Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
Internal wall insulation is an economic and alternative way to insulate solid masonry wall with inner insulation designed to increase the thermal performance and improve its airtightness. Most often it requires the use of PIR rigid boards, phenolic boards or rock wool roll. The thickness of insulation needed to insulate the wall internally strongly depends on the specific U-value that you want to achieve. A lower figure means better thermal performance. Current Building Regulations require a maximum U-value of 0.3W/m2 for existing buildings (0.16W/m2 for new buildings). Achieving that U-value for solid walls will mean installing at least 120mm of Kingspan, Xtratherm or Celotex rigid insulation. However, Kingspan Kooltherm® K118 is the most commonly used insulating material that meets current U-value requirements with just 50mm (62.5mm) thickness. Since is only 50mm thick it is a top-class three-in-one product for internal wall insulation used as mechanically fixed and adhesively bonded 'dot and dab' insulated plasterboard. The Kingspan Kooltherm K-range comprises the thinnest commonly used insulation products for any specific U-value. With a fibre-free rigid thermoset phenolic core, and a thermal conductivity of 0.018 - 0.023 W/mK, these are the most thermally efficient insulation products commonly used in internal wall applications. There are many other popular UK products such as Knauf EPS Thermal Laminate or Gyproc ThermaLine Basic Insulated Plasterboard. However meeting specified U-value requirements won’t be possible with such materials as it is low cost product based on EPS core designed only for single walls. For instance, if you insulating less than 50% of the room. All other internal insulation products would require bulkier product to be used: 120mm Celotex PIR, 150mm of Knauf® or Rockwool® Mineral Wool and 200mm of EPS100 polystyrene. It is worth to mention insulation called 10mm Sempatap Thermal Wallpaper. This type of insulation became extremely popular in the UK due to their unique ultra-thin thickness properties. Internal insulation will straightforwardly absorb sound waves and reduce vibration due to its density. Because of that, it promotes comfort and privacy, protecting people from ‘outside-to-inside’ noise such as traffic, and ‘inside-to-inside’ noise from neighbouring dwellings. If you insulate more than 50% of the internal walls of the room you need Building Regulation approval. If you live in a house with no cavity walls it is not recommended to use such insulation as it may get you damp problems. If your house was built after the 1920s, it is likely to have cavity walls.
Internal wall insulation is 50% cheaper than external wall insulation but unfortunately less effective, potentially more problematic and more disruptive. It needs careful planning as it more likely causes damp problems.
Also you should expect to lose at least 100mm on each wall when insulating interior walls. The thickness of internal wall insulation varies. You can expect it to be anywhere from 62.5mm to 200mm.
IS INTERNAL WALL INSULATION WORTH IT?
Colloquially speaking if you don't have any other options to insulate your solid wall, an internal wall insulation system is the way to go, the more so as its cost is much lower. The major advantage of internal insulation compared to other insulation methods is nothing but the insulation cost. Regardless of the manufacturer, internal wall insulation will add physical thickness to the wall, most evident at the reveals and eaves, and also will keep the wall at external ambient temperature and thereby draw the dew point towards the internal surface. To help prevent damp penetration, a vapour control layer will need to be installed. It may also disrupt things inside your property in the way that any refurbishment would, so you won't be able to easily live in the house during the work. On the other hand the internal surface of an insulated wall will be warmer. Installing internal wall insulation is better than doing nothing, for sure. You have better payback than external wall insulation, which possibly makes it worthwhile overcoming mentioned problems. Moreover, internal wall insulation grants are available as part of the Government’s Energy Company Obligation (ECO). The scheme provides grants for home owners and private renters who would otherwise be unable to afford to insulate their homes. Grants are paid for by energy companies and the scheme aims to reduce fuel poverty while also reducing carbon emissions.
INTERNAL WALL INSULATION COST
The costs given here are given in good faith as an indicative guide only and should be used with understanding. Insulationgo Limited cannot accept any liability for any budget produced using these figures.
The actual cost of internal wall insulation will vary according to the type of insulation specified. You should expect to pay anything between £10/m2 to £45/m2 and £130/m2 when a new stud wall is built. In terms of m2 coverage cost internal insulation can be classified in particular order:
But when it comes to performance the list takes the following form:
Phenolic Boards Insulation - Thermal Conductivity of 0.018W/mK
PIR Rigid Insulation Boards - Thermal Conductivity of 0.022W/mK
Rock wool Insulation - Thermal Conductivity of 0.035W/mK
Fibreglass Insulation - Thermal Conductivity of 0.044W/mK
Sempatap thermal wallpaper - Thermal Conductivity of 0.194W/mK
TYPES OF INTERNAL WALL INSULATION
Depending on the available space and your budget you can choose between 6 types of internal wall insulation.
1. PHENOLIC INSULATED PLASTERBOARD
Phenolic insulation bonded to plasterboard is a premium performance, factory-bonded wallboard to a fibre-free rigid thermoset phenolic core insulant. It provides a level of performance that is unrivalled in the world of rigid thermoset insulation materials with a thermal conductivity of just 0.018 W/mK across all thicknesses. Manufactured with a blowing agent that has zero ODP and low GWP, it is an insulated plasterboard for mechanically fixed and adhesively bonded insulated dry-lining. Provides internal dry lining and insulation in just one fixing operation, giving faster completion times. Boards provide exceptional thermal performance for both new build and refurbishment projects. Can be plastered with either Thistle Board Finish or Thistle MultiFinish plaster. All boards are easily applicable measuring 2400mm x 1200mm. Depending on the design, you can choose from various brands. All of the brands offer a variety of sizes and thicknesses. Kingspan Kooltherm K118 and its alternative Xtratherm Safe-R SR/TB insulated boards are the most effective type of rigid phenolic insulation boards currently available in the UK.
Cost: £35.42/m² (ex VAT) 62.5mm, £25/m² installation Disadvantages: expensive to buy, causes pipework corrosion.
