicate cement based sheathing board designed for use in ceilings, partitions, exterior cladding and as a sheathing board for buildings over 18meters in height.
RCM Y-WALL High Performance Board 9mm is a BBA cert..
Fire rated, Class A1 Non-combustible
RCM Y-Wall Fibre Cement Building Board
BS EN 13501-1 Class A1 to EN 13501-1
For buildings over 18meters in height
Flexible calcium-silicate cement based sheathing board
9mm Magply Fire Rated Render Carrier Board is an A1 class non-combustible render carrier board which is manufactured from magnesium silicate coated with magnesium oxide to provide fire safety, durability, integrity and strength.
Magply 2400mm x 1200mm x 9mm is designed to accept direct render app..
9mm Magply Fire Rated Render Carrier Board
Fire, moisture and impact resistant board
Designed to accept direct render applications
Provides fire safety, durability, integrity and strength
Fire-safe alternative to regular plywood, OSB or wood
60mm Rockwool Ablative Coated Batt FIREPRO is a strong and durable pre-coated on both sides stone wool fire insulation batt with an outstanding fire performance that can be installed across a variety of services and substrates.
Rockwool Ablative Coated Batt fire resistant insulation offering up t..
12.5mm Siniat Weather Defence™ (A1 Non-combustible) 3000mm x 1200mm is an External Sheathing Board used for external sheathing applications in steel or timber frame construction with rainscreen, insulated render, brick or block facade systems.
Weather Defence Siniat is a revolutionary facade exte..
12.5mm Siniat GTEC Weather Defence™
Siniat Façade Board Class ‘0’ to UK Building Regulations
Fire classification: A1 Non-combustible (Fire Rated Board)
3000mm x 1200mm x 12.5mm External Sheathing Board
Strong, compliant for structures above 18m in height
100mm Foil Faced 2 Sides Insulation Slab Rockwool RW4 is an insulation slab with the highest class A1 fire rating, a rigid non-combustible stone wool based insulation used where fire performance is crucial.
Rockwool RW4 Foil Faced Two Sides Slab 100mm x 600mm x 1200mm fire performance integrity i..
Foil Faced x2 Sides Rockwool RW4 (80kg/m3) A1 Class 1200x600x100mm
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4 (FFx2)
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations (FFx2)
Fire performance integrity is 240 minutes, and 60 minutes for the insulation core
100mm Foil Backed Slab Rockwool RW4 80kg/m3 is an insulation slab with the highest class A1 fire rating, a rigid non-combustible stone wool based insulation used where fire performance is crucial.
Rockwool RW4 Foil Faced Slab 100mm x 600mm x 1200mm fire performance integrity is 240 minutes, and 6..
Foil Faced x1 Side Rockwool RW4 (80kg/m3) A1 Class 1200x600x100mm
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations
Fire performance integrity is 240 minutes, and 60 minutes for the insulation core
100mm Rockwool RW4 (80kg) is a stone wool fire resistant thermal and acoustic insulation slab with the highest possible class A1 non-combustible fire rating used for a wide range of building applications.
Rockwool Stone Wool Insulation Slab if correctly installed exceeds the minimum requirements ..
100mm x 600mm x 1200mm Rockwool RW4 (80kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
106mm Promat TL Bevelled Edge Board is a fire rated calcium silicate board bonded to Kingspan insulation core designed to be fixed to the underside of concrete floors to achieve specific U-values required by the Building Regulations.
TL Promat 2397mm x 1197mm x 106mm Board is an excellent solutio..
Promat TL Board Bevelled Edge
Non-combustible CFC’s and HCFC’s Free
Euroclass Fire Classification A1
High-quality moisture resistant board
Class 0 Building Regulations Calcium-silicate Board
PROMATECT–H Promat 10mm is a cement bonded calcium silicate based non-combustible matrix engineered mineral insulation board reinforced with selected fibres and fillers that does not contain formaldehyde matrix.
10mm Fire Board Promatect-H can be used as a fire protection of steel and concrete st..
10mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
12.5mm Glasroc F MultiBoard British Gypsum (GRG) is a highly versatile, non-combustible, Class A1 and Class 0 glass-reinforced gypsum based impact resistant fire protection board that is suitable for constructing all forms of ceilings and partitions, including curved wall applications.
