Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Floor insulation is one of the best forms of building insulation due to the fact that as much as 20-30% of heat, escapes through floor elements. Moreover, it is building material maintenance-free once installed. By installing floor insulation, you not only improve the thermal envelope of the building but also you create a complete seal around the building. At the same time you reduce the potential for heat to escape. As well as reducing heat loss, installing floor insulation can also help to minimise sounds created by floorboards, reduce drafts and create a warmer floor surface. For information on how to cut PIR click here. To find out what is the best floor insulation click here.
FLOOR INSULATION THICKNESSES
The building regulations require that floors achieve minimum thermal performance U-values and this affects the amount of insulation required. Achieving a U-value of 0.25 W/m2K or less would require at least 70mm of Phenolic high-performance foam insulation called Kingspan® K103, 150mm of Knauf® or Rockwool® Mineral Wool and 200mm ofEPS100 polystyrene. In the case of PIR Rigid Insulation Boards, thickness of 120mm is normally used. In terms of XPS boards such as Soprema SL or STS, 50mm thickness is sufficient for the floor insulation.If you are concern about compressive strength of the floor insulation material, you should consider buying XPS extruded polystyrene board with the highest compressive strength ranging from 300kPa to 800kPa, followed by PIR rigid insulation boards (150kPa) manufactured either by Kingspan, Celotex, Xtratherm, Iko-Enertherm, Ecotherm or Recticel GP.
TIMBER FLOOR INSULATING
If your floor is above an unheated cellar or basement you will need to fit the insulation snugly between the joists and secure in place with netting if required. Solid insulation boards or rolls of mineral fibre can be fitted between the flooring joists. Plasterboard should then be fixed to the ceiling of the basement to provide fire resistance. If you have a suspended floor, with a small cavity below that is hard to access, you would normally have to take up the floorboards in order to fit the insulation. By correctly insulating suspended timber floors you can save money. As you keep more heat inside your home with floor insulation you’ll reduce the amount of energy you use whilst keeping your house snug. Where old floorboards are relayed or new ones installed, careful attention is needed to ensure that all joints between boards are adequately sealed. For more information on how to insulate timber floor click here
CONCRETE FLOOR INSULATING
If your home is newer then it is likely you have a ground floor made of concrete. You can still insulate them by laying a new layer of rigid foam insulation on top. Insulating your floor underneath the concrete slab can help regulate the temperature and prevent over-heating in rooms that are south-facing or occupied for long periods of the day due to the thermal mass of the concrete. The damp proof membrane can be placed above or below the concrete slab, depending on the particular product. If the membrane is placed above the slab an additional membrane may be required to protect the insulation from ground contaminants. In this case insulation can be added over the existing concrete slab or underneath a new one. Where insulation is placed above the slab, the rooms will warm up more quickly when the heating is switched on. High performance insulation panels or boards are often the best materials to insulate an existing concrete slab floor as they provide the best thermal performance at any given thickness. Keeping the thickness of your insulation to a minimum will reduce the likelihood of having to make costly alterations to door openings, stairs and other fixtures as a result of the increase in floor height. It is a good idea to lay a damp-proof membrane underneath the insulation. When insulating above the concrete slab, the floor finish over the insulation can be either screed or boarding. It is argued that a screed finish is more durable and can offer some thermal mass otherwise absent. Board finishes, on the other hand, can be quickly installed and provide a quicker thermal response time. To find out more on how to insulate concrete floor click here.
FLOOR INSULATING COST | UNDERFLOOR INSULATING | UK
The total floor insulation cost has two parts. The cost of materials and the cost of installation. The average cost for suspended floor insulation is £155 per m2. Floating floor insulation costs are typically one of the cheaper floor insulation options. Naturally, costs will vary depending on the size of the room and the type of floor. As far as home improvement jobs go, this one is relatively reasonable regarding pricing. Prices depend on whether you do it yourself or get the professionals in. Having a timber floor insulated professionally, including filling the gaps between the floorboards and around the skirting, depends on the size and shape of the room and the insulation material used, but typically costs around £950. The cost of insulating a concrete floor can vary greatly, especially if the concrete is removed or additional works are done, but costs will probably start around £1,450. According to the Energy Saving Trust you could save between £40-£65 per month on your energy bill through floor insulation.
TYPES OF FLOOR INSULATION
There are 6 main types of floor insulation, with different production technologies and compositions. Some boards rely more on thermal insulation values, and some more on compressive strength, but in the end they all aim to maximize the temperature reduction on the cold side. The UK floor boards come in standard sizes: 1200mm x 600mm and 2400mm x 1200mm (8'x4'). For more information on types of floor insulation click here.
EPS
EPS sheet is one of the best-known floor insulation materials because expanded polystyrene board is a easy to install and have a high insulation value. Either Jabfloor or Kay-Metzeler range of insulation boards have been manufactured specifically for use with flooring. While EPS70 polystyrene is used to insulate floors between joists, EPS 100 is recommended to use under concrete, because it is a much denser material offering 100kPA compressive strength.
PIR BOARDS
While EPS boards are budget friendly insulation boards, PIR Rigid Insulation Boards are most popular in the UK. Since the blowing agent evaporates during this reaction a rigid closed cell middle density insulation product is created. PIR boards offer compressive strength of 150kPa and are used to insulate the floor, because they come as rigid which means they are easy to cut into the shapes required. Additionally, PIR insulation boards are incredibly lightweight and relatively thin, whilst still providing high levels of insulation. There are a number of ranges of floor insulation boards available to choose from. Either Celotex, Kingspan or Xtratherm brands are the most popular polyisocyanurate boards used to insulate floors. Celotex offers TB4000, GA4000 and XR4000 PIR Boards range with compressive strength of 120kPa, followed by Xtratherm Thin-R PIR Insulation Boards with 150kPa, Kingspan offers ThermaFloor TF70 Floor Insulation Board with 140kPA compressive strength.