2. THIN THERMAL WALLPAPER
Sempatap Thermal solid wall insulation is a 10mm thick roll of insulation manufactured from latex foam that’s faced with a coated woven fiberglass layer. It’s been used in many applications by local housing authorities, private landlords and homeowners to minimise their energy bill and improve the thermal performance of their home. Sempatap thermal has been tested by numerous organisations including the National Physical Laboratory whose results showed that it will reduce the ‘u’ value (coldness) of a wall by nearly 30%. Sempatap thermal not only has outstanding thermal performance but can also be used as acoustic insulation on walls and ceilings. It is easy and quick to install and the economic solution for insulating your home to reduce heat loss and lower your heating bills. It is applied much like wallpaper. Since it’s only 10mm thick there’s no need to fiddle with extending services. On a standard solid 9 inch brick wall, Sempatap Thermal can make the wall up to 30% more efficient offering thermal resistance of 0.194W/mK
Product:
Sempatap Thermal Wallpaper
Cost: £22.80/m2 (ex VAT) 10mm, £16/m² installation Disadvantages: expensive to buy
3. PIR INSULATED PLASTERBOARDS
PIR insulation bonded to plasterboard is a high performance, easy to install polyisocyanurate insulation board, laminated to a piece of 12.5mm or 9.5mm tapered edge plasterboard. These insulated plasterboards also incorporate an integral vapour control layer, which helps to reduce the risk of condensation. Moreover, it provides a continuous layer of thermal insulation across studs in timber frame walls removing the ‘thermal shorts’ that occur at the framing which can reduce the insulation value of a conventional wall by up to 20%. Designed to achieve excellent thermal u-value where minimal cavity is required giving buildings continued thermal efficiency throughout their life span. In terms of thermal conductivity, panels can be classified as a middle class product offering 0.022W/mk. They are easy to handle and quick to install. All boards are easily applicable measuring 2400mm x 1200mm. Boards can be fixed with plasterboard screws or even adhesive, making it an easier option. The thermal laminates boards are suitable for direct bonding ('dot and dab') and mechanically fixed installation techniques. Therefore it has been incredibly popular due to installation time and cost. The ability to install quickly is a huge advantage. This 2 in 1 product brings a whole host of benefits to your home. Starting from low labour costs to low heating bills. Future costs will be kept down due to the energy efficiency of Thermal Plasterboard. In fact, 72.5mm Celotex PIR core insulated plasterboard turned out to be a great alternative to phenolic core 62.5mm Kingspan Kooltherm K118.
Cost: £24.15/m² (ex VAT) 62.5mm, £16/m² installation Disadvantages: expensive to buy
4. EPS INSULATED PLASTERBOARD
EPS insulated plasterboard so called "Thermal laminate" or "Thermal basic" is a combination of a 9.5mm gypsum based wallboard, strongly bonded to expanded polystyrene (EPS) insulant that can be used internally in new build and refurbishment projects requiring a basic thermal upgrade. These types of panels are often associated with the brands such as British Gypsum, Knauf or Warmline. All brands offer thinnest insulated plasterboard as thin as 22mm thick and offer certified thermal conductivity of 0.038W/mK. Those types of insulation are no doubt the best available options in the UK. They are quick and easy to install measuring in length 2400mm and 1200mm in width. Omitting all the details it can be said that they were all designed to be a simple and effective way to improve the thermal efficiency in both walls and roof applications.
Cost: £16.31/m² (ex VAT) 40mm, £16/m² installation Disadvantages: suitable only where the basic level of performance is required
5. FIBREGLASS INTERNAL WALL INSULATION ROLL
Fibreglass insulation is essentially an insulating material that is built into your internal side of your wall. Glass wool is one of the most popular insulation used to insulate walls internally. It is probably the most common and non-combustible type of insulation used to insulate a wall from inside, however it’s itchy and gets everywhere with very little effort. If the insulation gets wet, you will need to replace it a soon as possible. To get decent thermal performance, you need a lot of insulation rolls which can quickly eat into your room space. However, it is the cheapest and most favoured option. This is one of the most popular types of insulation, mainly due to the fact it’s been around for so long and is widely available from most building merchants such as Screwfix, B&Q or Wickes. Being lightweight, it has a good thermal conductivity of 0.044 W/mK.
Cost: £2.96/m² (ex VAT) 100mm, £16/m² installation Disadvantages: irritating during installation, takes a lot of space.
6. ROCKWOOL INTERNAL WALL INSULATION
Rockwool wall insulation is manufactured in sheets that are pre-cut to fit between wall timber frame construction. Boards will boost thermal performance and improve acoustics. Slabs are provided in sizes that are easily transportable and good for handling measuring 1200mm x 600mm. Rockwool and Knauf are main players in the UK market. General-purpose rock wool insulation boards such as RWA45, RW5 or RW3 are perfect for internal wall applications. Range slabs include the following thicknesses:
25mm ǀ 30mm ǀ 40mm ǀ 50mm ǀ 60mm ǀ 75mm ǀ 90mm ǀ 100mm
Cost: £10.51/m² (ex VAT) 100mm, £19/m² installation Disadvantages: irritating during installation, if any moisture settles in the insulation fabric it will eventually rot.
INTERNAL WALL INSULATION INSTALLATION
There are 4 basic methods of installing internal wall insulation. The most commonly used method is the insulated plasterboard Dot & Dab method. The installation process involves nothing but plasterboard adhesive. There are no physical holes left after this installation. Sheet stays originally flat with the paper coating intact. This method uses either British Gypsum Adhesive or Knauf Plasterboard Adhesive. Generally speaking, Dot & Dab methods tend to be 3 times faster to install as it takes between three and six hours to set, which means you could carry out jointing or skimming the same day. In contrast, plaster takes two to three days to dry. Second technique of fixing insulated plasterboard is called the standard timber method. In this particular situation, you should always mechanically fix wooden battens and screw the plasterboard to battens. This technique requires plasterboard screws, plasterboard wall plugs or other fixings in order to be ready to finish.
Metal frame is also considered to be one of the quickest options to insulate your internal walls. It is built to form a partition wall, offering flexibility to the layout of the space. Steel frame method offer strength and longevity that insulated plasterboard can’t compare with. Insulating the frame and particularly over the frame as well as between the joints stops thermal transfer. This makes the building more comfortable and energy efficient for the occupants.
There is also another method that has been in use in the UK and Europe for years. In fact, has been successfully installed in 1,000’s of flats and houses by Local Authorities, Housing Associations, private Landlords and homeowners. This remarkable thermal insulation is called 10mm Sempatap Thermal Wallpaper. Thermal wallpaper works by slowing down the rate at which cold walls soak up heat energy. Consequently, it insulates rooms considerably faster, in many cases increasing warm-up times by 65%. Thanks to its thickness, expertly blended material and advanced aerospace technology, this warmth is easily maintained even in the harshest weather conditions.
Novia VC2T is an innovative waterproof and flame resistant synthetic HDPE scrim reinforced laminate for use in temporary protection applications.
It is cheaper, lighter and more practical to use than the old-style paper versions.
Protecting heavily trafficked areas, new surfaces and finishes ..
Lightweight but strong, scrim-reinforced material
Flame-resistant to EN 13501 Class E - Fully waterproof
HDPE scrim reinforced - Recyclable
Roll weight of only 9kg - Lightweight
Suitable for a wide range of temporary applications
10mm Dufaylite 3D Paper Honeycomb Ultra Board 2440mm x 1220mm is a cost-effective and sustainable solution designed for both retail signage and display or 3D applications where strength and durability are essential.
Developed to be a genuine alternative to traditional MDF, corrugated centre, foam..