British Gy..
Magply Fire Rated A1 Render Carrier Board 12mm is a technically advanced, non-combustible render carrier board which is manufactured from magnesium silicate coated with magnesium oxide to provide fire safety, durability, integrity and strength.
12mm x 1200mm x 2400mm Magply Board is designed to a..
12mm Magply Fire Rated Render Carrier Board
Fire, moisture and impact resistant board
Designed to accept direct render applications
Provides fire safety, durability, integrity and strength
Fire-safe alternative to regular plywood, OSB or wood
12mm Kemwell FireKem FP-900 is a calcium silicate fire protection board that provides superior fire resistance performance for commercial and industrial building projects.
This fire rated board is a perfect solution for internal partitions, external walls, roofs, floors and ceilings, and is parti..
12mm Kemwell FireKem FP-900 Fire Protection Board
Calcium Silicate A1 Non-combustible Fire Rated Board
Approved for up to 240 minutes fire resistance (BS 476: Part 22)
Internal partitions, external walls, roof, floor, ceiling and dry wall
Very good acoustic reduction performance of between 26-49dB
12mm Kemwell MultiKem MP-1000 Calcium Silicate Board is a fire resistant A1 class non-combustible multi-purpose building board used for interior and semi-exposed applications.
Kemwell MultiKem MP-1000 is a fire, moisture and impact resistant board that provides up to 120 minutes fire resistance a..
12mm Kemwell MultiKem MP-1000 Fire Protection Board
Calcium Silicate A1 Non-combustible Fire Rated Board 12mm
Building board used for interior and semi-exposed applications
Moisture and impact resistant non-combustible fire board
MultiKem MP-1000 provides up to 120 minutes fire resistance
12mm Masterboard Promat Fire Protection Board is a versatile, fire and moisture resistant reinforced calcium silicate class 0 building board formulated without inorganic fibres, providing up to 30 minutes fire resistance in internal and semi exposed applications.
Multi-purpose MASTERBOARD 2440mm ..
12mm Cemplate Ultimate Render Carrier Board is a superior building board used as an external sheathing on timber frame, modular and steel frame (SFS) constructions prior to the install of a render and external facade system.
CemPlate is a unique building board with exceptional dimensional stabili..
12mm CemPlate Multi-Purpose External Sheathing Board Class A1 Fire Rated
Designed for modular builds, external sheathing and as a render carrier board
CemPlate high performance board for both indoor and outdoor applications
Highly resistant to impact, damp, effects of sunlight, moisture and water
Provides strong and durable substrate for rendering and cladding systems
12mm Promat PROMAFOUR Non-combustible Board 2500mm x 1250mm is a non-combustible cement bonded calcium silicate board formulated without inorganic fibres or formaldehyde suitable for fireplaces and wood burning stoves.
The PROMAFOUR® board has achieved A1 class, which is the highest fire rating ..
Application: Fireplaces and wood burning stoves
Fire Rating (Reaction to Fire): A1(Non-combustible)
Fire Protection (Resistance to Fire): 240minutes
Naturally smooth surface that can be easily decorated
Resists continuous high temperatures of up to 1000°C
12mm Promat Supalux A1 Fire Rated is an original fire protection board Class A1 with up to 240 minutes fire rating and improved moisture resistance that can be used in steel and timber frame, mezzanine floors, shaft-wall and doors installations.
SUPALUX 12mm is a strong, lightweight reinforced wi..
RCM Multipurpose Class A1 Fire Rated Cement Board 12mm is an A1 non-combustible cellulose fibre-cement building board that offers outstanding strength, weathering and acoustic properties making it an excellent option for buildings over 18m.
12mm Multipurpose boards are suitable for the following ..
Coloured Render Systems - EWI
BBA Approved - High Impact Resistance
Fire Rated to EN 13501-1 Class A1 Non-Combustible
Render Carrier Board - Superflex Building Board
RCM Multipurpose can be used as a Tile Backer Board
12mm RCM Siltech Fire Rated Non-combustible Board is a flexible calcium silicate building board which provides from 60 to 120 minutes fire rating and superior workability due to a unique fibre reinforced formulation.
RCM Siltech 12mm can be used in an extensive range of applications from fire rat..