XPS BOARDS
Xps insulation board is specifically designed for use with underfloor heating systems on concrete & wooden floors. In fact, it is a high strength (usually 300kPa) extruded polystyrene board suitable for any floor construction including below a concrete slab, below a screed and below chipboard. It is significantly denser than other types of insulation, which gives it a greater compressive strength. Its closed cell structure also resists both moisture and water vapour ingress. Due to its compressive strength, XPS is regularly used in applications where it is going to be under some strain, such as car park decks. It’s also great for use in basements. These boards are available in 30mm, 50mm, 80mm and 100mm thickness. Among widely available insulation materials, extruded polystyrene (XPS) insulation offers one of the broadest range of compressive strengths of 300, 500 or 800kPa. It is also one of the few floor products where manufacturers invest the time to test and declare compressive creep. There are a few main manufacturers offering XPS products. While Soprema offers an SL version with compressive strength of 300kPa, Kingspan with its Greenguard GG offers either 300kPa, 500kPa or 700kPa. On other hand Polyfoam offers square edged xps standard board that has a middle class compressive strength of 200kPa.
PHENOLIC BOARDS
Phenolic board is a top shelf panel that can be used to insulate floors in both new build and refurbishment of residential, commercial and industrial buildings. As a part of Kooltherm range, Kingspan K103 Floorboard offers fibre-free rigid thermoset phenolic core with thermal conductivity of just 0.018 W/mK across all thicknesses. In fact, K103 is a premium product in terms of floor insulation. Product has been developed by Kingspan as a premium floor insulation board, providing high performing insulation with a thinner material than was possible before. K103 Kooltherm can be used on both solid concrete and suspending floors. Kingspan is followed by Unilin brand with SR/UF Safe-R Phenolic Floor Insulation Board. Unilin phenolic board offers thermal conductivity of 0.020W/mK and compressive strength of 150 (kPa).
UNDER CONCRETE INSULATION
Cordek® company have created a wide range of Cellcore HX Plus void formers with an extra added insulation. This two in one solution is designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave with the additional Filcor EPS100 insulation layer protected by a ultra thin polypropylene sheet on top. HX Plus under slab is a combination product. In fact, it has a range of cellular legs with different depths of insulation glued onto the top of those cellular legs dependent upon the target U-value that you need to hit. It incorporates an integral layer of EPS insulation available in various thicknesses to meet thermal performance requirements.HX Plus is made in 25mm increments, which means insulation material ( Filcor) is added.
MINERAL WOOL
In terms of floor insulation, Rockwool and Knauf are the most recognised brands in the UK due to the fact they can be installed through simple friction fitting. Mineral wool is an insulating material made of natural raw materials. The raw materials from which mineral wool is produced are non-flammable. Due to the mechanical effect of fibres, Mineral wool is an excellent insulating material because there is "trapped" air between the basalt or glass fibers. The fibrous structure of wool causes the sound waves passing through it to be scattered and suppressed. The higher density (heavier) product is used as higher mechanical insulation parameters are required. Rockwool Acoustic insulation RWA45 is a particular favourite with customers, providing thermal insulation and fireproofing on top of its acoustic dampening credentials. On other hand Rockwool with its HARDROCK® Multi-Fix (DD) offers an outstanding density of 160kg/m3 .
We offer a wide variety of floor insulation (maybe not as much as in B&Q), but we keep most common insulation thickensses like: 50mm, 80mm, 100mm, 150mm, 200mm,
Video credit:https://www.youtube.com/watch?v=1hDW6b3mT5w&t=10s
25mm Unilin XT/UF Thin-R Floor Insulation Board is a polyisocyanurate rigid foam insulation board used in floor construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0...
25mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
25mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
25mm Unilin XT/PR Thin-R Insulation Board is a polyisocyanurate rigid foam insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
XT/PR PIR Board is a high performance foil faced insulation foam board with a certified thermal conductivity of 0.022..
25mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
25mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
25mm Wall Insulation Board Unilin Thin-R XT/TF is a rigid foam insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conducti..
Fillcrete Expansion Joint Strip 25mm x 200mm x 2440mm is a light brown, wood based expansion joint strip used for concrete expansion and as a movement joint filler to reduce the risk of cracking, packed in 5 strips per pack.
Fillaboard Expansion Joint Strips are used in expansion joints for concr..
25mm x 200mm x 2440mm Expansion Joint Strip Fillaboard Fillcrete
General purpose expansion joint filler strip used for concrete expansion
Highly resistant to moisture penetration and ice formation in joints
Impregnated fibreboard strip with a minimum 10% bitumen content
Required to relieve stress and reduce the risk of cracking in a concrete
25mm Xtratherm Thin-R is a rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for all types of small and large projects.
Thin-R Rigid Insulation Board (2400mm x 1200mm x 25mm) is a multi-application product designed for roofs, walls, floors, timber and steel framed sy..
25mm Wood Fibre Fillerboard is an ultimate bitumen impregnated wood fibre based filler board with 230kg density/m3 used as an expansion joint filler for concrete slab and wall construction to reduce the risk of cracking.
Wood Fibre Filler Board Sheet is a 25mm thick, 2133mm long by 1210mm wide fi..
Fillerboard 25mm Expansion Joint Strip (200mm x 2440mm) is an universal bituminous wood fibre based joint strip used as an expansion joint filler for concrete slab and wall construction to reduce the risk of cracking.
25mm x 200mm x 2440mm Fillerboard Jointing Strips packed in 5 strips per pack a..
25x200x2440mm Fillerboard Expansion Joint Strip Euro Accessories
2mm Isocheck Internal Packer (Timber Batten Support) is designed for an acoustic cradles system, a levelling system for uneven or cambered concrete floors used to reduce sound transmission.
Isocheck Cradle System is New Build Robust Detail compliant for masonry floor construction and where the st..