10mm Fermacell Firepanel is a homogeneous fibre-reinforced gypsum based dry lining fire protection board reinforced with non-flammable fibres for superior fire protection.
Firepanel A1 is a new dimension in fire protection for dry linings, an innovative development of the original Fermacell Gyps..
10mm Fermacell Firepanel Class A1 Non Combustible Fire Protection Board
Homogeneous fibre-reinforced gypsum based dry lining fire protection board
Firepanel is reinforced with non-flammable fibres for superior fire protection
Fully complies with construction building materials class A1 non-combustible
Firepanel partition system to EN 1364-1 provides 60 minutes fire rated lining
10mm White Edging Strip is a professional self-adhesive edginig solution designed for 3D Dufaylite Honeycomb Ultra Boards.
Edging Roll is easy to apply, fully recyclable and requires no tools other than a pair of scissors.
Available in black or white on a standard 50m roll.
Made from a raw ..
110mm Celotex XR4000 PIR Insulation Board (XR4110) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for floor, wall, roof and ceiling cut-to-fit applications.
Celotex Insulation Board is an excellent ..
12.5mm Knauf Fire Panel Plasterboard Fire Shield is a high quality gypsum based tapered edge plasterboard with additives for fire performance that is suitable for Fire Rated partitions and any other drylining application where fire rating is crucial.
Knauf Fire Resistant Plasterboard with a Pink ..
Superior Fire Protection
Partitions and Lining Systems
Plaster Finish or for direct Decoration
Plasterboard with a Pink Paper Face
Fire-Panel can provide up to 1 Hour Fire Resistance
12.5mm Knauf Moisture Panel Moisture Resistant Plasterboard is a gypsum plasterboard with water repellent additives for moisture performance that is suitable for kitchens and bathrooms and other internal areas subjected to high humidity.
Knauf Moisture Shield Plasterboard with a Green Paper Face ..
12.5mm Knauf Sound Panel Acoustic Plasterboard Sound Shield is an enhanced special gypsum tuned core acoustic plasterboard that greatly reduces any noise impact in adjacent rooms, flats, acoustic partition walls or properties.
Knauf Sound Shield Tapered Edge Plasterboard with a Blue Paper Face ha..
12.5mm Knauf Vapour Panel Foil Backed Plasterboard is a strong vapour check laminated plasterboard with a metallised polyester foil laminate on the grey colour paper back for lining external walls and roofs.
Foil Backed Plasterboard is a combination of standard wallboard and laminate with metalli..
12.5mm Knauf Standard Wallboard Plasterboard is an effective, versatile and good value standard plasterboard with an ivory paper face, ideally suited to receive a plaster finish, or for direct decoration.
Wallboard is a standard gypsum based plasterboard for general application where basic fire, ..
Siniat Weather Defence External Sheathing Board 12.5mm x 1200mm x 2400mm is a strong, moisture resistant A1 non-combustible exterior sheathing board faced with water repellent material that is compliant for structures above 18m in height.
Weather Defence™ is a revolutionary facade external sheath..
DensGlass A1 Fire Rated Sheathing Board 12.7mm is an A1 non-combustible external sheathing board that consists of a fibreglass mat with a gypsum core, designed to provide a high degree of protection from the elements in external cladding constructions.
12.7mm DensGlass Gold Sheathing Board is an ..
12.7mm Promat MONOLUX 800 (MST 800) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 800 High Performance Fire Protection Board is a tough and durable, resistant to..
Monolux 800 - providing up to 240 minutes Fire Resistance
MST-800 - 1000°C - Easy to Decorate with Paints, Wallpapers or Tiles
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
12.7mm Promat MONOLUX 500 Fire Board (MST 500) is a robust low thermal conductivity rigid fire protection board specifically formulated without asbestos and mineral fibres for use in constructions and insulation linings.
Monolux 500 High Performance Fire Protection Board 12.7mm is a tough and dur..
Easy to Decorate with Paints, Wallpapers or Tiles
Monolux 500 - providing up to 240 minutes Fire Resistance
Suitable for Plants and single skin Insulation in Ovens and Dryers
Resistant to Moisture and Chemicals - Asbestos FREE - Non-combustible
Ducts & Services Protection, Fire Door, Heat Shields, Single Skin Partitions
12.7mm Promat PROMATECT®-MST Fire Resistant Board is a rigid non-combustible insulation board specifically formulated without asbestos and mineral fibres used as a thermal break in process plants and as single skin insulation in ovens and dryers.
Fire Protection Board Promatect-MST 12.7mm is an e..
Promat PROMATECT®-MST A1 Fire Resistant Board 12.7mm
Effective and stable fire insulation solution for demanding applications
Good rigidity properties even when exposed to high temperatures of 1000ºC
Rigid fire insulation board with up to 240 minutes fire resistance (protection)
12mm Cembrit PB Permabase (UNIPAN) Cement Board is a fibreglass-mesh reinforced, lightweight, water-resistant cement board with tapered edges, used on external applications, such as rendering, brick slips or stone cladding.
This rigid cement and aggregate based board incorporates polystyrene bead..
12mm Cembrit PB Permabase UNIPAN Cement Board A1
External applications: rendering, brick slips or stone cladding
Tapered edges to facilitate invisible butt joint installation
Reinforced board with resistance to moisture and mould growth
A1 non-combustible reinforced, water-resistant fire rated cement board
12mm Promat PROMATECT®-250 is a mineral bound lightweight calcium-silicate fire protection board made with PROMAXON® technology, used for the fire protection of structural steel ‘H’ or ‘I’ shaped beams and columns and mezzanine floors.
Promat PROMATECT 250 is a 2500mm long by 1200mm wide calcium ..
12mm Promat PROMATECT 250 Fire Protection Board
A1 non-combustible low density calcium-silicate insulation board
PROMATECT®-250 is made with special PROMAXON® technology
Used for protection of steel structures and mezzanine floors
Provides up to 150 minutes fire protection to structural steelwork
15mm Glasroc F FireCase Fire Protection Board British Gypsum is a highly versatile, non-combustible, Class A1 and Class 0 glass-reinforced gypsum based plasterboard used mostly as part of the FIRECASE frameless structural steel encasement system, giving up to 120 minutes fire protection and in the G..
15mm Novia Double-Sided Butyl Tape is a high-quality sealing tape designed for Vapour Control Layer (VCL) installation.
This 22.5m long polyisobutylene based tape is economical and non-toxic solution.
Butyl tape is easy to install, tools are not required for application.
For use in applicat..
Vital for airtight installations
Very good adhesion properties
for Vapour Control Layer installation
Use in conjunction with Novia Metallised BOPP tape
15mm PIR Rigid Insulation Board Xtratherm (Unilin) 1200mm x 1200mm is a thinnest rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Unilin (Xtratherm) PIR insulation boards are stable, rot proof and will remain..