12mm RCM Y-Wall Calcium Silicate Cement Sheathing Building Board A1 is a fire rated flexible cement based sheathing board designed for use in ceilings, partitions, exterior cladding and as a sheathing board for buildings over 18m in height.
RCM Y-WALL Fire Rated Sheathing Board 12mm is a BBA cert..
Fire rated, Class A1 Non-combustible
RCM Y-Wall Fibre Cement Building Board
BS EN 13501-1 Class A1 to EN 13501-1
For buildings over 18meters in height
Flexible calcium-silicate cement based sheathing board
15mm Fermacell Firepanel is used in internal applications for structural fire protection in the wall and ceiling area, an A1 class non-combustible fire protection board.
Firepanel A1 is a new dimension in fire protection for dry linings, an innovative development of the original Fermacell Gypsum..
15mm Fermacell Firepanel Class A1 Non Combustible Fire Protection Board
Homogeneous fibre-reinforced gypsum based dry lining fire protection board
Firepanel is reinforced with non-flammable fibres for superior fire protection
Fully complies with construction building materials class A1 non-combustible
Firepanel partition system to EN 1364-1 provides 60 minutes fire rated lining
20mm Promat Promatect 250 Fire Insulation Board is a strong and durable A1 non-combustible low density calcium-silicate board made with PROMAXON® technology, used for protection of steel structures and mezzanine floors.
Promat PROMATECT 250 is a 20mm thick, 2500mm long by 1200mm wide calcium sili..
20mm Promat PROMATECT 250 Fire Protection Board
A1 non-combustible low density calcium-silicate insulation board
PROMATECT®-250 is made with special PROMAXON® technology
Used for protection of steel structures and mezzanine floors
Provides up to 150 minutes fire protection to structural steelwork
25.4mm Promat MONOLUX 500 (MST 500) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 500 High Performance Fire Rated Board is a special, tough and durable, resistan..
Easy to Decorate with Paints, Wallpapers or Tiles
Monolux 500 - providing up to 240 minutes Fire Resistance
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
25mm Glasroc F FireCase Fire Protection Board British Gypsum is a highly versatile, non-combustible, Class A1 and Class 0 glass-reinforced gypsum based plasterboard used mostly as part of the FIRECASE frameless structural steel encasement system, giving up to 120 minutes fire protection and in the G..
Promat MONOLUX 800 Fire Protection Board (MST 800) 25mm is a special low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
25mm Promat Monolux 800 High Performance Fire Board is a tough and..
Monolux 800 - providing up to 240 minutes Fire Resistance
MST-800 - 1000°C - Easy to Decorate with Paints, Wallpapers or Tiles
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
25mm PROMATECT-MST Fire Protection Board is a non-combustible fire insulation board specifically formulated without asbestos and mineral fibres used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST 25mm is an effective and..
25mm Promat PROMATECT®-MST A1 Fire Resistant Board
Stable fire insulation solution for demanding applications
High strength even when exposed to high temperature of 1000ºC
Fire insulation board with up to 240min fire resistance (protection)
Insulation in ovens and dryers, Heat shield, Structural thermal break
Promat VERMICULUX-S Fire Protection Board 30mm x 1200mm x 2500mm is an attractive smooth finish A1 non-combustible calcium-silicate insulation board which provides up to 240 minutes fire protection to structural steel structures.
VERMICULUX-S is used to protect one, two, three or four sided encas..
35mm Promat PROMATECT-L500 Fire Protection Calcium Silicate Board is a versatile non-combustible low density fire insulation board designed specially for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
The Promatect L..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
40mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 40mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
40mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 40mm aluminium fo..
40mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 40mm foil backed slab pr..
40mm Foil Faced on Both Sides Rocksilk RS100 Knauf Fire Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil faced two sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 40mm a..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame Non-combustible
Provides excellent fire, thermal and acoustic performance.
40mm Knauf RS45 Black Foil Backed Two Sides Slab is an insulation solution specially designed for concrete soffits, an A1 class non-combustible rock mineral wool slab.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new build an..
40mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
40mm Knauf Rocksilk RS45 Black Foil Backed Slab is an insulation solution specially designed for concrete soffits, an A1 class non-combustible rock mineral wool insulation slab.
Knauf RS45 1200mm x 600mm x 40mm black foil backed slab provides outstanding fire, thermal and acoustic performance for..
40mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
40mm Promat PROMASIL-1000L is a calcium-silicate fire insulating board with very good thermal properties and thermal stability up to 1000°C, used in the fireplaces, wood burning stoves and Promat PROMAFOUR® systems.
Promat PROMASIL-1000L Boards are often used in heavy industry for anode baking fu..
40mm Promat PROMASIL-1100 SUPER is a fire insulating sheet with very good thermal properties and thermal stability up to 1050°C, used in the fireplaces, wood burning stoves and Promat PROMAFOUR® fireplace systems.
PROMASIL-1100 SUPER Boards are suitable for multiple uses in single layer systems f..
40mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C
Fireplaces, Wood Burning Stoves, PROMAFOUR® fireplace systems
Very good thermal properties and thermal stability up to 1050°C
Extra low thermal conductivity calcium-silicate fire insulation board
Multiple uses in single layer systems for penetration seals in walls and slabs
40mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) non-combustible rock mineral wool unfaced rigid slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
40mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material designed for use in multiple applications..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
40mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust, medium-density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Insulation in cei..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
40mm Rockwool RWA45 Acoustic Insulation Slab (Prorox SL920) is a non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using RWA45 Rockwool Insulation in ceilings, walls and flo..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
50mm Black Foil Faced RS60 Knauf Slab is an aluminium black foil faced to one side insulation slab with an excellent class A1 fire performance used for concrete soffits.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that..
50mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
50mm Black Foil Faced x2 Sides RS60 Knauf is a fire non-combustible insulation slab faced with a composite black foil on two sides providing an excellent class A1 fire performance.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy special..
50mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
50mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil slab provides outstandi..
50mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 50mm aluminium foil insu..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
50mm RS140 Knauf Rocksilk is a non-combustible rock mineral wool insulation slab with the best possible Euroclass A1 reaction to fire classification used in multiple thermal and acoustic applications.
RS140 Rocksilk is manufactured with a density of 140kg/m3, designed for use in a variety of appl..
50mm x 600mm x 1200mm Knauf Rocksilk RS140 (140kg/m3)
Class A1 Non-combustible Rigid Rock Mineral Wool Insulation Slab
Fire, thermal and acoustic insulation slab used for building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceiling, timber & steel frame
50mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
50mm Rockwool RW5 Insulation Slab (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant acoustic insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using Rockwool RW5 Insulation in ..
RW5 is rated Euroclass A1 non-combustible
Excellent thermal, Acoustic (100kg density) and fire performance
50mm Terrawool TW50 Sound Insulation Slab is a standard density (50kg/m3) non-combustible thermal and acoustic stone wool insulation slab used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab is a high-performance recyclable and dur..
70mm Knauf Rocksilk Flexible Insulation Slab is a thermal and acoustic multi-purpose rock mineral wool insulation slab which can be used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Knauf Flexible is non..
75mm Rockwool RW6 Foil Faced x2 Sides Slab is an insulation suitable for a wide range of applications, an A1 class non-combustible insulation slab with an excellent fire, thermal and acoustic properties.
Foil Faced Two Sides (FFx2) Rockwool RW6 75x600x1200mm fire performance integrity is 240 minu..
75mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
75mm Rockwool RW6 is a versatile slab suitable for a wide range of building applications, an A1 non-combustible resin bonded insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Slab is manufactured in 140kg density per cubic meter (140kg/m3), specially designed for us..
75mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
75mm Rockwool RW6 Foil Faced 1 Side is an insulation slab suitable for a wide range of building applications, an A1 non-combustible insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Foil Faced x1 Side Slab 75x600x1200mm fire performance integrity is 240 minutes, and..
75x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
80mm Rockwool DD External Wall Dual Density Slab is a façade thermal and acoustic insulation slab developed for insulated render systems in new build and refurbishment projects to prevent the spread of fire.
Rockwool DD is a high-performance, non-combustible stone wool slab used to insulate the w..
81mm Soffit Liner Insulated Panel (75mm RWA45 & 6mm Masterboard) is a high performance class A1 soffit liner insulation board that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using high performing, non-combustible ..