2mm Internal Packers for Isocheck Acoustic Cradles (pack of 500 packers)
Used as a part of suspended acoustic cradle system (timber batten support)
Designed for an acoustic cradles system, a levelling system for floors
Meet the sound transmission standards of Approved Document E 2003
New Build Robust Detail descriptive FFT2 (E-FC-1, E-FS-1, E-FC-2 and E-FC-7)
30mm Isocheck PRIMO 30 Acoustic Flooring System is designed to reduce sound transmission through traditional, composite timber and steel joisted floors within new build and light weight frame constructions.
Acoustic Overlay Floorboard 2400mm x 600mm x 30mm Isocheck PRIMO 30 consists of a 8mm laye..
30mm Isocheck PRIMO 30 Acoustic Overlay Board (Flooring System)
Designed to reduce sound transmission over existing floorboards
PRIMO 30 is used for traditional timber joisted and steel joisted floors
Acoustic Overlay Board 2400mm x 600mm x 30mm - PRIMO 30
8mm APF bonded to 22mm P5 V313 Moisture Resistant Chipboard
30mm Kingspan ThermaPitch TP10 Insulation Pitched Warm Roof Board is a polyisocyanurate (PIR) fibre-free rigid thermoset foam insulation board used for under rafter or between and over joist applications.
Thermapitch TP10 Kingspan PIR 2400mm x 1200mm x 30mm board is a high performance insulation ..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES
Monodeck 30T Floor Board is an acoustic overlay floor insulation system used directly to floorboards to reduce transmission through timber floors in situations where finished floor height is critical.
Isomass Monodeck 30T floor board is a 30mm thick acoustic insulation consisting of a layer of 8m..
30mm Thermafloor TF70 PIR Insulation is a polyisocyanurate (PIR) fibre-free rigid insulation board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
Thermafloor TF70 Kingspan PIR 2400mm x 1200mm x 30mm is suitable for use below the screed, in bl..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS
Kingspan Thermawall TW55 PIR Rigid Fibre-Free Insulation Board 30mm is used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Thermawall TW55 Kingspan PIR 2400mm x 1200mm x 30mm is a high performance insulation board suitable for use with timber ..
31mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one so..
31mm Unilin FR/TP Flat Roof Insulation Decking is a 25mm PIR rigid foam insulation core and 6mm Plywood composite insulated decking board used for new and refurbishment flat roof applications.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight foil fac..
31mm Unilin FR/TP Warm Roof PIR Ply Insulation Board Decking
Used for new build and refurbishment flat roof applications
Creates a continuous Vapour Control Layer (Vapour Barrier)
PIR foam insulation core and 6mm plywood insulated decking
Unilin FR/TP Thermal ply flat roof insulation over joists board
34mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
35mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 24..
40mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 40mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
40mm EPS 70 Expanded Polystyrene Kay-Metzeler Kay-Cel Flooring Insulation Board is a universal cost-effective, long lasting, thermally efficient and completely CFC and HCFC free standard eps insulation board suitable for multiple applications primarily used in residential buildings.
Kay-Metzeler ..
8ft by 4ft sheets (8' x 4')
Compressive Strength: <70kPa
Suitable above a concrete slab or a precast concrete
EPS70 is rot proof - unaffected by bacteria moulds or fungi
EPS70 is Moisture resistant - non irritant and odourless non-toxic
40mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 40mm aluminium fo..
40mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 40mm foil backed slab pr..
40mm Foil Faced on Both Sides Rocksilk RS100 Knauf Fire Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil faced two sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm x 40mm a..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame Non-combustible
Provides excellent fire, thermal and acoustic performance.
40mm Knauf RS45 Black Foil Backed Two Sides Slab is an insulation solution specially designed for concrete soffits, an A1 class non-combustible rock mineral wool slab.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new build an..
40mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
40mm Knauf Rocksilk RS45 Black Foil Backed Slab is an insulation solution specially designed for concrete soffits, an A1 class non-combustible rock mineral wool insulation slab.
Knauf RS45 1200mm x 600mm x 40mm black foil backed slab provides outstanding fire, thermal and acoustic performance for..
40mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
40mm Recticel Eurothane General Purpose Insulation Board is an easy to cut and fit PIR rigid insulation board faced with a gas diffusion tight multilayer foil on both sides that is suitable for pitched roof, timber and steel framed walls, ceilings and floor applications.
Recticel Eurothane GP 240..
40mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) non-combustible rock mineral wool unfaced rigid slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
40mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material designed for use in multiple applications..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
40mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust, medium-density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Insulation in cei..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
40mm Rockwool RWA45 Acoustic Insulation Slab (Prorox SL920) is a non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using RWA45 Rockwool Insulation in ceilings, walls and flo..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
40mm XO/UF Underfloor Heating PIR Insulation Board Xtratherm Xtroliner is an improved performance polyisocyanurate rigid foam floor insulation board with robust textured foil facings designed for ground supported floors, suspended floors and underfloor heating.
Xtratherm Xtroliner XO/UF is a BBA ..
Suitable for Underfloor Heating - UFH
High Compressive Strength >150 (kPa)
Premium PIR Insulation - Thermal Conductivity: 0.021W/mK
50mm Black Foil Faced RS60 Knauf Slab is an aluminium black foil faced to one side insulation slab with an excellent class A1 fire performance used for concrete soffits.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that..
50mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
50mm Black Foil Faced x2 Sides RS60 Knauf is a fire non-combustible insulation slab faced with a composite black foil on two sides providing an excellent class A1 fire performance.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy special..
50mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
50mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm foil slab provides outstandi..
50mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm x 50mm aluminium foil insu..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
50mm Kingspan GreenGuard GG300 XPS Insulation is a high performance XPS board formerly known as Kingspan Styrofoam, can be used for specialist applications where the high compressive strength (stress) is required.
GreenGuard GG300 XPS Sheets 50mm x 600mm x 1250mm are resistant to the passage of w..
50mm Kingspan GreenGuard GG300 R
Rigid XPS Insulation Kingspan Styrozone
Fibre-free rigid extruded polystyrene XPS
Insulation board with high compressive strength (stress)
Basements, car parks, inverted roofs and cold store flooring
50mm IKO Enertherm ALU PIR Insulation Board is a multi-functional insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gas-tight aluminium construction.