1200mm x 1200mm x 15mm
Foil Faced PIR Rigid Foam Insulation Board
Certified thermal conductivity as low as 0.022W/mK!
15mm Promat PROMATECT-XW is an A1 non‑combustible and moisture resistant Fire Protection Board used for the protection of structural steel giving up to 60 minutes fire protection to structural steel columns and beams.
PROMATECT-XW is used to provide one, two, three or four sided encasements to: c..
15mm Promat PROMATECT-XW A1 Fire Protection Board
Fully tested at limiting temperatures from 300ºC to 650ºC
60 minutes fire protection to structural steel columns and beams
Thinner solution in comparison with other fire‑resistant constructions
Quick, easy to cut and install saving time and reducing installed cost
15mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a thinnest PIR rigid thermal foam insulation board used in roof construction to achieve Future Home and Passive House Standards.
XT/PR Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal con..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin XT/TF Thin-R Timber Frame Insulation Board is a thinnest PIR rigid thermal foam insulation board used in wall construction to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conduct..
15mm Unilin XT/UF Thin-R Floor Insulation Board is a thinnest PIR rigid thermal foam insulation board used in floor construction to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/m..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin (Xtratherm) Thin-R Insulation Board (2400mm x 1200mm x 15mm) is an ultra thin rigid foil faced polyisocyanurate (PIR) thermal foam multi-application insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm (Unilin) Thin-R range is a high-efficienc..
16mm Dufaylite 3D Paper Honeycomb Ultra Board 2440mm x 1220mm is a cost-effective and sustainable solution designed for both retail signage and display or 3D applications where strength and durability are essential.
Developed to be a genuine alternative to traditional MDF, corrugated centre, foam..
16mm White Edging Strip is a professional self-adhesive edginig solution designed for 3D Dufaylite Honeycomb Ultra Boards.
Edging Roll is easy to apply, fully recyclable and requires no tools other than a pair of scissors.
Available in black or white on a standard 50m roll.
Made from a raw ..
20mm Kingspan ThermaFloor TF70 Floor Board is a fibre-free rigid thermoset foam insulation board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
Thermafloor TF70 Kingspan is a high performance flooring insulation suitable for use below the scr..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS
Kingspan ThermaPitch TP10 Board 20mm is a high performance pitched roof insulation board with fibre-free rigid thermoset PIR foam core used for under rafter or between and over joist applications.
20mm Thermapitch TP10 Kingspan PIR 2400mm x 1200mm board is an insulation sheet suitable for tiled o..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES
20mm Kingspan Thermawall TW55 Insulation Board is a rigid insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Thermawall TW55 Kingspan is a high performance insulation board suitable for use with timber frame and steel frame w..
20mm Promat Fire Board PROMATECT L500 is a special non-combustible low density calcium silicate fire insulation board, used for the construction of fire resistant ducts, cladding of sheet metal ducts and to provide fire rated cable and service enclosures.
Promat L500 PROMATECT 20mm is off white i..
A1 Non-Combustible - Calcium Silicate Fire Protection Board
To provide Fire Rated Cable and Service Enclosures
Fire Protection (Resistance to Fire): 30-240minutes
PROMATECT - Fire Resistant Ducts, Cladding of Sheet Metal Ducts
Promat-L500 is resistant to the Moisture (damp or humid conditions)
20mm Promat VERMICULUX-S is an A1 class non-combustible calcium silicate board which provides up to 240 minutes fire protection for buildings storing high value items or assets, including museums, data centres and bonded warehouses.
VERMICULUX-S is used to protect one, two, three or four sided en..
21mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one so..
21mm Unilin FR/TP Warm Roof Insulation Decking is an insulated panel made of 15mm PIR rigid foam insulation core bonded to 6mm WBP grade plywood used for new and refurbishment flat roof applications.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight f..
22mm Gyproc Thermaline Basic Insulated Plasterboard is a 9.5mm Gyproc wall board factory-bonded to CFC and HCFC-free expanded polystyrene insulation core used where a basic level of thermal insulation is required.
BG Gyproc ThermaLine basic is a standard insulated plasterboard suitable for drylin..
22mm Knauf EPS Thermal Laminate is an insulation board bonded to 9.5mm tapered edge plasterboard with a certified thermal conductivity of 0.038W/mK that can be used in both refurbishment and new-build where a standard (basic) level of thermal insulation is required.
Knauf Insulating Laminate 22mm..
24.5mm (15mm) Unilin XT/TL Insulated Plasterboard is made of 15mm Unilin PIR insulation core bonded to 9.5mm plasterboard used for internal walls, ceilings, pitched and flat roof applications.
Unilin XT/TL Insulation and Drylining Board provides an effective vapour control layer and is suitable..
15mm Unilin PIR insulation core bonded to 9.5mm plasterboard
Used for internal walls, ceilings, pitched and flat roof applications
Suitable for a variety of wall types for both refurbishment and new build
Unilin XT/TL thermal laminate incorporates an integral vapour barrier
Improves energy efficiency of your home by reducing energy costs
24.5mm Unilin XT/TL-MF (Mech Fix) is a foil backed insulated plasterboard made of 15mm Unilin PIR insulation core bonded to 9.5mm plasterboard used for internal walls, sloped roofs and ceilings.
The composite foil facing on Unilin XT/TL-MF Insulation and Drylining Board provides a gas and vapour ..
24.5mm Xtratherm XT/TL Thermal Liner Composite Insulated Plasterboard Dot & Dab is an insulated panel combined of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm tapered edge plasterboard that is suitable for internal applications, fixed with adhesive dot and dab direct b..
24.5mm Xtratherm Thin-R XT/TL-MF Thermal Liner Mech Fix is an insulated panel combined of PIR rigid insulation foam core bonded to 9.5mm plasterboard suitable for internal masonry walls, sloped rafters and ceilings.
Xtratherm XT/TL-MF Mechanically Fixed Drylining Board is a highly versatile and d..
Provides Effective Vapour Control Layer
Reducing Energy Consumption and Costs
For a Variety of Wall Types - Internal Walls, Sloped Roofs, Ceilings
Insulation & Drylining in one Application - Refurbishment & New Build
XT/TL-MF is only suitable for mechanically fixed applications
24mm Plydeck Xtratherm (PIR with OSB Board) Flat Roof Insulation Decking is a three-in-one solution designed to provide decking, vapour control layer and high levels of thermal insulation in one easy applicable flat roof product.
Xtratherm Plydeck is a composite board of enhanced PIR (polyisocyan..
25mm URSA Acoustic Partition Insulation Roll APR is a lightweight non-combustible glass mineral wool insulation, offering high level of sound absorption and noise reduction in timber or metal framed internal partition walls, timber or metal framed separating walls and timber separating floors.
UR..
25mm Black Foil Faced Two Sides Knauf RS45 Slab is a semi rigid rock mineral wool black foil backed on both sides insulation slab with an excellent class A1 fire performance.