81mm Soffit Liner Insulation Board A1 Class Non-combustible
75mm Rockwool RWA45 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
81mm Soffit Linerboard Insulation Slab (75mm RW5 and 6mm Masterboard) is used to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RW5 insulation slab faced with 6mm Promat Masterboard (fire..
81mm Soffit Liner Insulation Board A1 Class Non-combustible
75mm Rockwool RW5 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
87mm Soffit Liner Panel A1 (75mm RWA45 & 12mm Masterboard) is an ultimate class A1 soffit liner insulation board that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RWA45 insulation slab..
87mm Soffit Liner Insulation Board A1 Class Non-combustible
75mm Rockwool RWA45 bonded to 12mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
Kemwell WeatherKem External Sheathing Board is a 9mm thick, A1 class calcium silicate building board, combining weather, moisture and fire resistance properties with high impact strength and sound insulation.
The WeatherKem Sheets are BBA certified, category A weather-proof rated building boards ..
9mm Kemwell WeatherKem Fibre Cement Class A1 Board
External sheathing board for interior and exterior applications
WeatherKem is combining weather, moisture and fire resistance properties
High impact strength and sound insulation between 26dB and 44dB
Internal lining on partitions, claddings, flooring, ceilings and sheathing
100mm Rockwool RW6 (140kg) is suitable for a wide range of general building applications, a rigid class A1 resin bonded stone wool insulation slab with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Slab is manufactured in 140kg density per cubic meter (140kg/m3), specially desi..
100mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
100mm Foil Backed on Both Sides Rockwool RW6 is a foil faced on 2 sides insulation used where fire rating is crucial, an A1 rigid insulation slab with an excellent fire, thermal and acoustic properties.
Foil Faced Two Sides (FFx2) Rockwool RW6 100x600x1200mm fire performance integrity is 240 minu..
100mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
Foil Backed Rockwool RW6 is a 100mm thick foil faced on one side insulation slab used where fire rating is crucial, a rigid class A1 insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Foil Faced x1 Side Slab 100x600x1200mm fire performance integrity is 240 minutes, a..
100x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
106mm Soffit Liner Insulated Panel (100mm RWA45 & 6mm Masterboard) is a class A1 non-combustible soffit liner insulation board that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using high performing, non-combustible..
106mm Soffit Liner Insulation Board A1 Class Non-combustible
100mm Rockwool RWA45 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
106mm Soffit Linerboard Insulation A1 (100kg RW5 Slab) is a class A1 non-combustible soffit board used to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RW5 insulation slab faced with 6mm..
106mm Soffit Liner Insulation Board A1 Class Non-combustible
100mm Rockwool RW5 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
112mm Soffit Liner Insulation Board (100mm RWA45 & 12mm Masterboard) is an advanced class A1 soffit liner insulation that provides effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RWA45 insulation ..
112mm Soffit Liner Insulation Board A1 Class Non-combustible
100mm Rockwool RWA45 bonded to 12mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
126mm Promat TL Bevelled Edge Board is a premium phenolic insulation core bonded to calcium silicate board that is designed to achieve specific U-values required by the project design and Building Regulations.
TL Promat 2397mm x 1197mm x 126mm Board is an excellent solution to the increasing requ..
Promat TL Board Bevelled Edge
Non-combustible CFC’s and HCFC’s Free
Euroclass Fire Classification A1
High-quality moisture resistant board
Class 0 Building Regulations Calcium-silicate Board
WeatherKem Kemwell A1 Fibre Cement Board 12mm is a strong calcium silicate external sheathing board, combining weather, moisture and fire resistance properties with high impact strength and sound insulation.
The WeatherKem Sheets are BBA certified, category A weather-proof rated building boards s..
12mm Kemwell WeatherKem Fibre Cement Class A1 Board
External sheathing board for interior and exterior applications
WeatherKem is combining weather, moisture and fire resistance properties
High impact strength and sound insulation between 26dB and 44dB
Internal lining on partitions, claddings, flooring, ceilings and sheathing
Promat PROMATECT®-H Calcium Silicate Fire Resistant Board is a 12mm x 1250mm x 2500mm non-combustible matrix engineered mineral fireboard reinforced with selected fibres and fillers that does not contain formaldehyde.
12mm Fire Board Promatect-H can be used as a fire protection of steel and concr..