IKO PIR Insulation Board 50mm can be used on flat roofs, pitch roofs, loft floors, cavity walls, clad..
50mm RS140 Knauf Rocksilk is a non-combustible rock mineral wool insulation slab with the best possible Euroclass A1 reaction to fire classification used in multiple thermal and acoustic applications.
RS140 Rocksilk is manufactured with a density of 140kg/m3, designed for use in a variety of appl..
50mm x 600mm x 1200mm Knauf Rocksilk RS140 (140kg/m3)
Class A1 Non-combustible Rigid Rock Mineral Wool Insulation Slab
Fire, thermal and acoustic insulation slab used for building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceiling, timber & steel frame
50mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
50mm Novia Double-Sided Butyl Tape is a high-quality sealing tape designed for Gas Barrier and Vapour Control Layer (VCL) installations.
This 10m long polyisobutylene based tape is economical and non-toxic solution.
Butyl tape is easy to install, tools are not required for application.
For ..
Vital for airtight installations
Very good adhesion properties
for Gas Barrier installations
for Vapour Control Layer installation
Use in conjunction with Novia Metallised BOPP tape
50mm Rockwool RW5 Insulation Slab (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant acoustic insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using Rockwool RW5 Insulation in ..
RW5 is rated Euroclass A1 non-combustible
Excellent thermal, Acoustic (100kg density) and fire performance
50mm Xtratherm Safe-R SR/UF Floor Insulation Board is a top-class rigid phenolic foam insulation board with a low emissivity aluminium foil facings designed for ground supported floors, suspended floors and underfloor heating (UFH).
Xtratherm SR/UF range is a BBA certified high-efficiency thermal..
50mm Terrawool TW50 Sound Insulation Slab is a standard density (50kg/m3) non-combustible thermal and acoustic stone wool insulation slab used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab is a high-performance recyclable and dur..
50mm Xtratherm XPS 300 is a rigid extruded polystyrene (XPS) foam insulation board providing a durable thermal solution to technically demanding applications where high compressive loading of 300kPa is a requirement.
Extruded Polystyrene XPS 300 is an ideal solution for use in commercial, industr..
50mm Extruded Polystyrene Xtratherm XPS 300 kPa
For use in commercial, industrial and cold storage areas
Closed-cell structure, which prevents moisture-absorption
Very low lambda values and compressive loading capabilities
Xtratherm XPS Sheets are 1250mm long by 600mm wide boards
5mm x 75mm Isocheck Isolation Strip is an acoustic self adhesive isolation strip used for joists and studs to increase impact sound insulation, a cross linked Isopoli foam strip with a self adhesive layer backing.
Isolation Strip is used for upgrades when looking to increase impact sound insulati..
5mm x 75mm Isocheck Acoustic Isolation Strip for Joists and Studs
Made from a cross linked Isopoli foam and a self adhesive layer backing
Increase impact sound insulation and reduce structure-borne noise
Self Adhesive Isolation Strip for easy application to the studs or joists
Noise reduction system used for partition/separating walls and floors
60mm URSA Terra Acoustic Partition Roll APR is a glass mineral wool sound insulation roll, offering sound absorption and noise reduction in timber or metal framed internal partition walls, separating walls and floors.
Acoustic Partition Roll 60mm is a cost effective way of insulating both new and..
65mm Celotex GA4000 PIR Insulation Board (GA4065) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for wall, floor, ceiling and roof cut-to-fit applications.
Celotex Insulation Board is an excellent h..
6mm Isocheck Re-Mat Base 6 is an under screed acoustic underlay roll specially designed to reduce impact sound transmission through all types of structural concrete floors.
Under Screed System Isocheck Re-Mat Base 6 is suitable for all types of concrete floors in new build, refurbishment and conv..
6mm Isocheck Re-Mat Base 6 Acoustic Under Screed Underlay (12.5m2 roll)
Reduce impact sound transmission through all types of structural concrete floors
For all types of concrete floors in new build, refurbishment and conversion projects
Complies with the latest version of Approved Document E of the Building Regulations
Rubber layer to be placed within a masonry structural floor directly below the screed
70mm Knauf Rocksilk Flexible Insulation Slab is a thermal and acoustic multi-purpose rock mineral wool insulation slab which can be used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Knauf Flexible is non..
75mm Expanded Polystyrene EPS70 Jablite Jabfloor Insulation Board is an economical, long lasting, thermally efficient, easy to cut and install universal EPS insulation board suitable for insulating floors, walls and roofs.
Expanded Polystyrene EPS 70 75mm is an excellent permanent insulating mate..
8ft by 4ft sheets (8' x 4')
Compressive Strength: <70kPa
Suitable above a concrete slab or a precast concrete
EPS70 is rot proof - unaffected by bacteria moulds or fungi
EPS70 is Moisture resistant - non irritant and odourless non-toxic
75mm Rockwool RW6 Foil Faced x2 Sides Slab is an insulation suitable for a wide range of applications, an A1 class non-combustible insulation slab with an excellent fire, thermal and acoustic properties.
Foil Faced Two Sides (FFx2) Rockwool RW6 75x600x1200mm fire performance integrity is 240 minu..
75mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
75mm Isocheck Deep Batten 75RD is a suspended floor system specially designed for timber and steel frame floors and can be used in conjunction with underfloor heating systems.
Deep Batten System is designed to be used over timber floors with a timber frame or masonry facade (to hide services or a..
75mm x 45mm x 1800mm Isocheck Deep Batten 75RD UFH System
Suspended floor system specially designed for timber and steel floors
Can be used in conjunction with underfloor heating (UFH) systems
Suitable for conversions, refurbishments or new build projects
Sound transmission and New Build Robust Detail descriptive FFT1
75mm APR Knauf Earthwool Acoustic Insulation Roll is a non-combustible glass mineral wool acoustic insulation roll which offers high level of sound absorption and noise reduction in internal wall, partitions and floor applications.