Knauf RS45 Black foil backed on both sides slab provides outstanding fire, thermal and acoustic performance for both new b..
25mm Black Foil Faced x2 Sides Knauf RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS45)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
25mm Knauf RS60 Black Foil Backed Two Sides Slab is an insulation solution specially designed for concrete soffits, an A1 class non-combustible rock mineral wool slab.
Black foil backed and faced 60kg density insulation slab is less visible than the silver foil which is handy specially during the..
25mm Black Foil Faced x2 Sides Knauf RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (x2 Foil Faced RS60)
Double Sides Black Foil Faced Slab accumulates heat on one side of the slab
25mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab is a non-combustible rock mineral wool black foil backed insulation slab with an excellent class A1 fire performance.
Knauf RS45 1200mm x 600mm x 25mm black foil backed slab provides outstanding fire, thermal and acoustic performance for b..
25mm Black Foil Faced Knauf Rocksilk RS45 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 45kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS45)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
25mm Aluminium Black Foil Backed Knauf RS60 60kg Slab is a rigid class A1 non-combustible rock mineral wool insulation slab faced with a reinforced black aluminium foil.
The black aluminium foil faced insulation slab accumulates heat on one side of the board, unlike the aluminium silver foil that..
25mm Black Foil Faced Knauf Rocksilk RS60 Insulation Slab A1 Class
Class ‘O’ to the Building Regulations and Class A1 fire performance
Density of 60kg/m3 with an excellent thermal and acoustic properties
Provides from 30 up to 240 minutes of fire protection (Foil Faced RS60)
Black Foil Faced Insulation Slab accumulates heat on one side of the board
25mm Foil Faced on Both Sides Rocksilk RS45 Knauf Fire Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool two-sided foil-faced slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm x 25mm double sided alum..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible - Odourless, Rot Proof, Non-Hygroscopic
Durability: do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
25mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 24..
25mm EPS70 Polystyrene Insulation Board Stylite is a cost-effective, quick and easy to install thermally efficient standard EPS insulation board which will remain effective for the life span of the building.
Stylite SPI Expanded Polystyrene Insulation Board 25mm is suitable above a concrete slab ..
25mm Foil Faced Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil backed rigid insulation slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm aluminium foil slab..
25mm Foil Faced Rocksilk RS45 Knauf Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS45 1200mm x 600mm foil backed slab provides ..
25mm Foil Faced Rocksilk RS60 Knauf Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil backed building slab with a great fire performance classified as Euroclass A1, suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm aluminium foil insulation sl..
25mm Foil Faced on Both Sides Rocksilk RS100 Knauf Insulation Slab is a high-density (100kg/m3) non-combustible rock mineral wool foil-faced two-sides rigid insulation slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS100 1200mm x 600mm aluminium foi..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame Non-combustible
Provides excellent fire, thermal and acoustic performance.
25mm Foil Faced on Both Sides Rocksilk RS60 Knauf Fire Insulation Slab is a medium density (60kg/m3) non-combustible rock mineral wool foil-faced two-sides slab with a great fire performance (Class A1) suitable for use in multiple applications.
Knauf RS60 1200mm x 600mm aluminium foil insulation ..
FOIL FACED BOTH SIDES Slab - FFx2
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 Excellent thermal and acoustic properties
Class 1 Surface Spread of Flame - Non-combustible
Durability: will not encourage the growth of fungi, mould or bacteria.
25mm Knauf Earthwool APR Acoustic Insulation Roll is a flexible and durable non-combustible glass mineral wool sound insulation roll which offers high level of sound absorption and noise reduction in internal wall, partitions and floor applications.
Knauf APR Sound Insulation Roll 25mm is manufac..
25mm Rocksilk RS60 (Rock Mineral Wool Slab) Knauf Insulation Building Slab is a medium density (60kg/m3) non-combustible rock mineral wool unfaced slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combust..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 60kg/m3 - Excellent thermal and acoustic properties
25mm Promat PROMASIL-1000L Fire Insulation Board 1000°C is a large-size, lightweight fire insulation board with very good thermal properties and thermal stability up to 1000°C, used in the fireplaces and stoves systems.
Promat PROMASIL-1000L Boards are often used in heavy industry for anode bakin..
25mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C is a lightweight fire insulation board with very good thermal properties and thermal stability up to 1050°C, used in the fireplaces and stoves construction.
Promat PROMASIL-1100 SUPER Boards are suitable for multiple uses in single layer sys..
25mm Promat PROMASIL-1100 SUPER Insulation Board 1050°C
Fireplaces, Wood Burning Stoves, PROMAFOUR® fireplace systems
Very good thermal properties and thermal stability up to 1050°C
Extra low thermal conductivity calcium-silicate fire insulation board
Multiple uses in single layer systems for penetration seals in walls and slabs
25mm Recticel Eurothane General Purpose Insulation Board is an easy to cut and fit PIR rigid insulation board faced with a gas diffusion tight multilayer foil on both sides that is suitable for pitched roof, timber and steel framed walls, ceilings and floor applications.
Recticel Eurothane GP 240..
25mm Rocksilk RS100 Knauf (Rock Mineral Wool) Insulation Building Slab is a high-density (100kg/m3) non-combustible rock mineral wool unfaced rigid slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combus..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘0’ to the Building Regulations - Euroclass A1
Density: 100kg/m3 Excellent thermal and acoustic properties
25mm Rocksilk RS45 Knauf Rock Mineral Wool Insulation Slab is a standard density (45kg/m3) non-combustible rock mineral wool building slab designed for use in multiple applications with a great fire performance classified as Euroclass A1, which is the highest fire rating for non-combustible material..
Class 1 Surface Spread of Flame - Non-combustible
Class ‘O’ to the Building Regulations - Euroclass A1
Density: 45kg/m3 - Excellent thermal and acoustic properties
25mm Rockwool RW3 Acoustic Insulation Slab (Prorox SL930) is a robust, medium-density (60kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using RW3 Insulation in cei..
RW3 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RW3 insulation slabs achieve Lambda 0.034W/mK
RW3 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
25mm Rockwool RW5 Slab Acoustic, Fire and Thermal Insulation (Prorox SL960) is a strong, high-density (100kg/m3) non-combustible resin bonded rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls.
Using Rockwool ..
RW5 is rated Euroclass A1 non-combustible
Excellent thermal, Acoustic (100kg density) and fire performance
25mm Rockwool RWA45 Acoustic Insulation Slab (Prorox SL920) is a robust, standard density (45kg/m3) non-combustible resin bonded semi-rigid fire resistant insulation slab designed for use in floors, roofs at rafter level, partitions, ceilings, steel and timber frame walls.
Using RWA45 Acoustic In..