12mm PROMATECT®-H Promat Calcium Silicate Fire Protection Board
Matrix engineered fire board - temperature classification of 400ºC
Up to 4 hours (240 min) fire protection for some fire resistant systems
Off-white colour | Smooth finish on one face with a Sanded reverse face
Can be left undecorated or easily finished with paints | 2500mm x 1250mm
15mm Fire Rated Calcium Silicate Board RCM Y-Wall Class A1 is a high-quality flexible calcium-silicate cement sheathing board designed for use in ceilings, partitions, exterior cladding for buildings over 18meters in height.
RCM Y-WALL Fire Rated Sheathing Board 15mm is a BBA certified building b..
Fire rated, Class A1 Non-combustible
RCM Y-Wall Fibre Cement Building Board
BS EN 13501-1 Class A1 to EN 13501-1
For buildings over 18meters in height
Flexible calcium-silicate cement based sheathing board
Kemwell FireKem FP-900 Fire Protection Board 15mm is a high-performance A1 non-combustible calcium silicate fire protection board used for commercial and industrial projects.
This fire rated board is a perfect solution for internal partitions, external walls, roofs, floors and ceilings, and is pa..
15mm Kemwell FireKem FP-900 Fire Protection Board
Calcium Silicate A1 Non-combustible Fire Rated Board
Approved for up to 240 minutes fire resistance (BS 476: Part 22)
Internal partitions, external walls, roof, floor, ceiling and dry wall
Very good acoustic reduction performance of between 26-49dB
RCM Siltech Fire Rated Board 15mm is a non-combustible flexible calcium silicate fibre cement board which provides 60 to 120 minutes fire rating and superior workability due to a unique fibre reinforced formulation.
15mm RCM Siltech can be used in an extensive range of applications from fire rate..
15mm Supalux Class A1 Fire Rated is an original fire protection board Class A1 with up to 240 minutes fire rating and improved moisture resistance that can be used in steel and timber frame, mezzanine floors, shaft-wall and doors installations.
PROMAT SUPALUX 15mm is a strong off-white in colour ..
20mm Magply Fire Rated A1 Render Carrier Board is a technically advanced, multi-functional render board which is manufactured from magnesium silicate coated with magnesium oxide to provide fire safety, durability, integrity and strength.
Magply Board 20mm x 1200mm x 2400mm is designed to accept d..
20mm Magply Fire Rated Render Carrier Board
Fire, moisture and impact resistant board
Designed to accept direct render applications
Provides fire safety, durability, integrity and strength
Fire-safe alternative to regular plywood, OSB or wood
PROMATECT 250 Promat Fire Protection Board 22mm is a hybrid development of matrix engineered mineral and gypsum board using PROMAXON® technology, an A1 class board used for protection of steel structures and mezzanine floors.
Promat PROMATECT 250 is a 22mm thick, 2500mm long by 1200mm wide calciu..
22mm Promat PROMATECT 250 Fire Protection Board
A1 non-combustible low density calcium-silicate insulation board
PROMATECT®-250 is made with special PROMAXON® technology
Used for protection of steel structures and mezzanine floors
Provides up to 150 minutes fire protection to structural steelwork
30mm Glasroc F FireCase Fire Protection Board British Gypsum is a highly versatile, non-combustible, Class A1 and Class 0 glass-reinforced gypsum based plasterboard used mostly as part of the FIRECASE frameless structural steel encasement system, giving up to 120 minutes fire protection and in the G..
30mm Fire Insulation Board Promat MONOLUX 800 (MST 800) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 800 High Performance Fire Board 30mm is a tough and durable..
Monolux 800 - providing up to 240 minutes Fire Resistance
MST-800 - 1000°C - Easy to Decorate with Paints, Wallpapers or Tiles
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
Promat Promatect-MST 30mm is a fire resistant insulation board specifically formulated without asbestos and mineral fibres used as a thermal break in process plants and as single skin insulation in ovens and dryers.
30mm Fire Protection Board Promatect-MST is an effective and stable fire insulati..
30mm Promat PROMATECT®-MST A1 Fire Resistant Board
Stable fire insulation solution for demanding applications
High strength even when exposed to high temperature of 1000ºC
Fire insulation board with up to 240min fire resistance (protection)
Insulation in ovens and dryers, Heat shield, Structural thermal break
31.8mm Promat MONOLUX 500 Fire Board (MST 500) is a special low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 500 High Performance Board 31.8mm is a tough and durable, resistant..