Sound Insulation Roll 75mm is manufactured using Knauf ECOSE Tech..
75mm Expanded Polystyrene EPS70 Stylite Insulation Board is an easy to install thermally efficient standard EPS insulation board suitable for multiple applications primarily used in residential buildings.
Stylite SPI Expanded Polystyrene Insulation Board is suitable above a concrete slab or a pre..
75mm SR/UF Unilin Safe-R Floor Insulation Board is an ultimate phenolic rigid foam floorboard used in underfloor heating, below concrete slab, suspended timber floors and below floor screed.
SR/UF provides the most efficient means of floor insulation as it has the strength and thermal properties ..
75mm Unilin XO/UF Floorboard is a superior performance PIR rigid insulation faced with an embossed aluminum facings used for underfloor heating, solid and suspended floors applications.
Unilin XO/UF is lightweight, easy to install and combines high compressive strength with low thermal conductivi..
75mm Rockwool RW6 is a versatile slab suitable for a wide range of building applications, an A1 non-combustible resin bonded insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Slab is manufactured in 140kg density per cubic meter (140kg/m3), specially designed for us..
75mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
Sundolitt® XPS300 (300kPa) Insulation Board 75mm is an extremely durable rigid thermal insulation board made of extruded polystyrene used in high moisture environments such as inverted roofs, flat or zero pitch roofs and green roofs systems.
XPS 300 Sundolitt® is a lightweight, easy to cut extrud..
75mm Rockwool RW6 Foil Faced 1 Side is an insulation slab suitable for a wide range of building applications, an A1 non-combustible insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Foil Faced x1 Side Slab 75x600x1200mm fire performance integrity is 240 minutes, and..
75x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
7mm x 450mm x 2500mm Polypropylene Beam Form Sheet is used for constructing on site concrete ground beams and pile caps, a smart solution that requires less excavation than other formwork methods.
Polypropylene Beam Form Sheet is lightweight and can be shaped by scoring and bending to form any gr..
7mm Polypropylene Beam Form Sheet - 2500mm x 450mm Boards
Groundform Sheet Permanent Shuttering, Beamform, Shuttering Systems
Using Beam Form requires less excavation than other formwork methods
Effective method of constructing on site concrete ground beams and pile caps
Can be shaped by scoring and bending to form any ground beams on the pile cap profile
80mm Kingspan GreenGuard GG500 XPS Sheet (Kingspan Styrofoam) is a high compressive strength 500kPa, closed cell extruded polystyrene rigid insulation board used mainly as a high performance insulation for basements, car parks, inverted roofs and heavy-duty commercial, industrial and cold store floo..
80mm Kingspan GreenGuard GG500 500kPa
Rigid XPS Insulation Kingspan Styrozone Styrofoam
Fibre-free rigid extruded polystyrene XPS Sheets
Insulation board with high compressive strength (stress)
Basements, car parks, inverted roofs and cold store flooring
80mm Soprema XPS 300 SL is a high quality, waterproof and strong rigid extruded polystyrene insulation board used as a durable thermal solution to technically demanding applications where high compressive loading (300kPa) is a requirement.
XPS SL 300 1250mm x 600mm x 80mm is designed for use in c..
85mm Cordek Cellcore HX B Under Beam EPS Board 13/18 is used beneath reinforced concrete ground beams and pile caps to provide protection against the potential effects of ground heave.
Cellcore HX B Grade 13/18 is calculated and calibrated for concrete thickness up to 460mm (has been tested to a..
85mm x 500mm x 500mm Cordek Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against uplift..
85x600x2400mm HX B Under Beam Grade 13-18 is used beneath reinforced concrete ground beams and pile caps, an unique hollow construction polystyrene block with moulded legs.
Cellcore HX B Grade 13-18 is fully tested, calculated and calibrated for concrete thickness up to 460mm to protect ground be..
85mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 13-18 for concrete thickness up to 460mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
90mm Cordek Cellcore HX S Under Slab Anti Heave Board (Grade 13/18) is used beneath reinforced concrete floor slabs to protect foundations against the potential effects of ground heave.
Anti Heave Board HX S Grade 13/18 is calculated and calibrated for concrete thickness up to 460mm (has been tes..
9mm Screedcheck XL9 Impact Improvement System, comprises a closed cell isopoli, cross linked polyethylene foam layer specially designed to be placed within a masonry structural floor directly below the screed.
Isocheck Screedcheck XL9 System from Isomass features a 9mm closed cell cross linked fo..
9mm Isocheck Screedcheck XL9 Impact Noise Improvement 60m2 Roll
Code 5 X-Ray Lead Lined Plywood Sheet is a 1200x1200mm lead lining plywood sheet covered with a thin layer of lead used in the healthcare industry to provide complete radiation (x-rays) protection and safety to walls, ceilings and floors.
X-Ray Resistant Plywood Panel Code 5 consisting of 12mm pl..
Code 5 Lead Lined Plywood X-ray Radiation Protection
Strong plywood sheet covered with a thin layer of lead
Used to provide complete X-rays protection and safety
1200mm x 1200mm - 1.44m2 (4′ x 4′) durable lead lining sheets
Dental Surgery, Veterinary Practice, Hospital, X-ray and Diagnostic rooms
Novia 1200 Gauge VCL Full DIY KIT is a complete set of materials and fittings required for Novia 1200G Polythene Vapour Control Layer installation.
DIY KIT contains: Novia 1200G VCL, 310mm Sealant Cartridge, Aluminium foil tape and 2 rolls of Novia Double-sided butyl tape.
All fittings needed ..
Cordek Filcor 45 EPS is a lightweight structural fill material used as a void former for forming openings and voids within concrete structures in hard and soft landscaping, swimming pools, steps, ramps and shapes.
Cordek Filcor Grade 45 is calculated and calibrated for concrete thickness up to 18..