RWA45 is rated Euroclass A1 non-combustible
Excellent thermal, acoustic and fire performance
RWA45 insulation slabs achieve Lambda 0.035W/mK
RWA45 is a robust insulation solution for a range of general building applications
Durable insulation solution which will maintain high performance over the lifetime of the building
25mm Unilin Thin-R XT/CW PIR Cavity Insulation Board is used in traditional masonry walls, built to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.
Unilin Cavity Wall (T&G) tongue and groove jointing offers a practical onsite solution..
25mm Unilin Thin-R XT/CW Partial Fill Cavity Wall Insulation Board
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CW improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
27.5mm Celotex PL4000 PIR Thermal Insulation Board (PL4015) is an easy to install high-performance insulated plasterboard consist of polyisocyanurate rigid insulation foam core bonded to 12.5mm plasterboard that can be used in pitched roofs (underneath the rafters), flat roofs (underneath the joists..
Vapour Barrier build in
External walls – internal lining
Pitched roofs – underneath the rafters
Flat roofs – underneath the joists
Time saving 2 in 1 solution - insulate and dry line walls
27.5mm (28mm) XT/TL-FR is a fire resistant insulated plasterboard made of 15mm Unilin PIR foam insulation core bonded to 12.5mm fire plasterboard used in drylining applications where fire rating is crucial.
Fire Resistant Insulated Plasterboard with a Pink Paper Face offers 30 minutes fire protec..
27.5mm (28mm) XT/TL-FR Fire Resistant Insulated Plasterboard
Fire plasterboard used in drylining applications where fire rating is crucial
Pink Paper Front Face offers 30 minutes fire protection in a single layer
Provides an effective vapour control layer (integral vapour barrier build in)
FR Insulated Plasterboard can be readily cut using a sharp knife or fine toothed saw
27.5mm Unilin XT/TL-MR is a moisture resistant insulated plasterboard made of 15mm Unilin PIR foam insulation core bonded to 12.5mm moisture resistant plasterboard used in high humidity conditions.
Unilin XT/TL-MR Moisture Resistant Insulation Board improves moisture resistance and thermal perfor..
27.5mm Xtratherm XT/TL-MR Thermaliner PIR Moisture Resistant is an insulated plasterboard combined of PIR insulation core bonded to 12.5mm moisture resistant plasterboard designed for internal building areas of high humidity conditions.
XT/TL-MR Thermal Liner Unilin is designed to improve moistur..
Provides Effective Vapour Control Layer
Improving Moisture Resistance and Thermal Performance
Applications: Kitchen and Bathroom Walls and Ceiling Installations...
Insulation & Drylining in one Application - Refurbishment & New Build
Strong Moisture Resistant Paperliners - Water Repellent
30mm IKO Enertherm ALU PIR Insulation Board is a multi-functional insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gas-tight aluminium construction.
IKO PIR Insulation Board 30mm can be used on flat roofs, pitch roofs, loft floors, cavity walls, clad..
The 30mm Knauf RS140 is a rock mineral wool insulation slab with an excellent class A1 fire rating to BS EN 13501-1 used in multiple thermal and acoustic applications where 140kg/m3 density is critical.
RS140 Rocksilk is manufactured with a density of 140kg/m3, designed for use in a variety of ap..
30mm x 600mm x 1200mm Knauf Rocksilk RS140 (140kg/m3)
Class A1 Non-combustible Rigid Rock Mineral Wool Insulation Slab
Fire, thermal and acoustic insulation slab used for building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceiling, timber & steel frame
30mm Rockwool RW6 (140kg) is a rigid class A1 non-combustible resin bonded insulation slab with an excellent fire, thermal and acoustic properties used for a wide range of building applications.
Rockwool RW6 Slab is manufactured in 140kg density per cubic meter (140kg/m3), specially designed for ..
30mm x 600mm x 1200mm Rockwool RW6 (140kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
30mm Foil Faced 2 Sides Rockwool RW6 (140kg) is a foil faced and backed class A1 insulation slab with an excellent fire, thermal and acoustic properties used for a wide range of building applications.
Foil Faced Two Sides (FFx2) Rockwool RW6 30x600x1200mm fire performance integrity is 240 minutes..
30mm x 600mm x 1200mm Foil Faced x2 Sides Rockwool RW6 (140kg/m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
30mm Foil Faced Rockwool RW6 (140kg) is a foil backed class A1 non-combustible insulation slab with an excellent fire, thermal and acoustic properties used for a wide range of building applications.
Rockwool RW6 Foil Faced x1 Side Slab 30x600x1200mm fire performance integrity is 240 minutes, and ..
30x600x1200mm Foil Faced x1 Side Rockwool RW6 (140kg density m3)
Class A1 Non-combustible Rigid Stone Wool Insulation Slab Rockwool RW6
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 140kg density per m3 - Class ‘0’ to Building Regulations
Used in soffits, floors, roofs at rafter level, partitions, ceilings, walls
30mm Sundolitt® XPS300 (300kPa) Insulation Board is a highly-durable rigid thermal insulation board made of extruded polystyrene used in high moisture environments such as inverted roofs, flat or zero pitch roofs and green roofs systems.
XPS 300 Sundolitt is a lightweight, easy to cut extruded po..
30mm Terrawool TW50 Acoustic Insulation Slab is a standard density (50kg/m3) non-combustible thermal and acoustic stone wool insulation slab used to insulate the floors, internal partition walls and separating wall applications.
Terrawool TW50 Insulation Slab 30mm is a high-performance recyclable..
30mm Soprema XPS 300 SL is a high quality, waterproof and strong rigid extruded polystyrene insulation board used as a durable thermal solution to technically demanding applications where high compressive loading (300kPa) is a requirement.
XPS SL 300 1250mm x 600mm x 30mm is designed for use in c..
30mm BASF Styrodur® 3000 CS XPS Insulation Board is an innovative multipurpose thermal insulation board made of extruded polystyrene with smooth surfaces and shiplap edges for almost all applications in structural and civil engineering.
Styrodur® 3000 CS XPS comes in 1265mm long by 615mm wide she..
30mm Xtratherm XPS 300 is a high performance rigid extruded polystyrene insulation board providing a durable thermal solution to technically demanding applications where high compressive loading of 300kPa is a requirement.
Extruded Polystyrene XPS 300 is an ideal solution for use in commercial, i..
30mm Extruded Polystyrene Xtratherm XPS 300 kPa
For use in commercial, industrial and cold storage areas
Closed-cell structure, which prevents moisture-absorption
Very low lambda values and compressive loading capabilities
Xtratherm XPS Sheets are 1250mm long by 600mm wide boards
310ml Promat PROMAFOUR GLUE 1000 is a versatile non-combustible ready for use refractory silicate based glue which resists temperatures up to 1000 °C, used in construction of a PROMAFOUR mantelpiece and is the ideal solution for fireplaces.