Easy to Decorate with Paints, Wallpapers or Tiles
Monolux 500 - providing up to 240 minutes Fire Resistance
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
35mm VERMICULUX-S Promat Fire Protection Board is a moisture resistant, A1 non-combustible board which provides up to 240 minutes fire protection for buildings storing high value items or assets, including museums and data centres.
VERMICULUX-S is used to protect one, two, three or four sided enc..
40mm Promat PROMATECT-L500 (Fire Protection Board) is a special non-combustible low density calcium silicate fire insulation board, used for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
Promat L500 PROMATECT 40mm i..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
50mm Black Foil Faced Knauf RS45 is a fire-resistant thermal and acoustic insulation slab specially designed for concrete soffits, an A1 class non-combustible rock mineral wool.
Knauf RS45 1200mm x 600mm x 50mm black foil backed slab provides outstanding fire, thermal and acoustic performance for..
50mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
50mm Black Foil Faced 2 Sided Knauf RS45 is a fire, thermal and acoustic insulation slab specially designed for concrete soffits, an A1 class non-combustible rock mineral wool.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new..
50mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
50mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 50mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
50mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 50mm aluminium fo..
50mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 50mm foil backed slab pr..
50mm Foil Faced on Both Sides Rocksilk RS100 Knauf Fire Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil-faced two-sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200 x 600 x 50mm alumi..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations Euroclass A1
Density 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible material
Provides excellent fire, thermal and acoustic performance.
PROMASIL-1000L 50mm Fire Rated Insulation Board Promat is a mechanically strong and vibration proof fire insulation board with very good thermal properties and thermal stability up to 1000°C, used in the fireplace systems.
Promat PROMASIL-1000L Boards are often used in heavy industry for anode ba..
PROMASIL-1100 SUPER 50mm Fire Insulation Board is used in the fireplaces and stoves construction, a strong and vibration proof fire insulation board with very good thermal properties and thermal stability up to 1050°C.
50mm Promat PROMASIL-1100 SUPER Boards are suitable for multiple uses in singl..
50mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C
Fireplaces, Wood Burning Stoves, PROMAFOUR® fireplace systems
Very good thermal properties and thermal stability up to 1050°C
Extra low thermal conductivity calcium-silicate fire insulation board
Multiple uses in single layer systems for penetration seals in walls and slabs
50mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) non-combustible rock mineral wool unfaced rigid slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
50mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material designed for use in multiple applications..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
50mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust medium density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Rockwool Insulatio..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
50mm Rockwool RWA45 Standard 45kg/m3 Insulation Slab is a robust, non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using Acoustic RWA45 Insulation in ceilings, walls and fl..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
60mm Black Foil Faced Rocksilk Knauf RS60 Slab is an insulation slab reinforced with an aluminium black foil facing to one side with the highest possible A1 fire rating.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that..
60mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
60mm Black Foil Faced Two Sides Knauf RS60 Slab is a non-combustible rock mineral wool black foil backed on both sides insulation slab with an excellent class A1 fire performance.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy speciall..
60mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
60mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil insulation slab provide..
60mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 60mm aluminium foil insu..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
60mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
60mm Terrawool TW50 Sound Insulation Slab is a standard density (50kg/m3) non-combustible thermal and acoustic stone wool insulation slab used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab is a high-performance recyclable and dur..
75mm Knauf Rocksilk® RS140 Insulation Slab is a unique non-combustible mineral wool slab manufactured using Knauf bio-based binder ECOSE Technology with the best possible class A1 reaction to fire.
RS140 Rocksilk is manufactured with a density of 140kg/m3, designed for use in a variety of applica..
75mm x 600mm x 1200mm Knauf Rocksilk RS140 (140kg/m3)
Class A1 Non-combustible Rigid Rock Mineral Wool Insulation Slab
Fire, thermal and acoustic insulation slab used for building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceiling, timber & steel frame
75mm Rockwool RW5 Acoustic, Thermal and Fire Insulation Slab (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant acoustic insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using ..