Swimming Pools, Podium Slabs
Hard and Soft Landscaping, Steps, Ramps and Shapes
CT1 Silicone Sealant & Adhesive CLEAR (Transparent) 290ml is a highly flexible hybrid polymer based silicone sealant and adhesive that can be used to seal: solid wall insulation, render-only systems, baths, showers, roofs, doors, windows, and gutters.
Clear (transparent) colour silicone sealant a..
CT1 Silicone Sealant and Adhesive - Clear (Transparent)
Danopren XPS TR60 (Styrofoam) Insulation Board 60mm is a robust extruded polystyrene foam board with ship-lap edges used as a thermal insulation board for flat roofs, inverted roofs, floors with overloads, for residential and commercial applications.
60mm XPS Insulation Danopren is an easy and sa..
Stixall Extreme Power Silicone Sealant – Colour Black (290ml) is an ultimate combined high-grab building adhesive and sealant offering a high strength adhesion and gap-filling capabilities that can be applied to a wide range of substrates.
Everbuild Stixall is a one part, chemically curing sealan..
Everbuild Stixall Extreme Power BLACK
High-grab building adhesive and sealant 290ml
High strength adhesion and gap-filling capabilities
Fillerboard Joint Strip 20mm x 200mm x 2440mm is an expansion joint filler strip, a multi purpose bituminous wood fibre based strip used as an expansion joint filler for concrete slab and wall construction.
20x200mm Fillerboard Jointing Strips packed in 6 strips per pack are highly resistant to m..
20x200x2440mm Fillerboard Expansion Joint Strip Euro Accessories
Expansion Joint Strip 12mm x 200mm x 2440mm Fillcrete is a specially formulated impregnated fibreboard strip with a minimum 10% bitumen content used for concrete expansion and movement joints, packed in 10 strips per pack.
Fillcrete Expansion Joint Strips are used in expansion joints for concrete..
12mm x 200mm x 2440mm Expansion Joint Strip Fillaboard Fillcrete
General purpose expansion joint filler strip used for concrete expansion
Highly resistant to moisture penetration and ice formation in joints
Impregnated fibreboard strip with a minimum 10% bitumen content
Required to relieve stress and reduce the risk of cracking in a concrete
Isocheck Isoblock 28mm x 35mm x 138mm is an ultimate acoustic isolating system clip used with Isobar resilient channel to provide superior noise control for ceilings, floors and walls.
Isomass Isocheck Isobar and Isoblock is a sound reduction system designed to offer a more robust alternative to ..
Isocheck Isoblock (28mm deep x 35mm wide x 138mm long)
Isocheck Isoblock Clip designed for ceilings, floors and walls
Used to provide superior noise control (sound reduction system)
Vibration absorbing clip which is secured to studs and joists
Isolation solution to construct separating and partition walls and ceilings
The 50mm Kingspan Kooltherm K103 Floor Insulation Board is an unbeatable floor solution with no equivalent to K103 superior thermal performance designed for suspended floors, ground supported floors and underfloor heating systems.
Kingspan Kooltherm K103 50mm x 1200mm x 2400mm Flooring Board is a..
50mm Kingspan Kooltherm K103 (previously K3)
Phenolic insulation thermal conductivity of 0.019W/mK
Easy to handle and install non-deleterious material
Lead Lined Plywood Code 5 (X-Ray Protection Panel) is a lead lining plywood sheet covered with a thin layer of lead used in the healthcare industry to provide complete radiation (x-rays) protection and safety to walls, ceilings and floors.
Code 5 X-Ray Resistant Plywood Panel consisting of 12mm p..
Code 5 Lead Lined Plywood X-ray Radiation Protection
Strong plywood sheet covered with a thin layer of lead
Used to provide complete X-rays protection and safety
Standard 2400mm x 1200mm (4′ x 8′) durable lead lining sheets
Dental Surgery, Veterinary Practice, Hospital, X-ray and Diagnostic rooms
5.5mm Low-E EZY Seal Original Reflective Foil Insulation (30m2 roll) is a pure aluminium thermal insulation and air infiltration vapour barrier designed to reduce draughts and uncontrolled air movement and increase thermal performance by blocking up to 97% of radiant heat.
With one of the lowest ..
5.5mm Low-E EZY Seal Reflective Foil Insulation
Moisture control and Wind infiltration barrier
Low-E EZY Seal - Class A, Class 1 Fire Rating
Totally non-toxic and with no fibres and no itching
Thinnest most effective reflective foil insulation
Low-E PERF Perforated Breathable Reflective Foil Insulation 30m2 is a superior 5.5mm thick certified insulation that allows moisture to pass through the perforated reflective foil while limiting air movement, suitable for use on the external sides of an insulation system in wall, floor, and roofing ..
Low-E PERF Perforated Breathable Reflective Foil
Superior 5.5mm thick certified ultrathin insulation
Class A, Class 1 Fire Rating - Low-E PERF 30m2
Low-E PERF reflects 97% of radiant heat
Suitable for wall, floor, and roofing applications
Novia 1200G Air-leak Barrier and Vapour Control Layer AVCL is the highest grade single-ply, non-laminated, virgin-grade blown polythene 300 micron, 1200 gauge material that is suitable for use in residential timber frame applications.
Finest specification of CE approved virgin grade polythene va..
Air-leak barrier and vapour control layer (AVCL)
Complies with BS EN 13984 - multi-folded in 4 x 25 m
Expanded Polystyrene EPS70 Insulation Board 40mm is a lightweight closed cell foam insulation board suitable for a wide range of building insulation applications, primarily used in residential buildings.
40x1200x2400mm EPS Insulation Board is used above a concrete slab or a precast concrete floo..
80mm XPS Thermal Insulation Sheet Soprema is a high-performance extruded polystyrene insulation foam board used as a durable thermal solution to technically demanding applications where high compressive loading (300kPa) is required.
Soprema XPS Thermal Insulation Board is an industry-leading rang..
STYRODUR 3000 CS XPS Extruded Polystyrene Sheet is a 50mm thick multipurpose thermal insulation board made of extruded polystyrene with smooth surfaces and shiplap edges for almost all applications in structural and civil engineering.