PROMAFOUR GLUE-1000 bonds permanently with glass fibre, ..
Colour: White-Grey
Classification temperature 1000 °C
Hardening Between: 12 - 24 h
Fire-resistance: Non-combustible
Promat Glue-1000 is the ideal solution for fireplaces
32.5mm K118 Kingspan Kooltherm (30mm) Insulated Plasterboard is an advanced 3 in 1 product for internal wall insulation used as mechanically fixed and adhesively bonded 'dot and dab' thermal insulated plasterboard.
Kingspan Kooltherm K118 range is a fibre-free rigid phenolic thermoset insulation ..
Kingspan Kooltherm K118 (previously K18 and K17)
Insulation, dry-lining and vapour control in one board
Easy to handle and install - Ideal for new build, retrofit and refurbishment
Standards & Approvals: ISO 9001 - ISO 14001 - BBA Certificate 16/5299
Premium performance insulation thermal conductivity of 0.019 W/mK
32.5mm Ultra Liner Insulated Plasterboard is a high-performance PIR rigid insulation board bonded to 12.5mm tapered edge plasterboard used for walls, ceiling and pitched roof applications.
This ultimate thermal laminate insulation board provides high levels of insulation and drylining in one appl..
32.5mm x 1200mm x 2400mm PIR Insulated Plasterboard
Ultimate thermal laminate insulation board for drylining
Ultraliner is used for walls, ceiling and pitched roof applications
PIR insulation core thermal conductivity (lambda) of 0.022W/mK
Ultra Liner PIR provides an effective Vapour Control Layer (VCL)
34.5mm Unilin SR/TB is an insulated plasterboard made of 25mm phenolic core between glass tissue/foil facings bonded to 9.5mm plasterboard used for drylining walls fixed with adhesive dabs.
The insulated drylining wall insulation Unilin Safe-R SR/TB with certified lambda value (thermal conductivi..
34.5mm Unilin SR/TB Insulated Plasterboard Drylining Walls (Dot and Dab)
Insulated plasterboard made of phenolic core between glass tissue/foil facings
Faced with 9.5mm plasterboard used for drylining walls fixed with adhesive dabs
Insulated drylining wall insulation Unilin Safe-R SR/TB lambda value of 0.020 W/mK
SR/TB Providing the solution of choice in new build and refurbishment projects
37.5mm Safe-R SR/TB Thermal Liner Xtratherm Insulated Plasterboard is a combination of 25mm premium phenolic insulation core with a composite foil facing bonded to 12.5mm tapered edge plasterboard for dry lining internal walls.
Safe-R Xtratherm SR/TB Thermal Liner is a high-efficiency thermal ins..
BBA Certification No.10/4803.
Integral Vapour (Check) Control Layer
Reaction to Fire Euroclass B-s1, d0
Suitable for Newbuild and Renovation Projects
High levels of insulation and drylining in one fix
37.5mm Unilin Safe-R SR/TB is an insulated plasterboard made of phenolic core between glass tissue/foil facings bonded to 12.5mm plasterboard used for drylining walls fixed with adhesive dabs.
The insulated drylining wall insulation Unilin Safe-R SR/TB with certified lambda value (thermal conduct..
37.5mm Unilin SR/TB Insulated Plasterboard Drylining Walls (Dot and Dab)
Insulated plasterboard made of phenolic core between glass tissue/foil facings
Faced with 12.5mm plasterboard used for drylining walls fixed with adhesive dabs
Insulated drylining wall insulation Unilin Safe-R SR/TB lambda value of 0.020 W/mK
SR/TB Providing the solution of choice in new build and refurbishment projects
37.5mm Unilin Safe-R SR/TB-MF is an insulated plasterboard made of phenolic core between foil facings bonded to 12.5mm plasterboard used for dry lining internal walls, sloped roofs and ceilings.
Foil facing on both sides of SR/TB-MF incorporates an integral vapour control layer, which helps to re..
37.5mm SR/TB-MR is a moisture resistant insulated plasterboard made of 25mm phenolic insulation core bonded to 12.5mm moisture resistant plasterboard used for dry lining in high humidity conditions.
MR Insulated Drylining Board improves moisture resistance and thermal performance by reducing effe..
38mm British Gypsum Gyproc ThermaLine PIR is an Insulated Plasterboard made from 12.5mm Gyproc WallBoard bonded to a 25.5mm rigid PIR (polyisocyanurate) foam with a multi-layer kraft aluminium facings on both sides of the insulation foam board.
Gyproc Thermaline PIR 38mm is a simple and cost-effe..
38mm Gyproc ThermaLine PIR Insulated Plasterboard
Multi-layer kraft aluminium facings on both sides
For both refurbishment and new build projects
Simple and cost-effective 2 in 1 insulated plasterboard
Provides insulation and dry lining in one operation
38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard is a high performance insulated panel consists of a 12.5mm Moisture Resistant plasterboard bonded to a 25.5mm rigid PIR foam core with a multi-layer aluminium and water repellent kraft facings on both sides.
Moisture Resistant In..
British Gypsum Gyproc Thermaline PIR MR
38mm Moisture Resistant Insulated Plasterboard
Water repellent kraft facings on both sides
Improves moisture resistance and thermal performance
3l Promat PROMAFOUR PRIMER is a versatile non-combustible priming paint based on liquid calcium silicate and small quantities of organic additives designed for walls, wood and other materials.
PROMAFOUR PRIMER bonds permanently with mineral substrates, is extremely water vapour permeable, highly ..
Colour: Milky
Classification temperature 1000 °C
Drying time: At least 12h
PROMAFOUR PRIMER bonds permanently
Excellent bonding on masonry and concrete surfaces
40mm Danopren XPS TR40 (Styrofoam) Insulation is a closed-cell extruded polystyrene foam board, commonly called 'Blue Board', manufactured as foam thermal insulation sheets used as an insulation in walls, roofs, foundations and as a water barrier.
XPS Insulation Danopren is an easy and safe to ha..
40mm Kingspan TW50 Thermawall Cavity Wall Insulation Board is a high-efficiency, BBA certified cavity insulation board designed for partial fill masonry cavity walls.
Thermawall TW50 is a stable and rot proof cavity wall insulation board used in newbuild and extension projects and will remain eff..
40mm Xtratherm XT/CW Partial Fill Cavity Wall is a high-quality, BBA certified, tongue and groove PIR insulation board with certified thermal conductivity of 0.022 W/mK designed for use in traditional masonry partial fill cavity walls.
Xtratherm Cavity Wall is a highly-durable, rot proof insulati..
50mm Novia Aluminium Foil Tape for Foil Faced Insulation is a highly-durable 30 micron Class 0 aluminium band with excellent cold weather adhesion that can be used for Vapour Control Layer, Damp Proof and PIR foil faced boards installations.