RW5 is rated Euroclass A1 non-combustible
Excellent thermal, Acoustic (100kg density) and fire performance
90mm Knauf Rocksilk Flexible Insulation Slab is an easy to install rock mineral wool insulation slab used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Flexible Slab has been tested to provide 60 minutes ..
90mm Rockwool DD External Wall Dual Density Slab is a façade thermal and acoustic insulation slab developed for insulated render systems in new build and refurbishment projects to prevent the spread of fire.
Rockwool DD is a high-performance, non-combustible stone wool slab used to insulate the w..
MultiKem MP-1000 Kemwell 15mm x 1200mm x 2400mm Board is an easy to install, class A1 non-combustible fire resistant building board used for interior and semi-exposed applications.
15mm Kemwell MultiKem MP-1000 is a fire, moisture and impact resistant board that provides up to 120 minutes fire re..
15mm Kemwell MultiKem MP-1000 Fire Protection Board
Calcium Silicate A1 Non-combustible Fire Rated Board 15mm
Building board used for interior and semi-exposed applications
Moisture and impact resistant non-combustible fire board
MultiKem MP-1000 provides up to 120 minutes fire resistance
100mm Rock Mineral Wool Knauf RS140 is an unfaced insulation slab with the best possible Euroclass A1 reaction to fire classification designed for use in multiple applications where density is critical.
RS140 Rocksilk is manufactured with a density of 140kg/m3, designed for use in a variety of ap..
100mm x 600mm x 1200mm Knauf Rocksilk RS140 (140kg/m3)
Class A1 Non-combustible Rigid Rock Mineral Wool Insulation Slab
Fire, thermal and acoustic insulation slab used for building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceiling, timber & steel frame
100mm Knauf Rocksilk Flexible Insulation Slab is a multi-purpose rock mineral wool insulation slab used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Knauf Flexible 100mm is non-combustible flexi insulati..
100mm Rockwool DD External Wall Dual Density Slab is a façade thermal and acoustic insulation slab developed for insulated render systems in new build and refurbishment projects to prevent the spread of fire.
Rockwool DD is a high-performance, non-combustible stone wool slab used to insulate the ..
100mm Rockwool RW5 Acoustic Insulation Slab (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant acoustic insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using Rockwool RW5 1200..
RW5 is fire rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance (100kg/m3)
120mm Rockwool RW6 is an extremely dense insulation slab manufactured in density of 140kg/m3, an A1 class non-combustible stone wool insulation with an excellent fire and acoustic properties.
Rockwool RW6 Slab is specially designed stone wool (molten rock and minerals) insulation used in floors, ..
120mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
120mm Rockwool RW6 Foil Faced 1 Side Slab is an extremely dense reinforced aluminium foil backed insulation manufactured in density of 140kg/m3, an A1 class non-combustible stone wool insulation.
Rockwool RW6 Foil Faced x1 Side Slab 120x600x1200mm fire performance integrity is 240 minutes, and 60..
120x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
120mm Foil Faced Two Sides Slab Rockwool RW6 is an extremely dense (140kg/m3) faced with reinforced aluminium foil on both sides insulation slab, an A1 class non-combustible stone wool fire insulation.
Foil Faced Two Sides (FFx2) Rockwool RW6 120x600x1200mm fire performance integrity is 240 minut..
120mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
156mm High Impact Soffit Linerboard Insulation Slab A1 is a non-combustible soffit liner board used to provide effective fire resistance, acoustic and thermal insulation for concrete soffits.
Soffit Liner Boards are manufactured using non-combustible Rockwool RW5 insulation slab faced with 6mm Pr..
156mm Soffit Liner Insulation Board A1 Class Non-combustible
150mm Rockwool RW5 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits
The 156mm Soffit Liner Board is a highly effective combination of 50mm and 100mm Rockwool RWA45 Insulation Slab bonded to 6mm Masterboard used to provide fire resistance, acoustic and thermal insulation.
This unique combination of two non-combustible class A1 fire rated products provides increase..
156mm Soffit Liner Insulation Board A1 Class Non-combustible
50 and 100mm Rockwool RWA45 bonded to 6mm Masterboard Promat
Up to 180 min Fire Protection - Easy to decorate with paints, wallpapers or tiles
Increased impact resistance and durability in addition to improved fire safety
Effective fire resistance, acoustic and thermal insulation for concrete soffits