50mm Styrodur® XPS comes in 1265mm long by 615mm wide sheets a..
100mm Rockwool RW6 (140kg) is suitable for a wide range of general building applications, a rigid class A1 resin bonded stone wool insulation slab with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Slab is manufactured in 140kg density per cubic meter (140kg/m3), specially desi..
100mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
100mm Expanded Polystyrene EPS70 Jablite Jabfloor Insulation Board is an economical, long lasting, thermally efficient, easy to cut and install universal EPS insulation board suitable for insulating floors, walls and roofs.
Expanded Polystyrene EPS 70 100mm is an excellent permanent insulating ma..
8ft by 4ft sheets (8' x 4')
Compressive Strength: <70kPa
Suitable above a concrete slab or a precast concrete
EPS70 is rot proof - unaffected by bacteria moulds or fungi
EPS70 is Moisture resistant - non irritant and odourless non-toxic
100mm Knauf Earthwool Acoustic Insulation Roll is a glass mineral wool acoustic insulation roll which offers high level of sound absorption and noise reduction in internal wall, partitions and floor applications.
Knauf APR Sound Insulation is a non-combustible acoustic roll manufactured using ECO..
100mm EPS70 Expanded Polystyrene Insulation Sheet Stylite is a cost-effective, easy to install standard EPS insulation board that is suitable for multiple applications primarily used in residential buildings.
Stylite SPI Expanded Polystyrene Insulation Board 100mm is suitable above a concrete sl..
100mm Foil Backed on Both Sides Rockwool RW6 is a foil faced on 2 sides insulation used where fire rating is crucial, an A1 rigid insulation slab with an excellent fire, thermal and acoustic properties.
Foil Faced Two Sides (FFx2) Rockwool RW6 100x600x1200mm fire performance integrity is 240 minu..
100mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
Foil Backed Rockwool RW6 is a 100mm thick foil faced on one side insulation slab used where fire rating is crucial, a rigid class A1 insulation with an excellent fire, thermal and acoustic properties.
Rockwool RW6 Foil Faced x1 Side Slab 100x600x1200mm fire performance integrity is 240 minutes, a..
100x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
100mm Soprema XPS 300 SL is a high quality, waterproof and strong rigid extruded polystyrene insulation board used as a durable thermal solution to technically demanding applications where high compressive loading (300kPa) is a requirement.
XPS SL 300 1250mm x 600mm x 100mm is designed for use in..
10mm Isocheck Re-Mat Base 10 is an acoustic under screed underlay roll specially designed to reduce impact sound transmission through all types of structural concrete floors.
Under Screed System Isocheck Re-Mat Base 10 is suitable for all types of concrete floors in new build, refurbishment and c..
10mm Isocheck Re-Mat Base 10 Acoustic Under Screed Underlay (7.5m2 roll)
Reduce impact sound transmission through all types of structural concrete floors
For all types of concrete floors in new build, refurbishment and conversion projects
Complies with the latest version of Approved Document E of the Building Regulations
Rubber layer to be placed within a masonry structural floor directly below the screed
Self Adhesive Isocheck Acoustic Isolation Strip 10m roll is a 10mm thick, 100mm wide isolation strip made from a cross linked Isopoli foam used for the reduction of structure-borne and foot fall noise.
Isolation Strip is used for upgrades when looking to increase impact sound insulation from foot..
10x100mm Isocheck Acoustic Isolation Strip Self Adhesive 10m Roll
Made from a cross linked Isopoli foam and a self adhesive layer backing
Increase impact sound insulation and reduce structure-borne noise
Self Adhesive Isolation Strip for easy application to the studs or joists
Noise reduction system used for partition/separating walls and floors
General Purpose Expansion Joint Filler Strip Fillaboard Fillcrete 12mm x 225mm x 2440mm is an ideal solution for use in expansion joints for concrete to reduce the risk of cracking, packed in 10 jointing strips per pack.
Fillcrete Expansion Joint Strips are used in expansion joints for concrete i..
12mm x 225mm x 2440mm Expansion Joint Strip Fillaboard Fillcrete
General purpose expansion joint filler strip used for concrete expansion
Highly resistant to moisture penetration and ice formation in joints
Impregnated fibreboard strip with a minimum 10% bitumen content
Required to relieve stress and reduce the risk of cracking in a concrete
135mm Cordek Cellvent HX Grade 18/24, an EPS void former used beneath reinforced concrete floor slabs to provide a combined ground heave protection and passive gas venting system.
Cellvent HX is available in a range of specifications and can be used in conjunction with gas membranes, vent outlets..
135mm Cordek Cellcore Cellvent HX Cellular EPS Void Former
Cellvent HX Grade 18/24 Maximum Concrete Depth 660mm
Reinforced ground floor slabs where subsidence is not expected
Used to alleviate the effects of ground heave and gas venting
Combined ground heave protection and passive gas venting system
140mm Celotex XR4000 PIR Insulation Board (XR4140) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for floor, wall, roof and ceiling cut-to-fit applications.
Celotex Insulation Board is an excellent ..
140mm Hyfloor XT/HYF Xtratherm Thin-R PLUS is a high performance PIR rigid tongue and grooved floor insulation board with a certified thermal conductivity (lambda value) of 0.021 W/mK which is suitable for use with underfloor heating.
Xtratherm Thin-R PLUS HYFLOOR XT/HYF 140mm has high compressiv..
140mm Xtratherm Thin-R PLUS XT/HYF Hyfloor Insulation Board
Enhanced performance PIR tongue and grooved floor insulation
PIR rigid foam core with low emissivity gas tight foil facings
Used for underfloor heating systems, solid and suspended floors
The 150mm Claymaster is an expanded polystyrene (EPS) compressible-fill lightweight material used to protect foundations against lateral heave, typically on the inside face of piled ground beams or deep trench fill foundations.
Shrinkable clays are soils containing a large proportion of mineral p..