Aluminium Single-sided adhesive tape can be used for jo..
Backing Thickness 30 Micron - Total Thickness 70 Micron
50mm Celotex GA4000 PIR Insulation Board (GA4050) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for wall, floor, ceiling and roof cut-to-fit applications.
Celotex Insulation Board is an excellent h..
50mm Foil Faced Two Sides Rockwool RW4 is used to prevent the spread of flames, heat, smoke and fire through concealed spaces in buildings, a rigid class A1 non-combustible resin bonded insulation slab.
Rockwool RW4 Foil Faced 2 Sides Slab 50mm x 600mm x 1200mm fire performance integrity is 240 m..
Foil Faced x2 Sides Rockwool RW4 (80kg/m3) A1 Class 1200x600x50mm
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4 (FFx2)
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations (FFx2)
Fire performance integrity is 240 minutes, and 60 minutes for the insulation core
50mm Foil Faced Rockwool RW4 is used to prevent the spread of flames, heat, smoke and fire through concealed spaces in buildings, a rigid class A1 non-combustible resin bonded insulation slab.
Rockwool RW4 Foil Faced Slab 50mm x 600mm x 1200mm fire performance integrity is 240 minutes, and 60 min..
Foil Faced x1 Side Rockwool RW4 (80kg/m3) A1 Class 1200x600x50mm
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations
Fire performance integrity is 240 minutes, and 60 minutes for the insulation core
50mm Kingspan Kooltherm K112 Framing Board is a premium performance rigid thermoset phenolic insulation used between studs or as an insulating sheathing material.
Kooltherm K112 is an advanced insulation that allows target U-values to be reached with minimal thickness of insulation, an ideal solu..
50mm Knauf Rocksilk Flexible Insulation Slab is a functional thermal and acoustic multi-purpose rock mineral wool insulation slab which can be used to insulate a wide range of applications on site such as timber and metal stud partitions, timber frame walls and suspended timber floors.
Knauf Flex..
50mm Novia Double-Sided Adhesive Lap Tape is a high tack adhesive tape used for lap sealing breather membranes and temporary protection membranes.
Coated with adhesive on both sides lap tape provides advancing adhesion and good cohesion.
This tape should be used in conjunction with Novia Brea..
50mm Novia Single Sided Lap Tape for Breather Membrane is a special high strength sealing and bonding tape suitable for sealing laps on external breather membranes within both roof and wall applications.
Novia Breather Membrane Lap Tape has a durable acrylic dispersion adhesive and has a non-wove..
50mm Rockwool RW4 (80kg) is a robust, class A1 non-combustible resin bonded rigid insulation slab with an excellent fire, thermal and acoustic properties used for a wide range of building applications.
Rockwool Stone Wool Insulation Slab if correctly installed exceeds the minimum requirements of ..
50mm x 600mm x 1200mm Rockwool RW4 (80kg density) Class A1
Non-combustible resin bonded Rigid Stone Wool Insulation Slab RW4
Fire, thermal and acoustic slab used for a wide range of building applications
Manufactured in 80kg density per m3 - Class ‘0’ to Building Regulations
Used in floors, roofs at rafter level, partitions, ceilings, timber and steel frame walls
50mm SR/CW Partial Fill Cavity Wall Insulation Xtratherm Safe-R is a top-class phenolic foam rigid cavity insulation board with a low emissivity foil facings designed for use in traditional masonry walls.
A high-performance BBA certified 1200mm x 450mm x 50mm square edge board with an approved th..
50mm Framing Board Xtratherm Safe-R SR/FB is a top-class rigid foam phenolic insulation board with a low emissivity foil facings designed for use with steel and timber frame applications up to 18m in height.
A high-performance BBA certified phenolic 2400mm x 1200mm square edge panel with an appro..
Suitable for use in Steel and Timber Frame Systems
Superior Lambda Value as low as 0.021W/mK
Provides excellent U-Values and improved thermal bridging detailing
Can be used between studs or as an insulated sheathing board
50mm Rainscreen Cladding Insulation Xtratherm Safe-R SR/RS is a high-class rigid phenolic insulation board with a low emissivity foil facings designed for ventilated rainscreen cladding applications in new build and refurbishment projects
Xtratherm SR/RS 2400mm x 1200mm x 50mm insulation boards a..
Lower Lambda values for improved U-Values
Superior Lambda Value as low as 0.021W/mK
BBA Certified - Certification Number 10/4803
Tested and Approved under BS 8414 and BR135
Euroclass B Fire Classification - Rainscreen Applications
50mm Unilin SR/FB is an insulation board designed for use with steel or timber frame applications up to 11m in height, SR/FB can be also used between studs or as an insulated sheathing board.
Safe-R SR/FB is manufactured to EN 13166 by Unilin Insulation with certified lambda (thermal conductivity..
50mm Unilin XO/FB XtroLiner Framing Board is an insulation board designed for use in a wide range of constructions including steel or timber frame applications up to 11m in height.
XO/FB Framing Board used into the traditional cavity of the construction improves the value of the walls over the tr..
Unilin XO/FB XtroLiner Framing Board (Steel and Timber Frame Applications)
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
Used between studs or as an insulated sheathing in a wide range of constructions
Suitable for new build and refurbishment projects in buildings up to 11m in height
50mm Xtratherm Thin-R XT/CWP Cavity Wall Plus is a robust tongue and groove jointing PIR (polyisocyanurate) rigid insulation board with a low emissivity foil facings, used for traditional masonry partial fill cavity walls.
XT/CWP Cavity Wall Plus (T&G) is the best solution when building tradition..
50mm Xtratherm XT/CWP Cavity Wall Plus Insulation Board
Lower Lambda value (thermal conductivity) of 0.021 W/mK
Enhanced performance PIR (polyisocyanurate) rigid insulation
Easy to install tongue and groove (T&G) jointing system
Used as a traditional masonry partial fill cavity wall insulation
50mm Xtratherm Xtroliner XO/CW is an improved performance PIR (polyisocyanurate) tongue and groove insulation board with robust foil facings designed for partial fill cavity wall insulation with an approved thermal conductivity (lambda value) as low as 0.021W/mK.
This lower lambda improves U-Valu..
50mm Xtratherm Xtroliner Framing Board XO/FB is an improved performance PIR (polyisocyanurate) insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB framin..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
60mm Novia Metalised BOPP Tape 50m is a high strength often used adhesive tape used in vapour control and damp proofing applications as a final barrier to improve air tightness.
Novia Metallised reflective tape is made form Biaxially Oriented Polypropylene.
BOPP tape should be used in conjunct..
Incredible strength and reflectivity - Roll 60mm wide
Used as an overlap seal to improve air tightness
Use in conjunction with Novia Double Sided Butyl tape
Must be used when installing Novia Methane Pro barrier