150mm Jablite Claymaster Expanded Polystyrene Board (8' x 4')
Compressible-fill EPS used to protect foundations against lateral heave
Used on inside face of piled ground beams or deep trench fill foundations
150mm Floor Insulation Board Unilin XT/HYF, consisting of a rigid polyisocyanurate core between low emissivity gas tight facings used for underfloor heating applications.
Unilin Hyfloor XT/HYF has a superior thickness to performance ratio, allowing the lower targets required under Building Regula..
150mm Unilin XT/HYF HYFLOOR Thin-R Plus Floorboard Premium PIR
For use with underfloor heating, ground supported and suspended floors
Excellent lambda value (Thermal conductivity) of 0.021 W/mK
Unilin XT/HYF Meets U-Values specified in the Building Regulations
Improving the overall U-Value of the floor (XT/HYF HYFLOOR)
150x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF is a 150mm thick engineered floor insulation system used to achieve Future Homes Standard and passive floor performance.
The Hyfloor Strip Foundation System provides effective insulation that has been detailed and installed professional..
150x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF
Engineered floor insulation with high performance foundation riser panels
Used to achieve Future Homes Standard and passive floor performance
Hyfloor System that provides thermal performance and robust detailing
Suitable for use with built-in full fill and partial fill wall insulation
Cordek Cellcore HX B Under Beam 18/24 is a 155mm thick polystyrene board used beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
HX B (Concrete Ground Beams Protection Block) Grade 18/24 is calculated and calibrated for concrete thick..
155x600x600mm Cordek Heaveguard Pile Collars are compressible low density Expanded Polystyrene products, used when foundations need to be protected against ground heave.
The Heaveguard (Claymaster) pile collar is an engineered material in green or pink color designed to safeguard piles against up..
15mm Supalux Class A1 Fire Rated is an original fire protection board Class A1 with up to 240 minutes fire rating and improved moisture resistance that can be used in steel and timber frame, mezzanine floors, shaft-wall and doors installations.
PROMAT SUPALUX 15mm is a strong off-white in colour ..
160mm Cordek Cellcore HX S Under Slab 18/24 is a lightweight expanded polystyrene (EPS) block designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave by reducing the upward force transmitted to the structure from ground heave.
Grade 18/24 ..
A2 Versapanel Cement Bonded Particle Board 16mm is a versatile class 0 building board offering exceptional strength, mechanical and acoustic performance compared with other exterior gypsum sheathing boards.
16mm Versapanel is a robust building board that can be used in a wide range of residential..
16mm Cement Bonded Particle Board CBPB
Versapanel A2, Class 0 Sheathing Building Board
Can be used in external and internal applications
Versatile Versapanel for residential and public applications
Exceptional strength, mechanical and acoustic performance
200mm Cordek Heaveguard Foundations Protection Against Ground Heave is a lightweight, compressible-fill expanded polystyrene (EPS) material designed to protect foundations against effects of ground heave, typically on the inside face of piled ground beams or deep trench fill foundations.
Heavegua..
Clay Heave Protection EPS Board
Ground Heave Protection Solution for Clay
Soil heave potential: Medium
BBA Agrement Certificate No. 17/5448
Low density compressible expanded polystyrene (EPS)
Cordek Cellcore HX B Under Beam 18/24 is a 220mm thick lightweight EPS (expanded polystyrene) block designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave.
HX B (Concrete Ground Beams Protection) Grade 18/24 is calculated ..
Cellcore HX B Under Beam 220x600x2400mm 18-24 is specially designed for reinforced concrete ground beams and pile caps, an EPS with hollow core and moulded legs.
Cordek Cellcore HX B Grade 18-24 is calculated and calibrated for concrete thickness up to 660mm to protect ground beams against the ef..
220mm thick Cellcore Under Beam HX B Board cut to 600mm widths
HX B Ground Beams Grade 18-24 max. concrete depth up to 660mm
Protects ground beams against the potential effects of ground heave
Used beneath reinforced concrete ground beams and pile caps
Special hollow construction expanded polystyrene (EPS) block
225mm Anti Heave Board Cordek Cellcore HX S Under Slab 18/24 is used beneath reinforced concrete floor slabs to protect against the effects of ground heave by reducing the upward force transmitted to the structure.
The HX S EPS Grade 18/24 is calculated and calibrated for concrete thickness up to..
25mm Acoustic Partition Insulation Roll APR Superglass Multi-Acoustic is a flexible unfaced glass mineral wool insulation roll used in internal partition walls, framed separating walls and timber separating floors.
Superglass APR Rolls are deemed non-combustible and have a fire classification of..
27mm Isocheck 27C is used over concrete floors for new build, refurbishment and conversion projects, an acoustic overlay platform system designed to reduce impact sound transmission through concrete floors.
Acoustic Overlay Isocheck 27C system does not need the additional protection of a moisture..
27mm Isocheck 27C Acoustic Overlay Platform System (Floorboard)
Acoustic overlay floor system specially designed for concrete floors
27C is suitable for new build projects, refurbishments and conversions
Meet the sound transmission standards of Approved Document E 2003
May also be installed in conjunction with underfloor heating systems
28mm Isocheck 28T Acoustic Overlay Board, a high performance system specially designed to reduce sound transmission through traditional joisted timber floors for new build, refurbishments or conversions.
Acoustic Overlay Platform System for Timber Floors Isocheck 28T 2400mm x 600mm x 28mm consi..
28mm Isofoam (diameter 25mm) is a piling and debonding foam sleeve manufactured from polyethylene used to prevent the concrete adhering to the reinforcing bars and for insulating heating and plumbing pipes.
ISO Foam has low thermal conductivity of 0.036W/mK at 0 °C therefore its reduces the loss ..
28mm Isofoam (diameter 25mm) 2000mm length
Piling and Debonding Foam Polyethylene Sleeve
Used also for insulating heating and plumbing pipes
Used to prevent the concrete adhering to the reinforcing bars
Sound absorbing properties, reducing pop and flow noises in pipes